Reviews
Firm Grip force
Product Name
PROGRIP Pro grip Seat cover
Item Number
PG5011S-G
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
1 hour
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, ClipGun, etc.
Why did you choose this product?
apprehensive
Product Name
PROGRIP Pro grip Seat cover
Item Number
PG5011S-G
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
1 hour
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, ClipGun, etc.
Why did you choose this product?
I often sit on a seat, so I was looking for a seat with good grip and found this one.
Was the one you received as per Image?
It was just like the Image. It has more gripping power than I expected.
Was the installation difficult?
It is difficult. It takes hang to put it up tight without too much.
How was your experience with it?
I am Large satisfied with the firm Grip force.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
To prevent scratches on Tank
I bought this to prevent scratches to the Tank as it is SS.
It is not limited to this product, but it is rather difficult to make sure that the center is exactly in the center when applying.
The adhesion is neither too strong nor too weak, and I think there is a good balance between strength that does not seem to peel off on its own and weakness that does not damage the paint when peeling it off.
The size is a little larger than the cheap ones from other companies, and the cover range is wider. The texture is glossy and gives a sense of high quality, but the durability against sunlight is yet to be seen.
View detail
Name Chain
I had put up a different one but immeChain.
I like the design and quality well enough.
Cheap counterfeit? I recommend that you use the genuine product.
View detail
It is good to be normal.
Second purchase for my wife's Motorcycle.
[How is it used?
Strip off the Chinese one and replace it with this one.
Was the one you received as per Image?
Yes
Was the installation difficult?
I applied it with one shot, not with water, but I couldn't apply it straight and had to reapply it.
How was your experience with it?
A few days, but no floating or peeling.
Mine, which I put up before, is currently fine.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If the backing paper is divided into two parts, it may be easier to paste it as it is.
View detail
Is good
Pasted on MT-25, SeatLimit from MTMark, so I removed Seat and pasted it.
I was worried about the green color of the other site's comments, but I am satisfied that it does not look greenish.
I have stuck a Chinese one from a certain jungle, but the adhesive strength is unmatched, and with proper degreasing, so far it is firmly attached to the edges.
I didn't know where to put the small ones, so I put them on my knees.
View detail
Like this
Neither good nor bad
This is how it feels.
View detail
It's neither good nor bad
Well, a common and ordinary Tank Pad.
I was wondering if it was a pachimon? I was not sure about the quality of the product, but I decided to go with this one because it seems to be of delicate quality.
I don't have anything special to say about it, but it seems to be durable.
View detail
for Off-RoadSeat
[How is it used?
Seat was damaged and I purchased it as a Replace.
I initially purchased one from another manufacturer, but the material did not stretch and was difficult to install, and the product seemed unsuitable for off-road use, so I repurchased this one.
Was the one you received as per Image?
I purchased the Small size.
I think it is generally as shown in the picture.
Was the installation difficult?
It took some time, but it was easy to put on compared to my previous purchase.
Tucker will be required.
How was your experience with it?
I have not done any off-road driving yet, but the gripping force seems to be very high and the performance seems to be perfect.
[Included Parts:were they on?
WaterproofSeatetc. is not included, so I diverted it from another product and used it, but I think Large is sturdy without it.
[Was there anything that disappointed you?
There was not much.
View detail
Even my muddy butt in Muddy won't slip!
Normal seat of CRF125F is suitable for muddy driving such as Enduro.
I was concerned that it would slip easily.
I consulted with a friend who rides the same type of car, and immediately this Seat cover
He told me about it, so I bought it and installed it.
Grip has been outstanding, and Large was right to reupholster it!
It is very comfortable to use, even with my butt covered in mud during the Muddy Race.
Riding is easy.
If you want, there should be a color range that matches the body color and the manufacturer color.
I thought it was good.
View detail
I'm not sure what to do.
The season was getting better, and I took out my Goggles to go for a short walk in the neighborhood, only to find that they were cloudy and had a crease on them.
The body sponge also looks a little damaged. I wondered whether I should replace the entire body or only the Lens, but I decided to replace only the Lens.
Replacement is very easy. The difference in transparency is obvious. I was told that delivery would be delayed due to a warehouse relocation, but it arrived early and made my touring more comfortable.
View detail
Just put it on and it has a Fashion feel.
[How is it used?
I purchased this product to prevent scratches and dress-up my XJR400R.
Was the one you received as per Image?
It was just like the image, and I am satisfied with the carbon style without feeling cheap and uncomfortable after pasting it on.
How was your experience with it?
I can't say anything about the defensive performance because Zipperetc. never hits it.
However, I think it is very good because it has a dress-up effect (a sense of fashion) just by putting it on.
[Points to note]
Before applying, degrease thoroughly with Parts cleaneretc.
How did it compare to other products?
The thicker types like those of other products look uncomfortable when viewed from the side, so I think a thin type like this product is good because it blends in with the original design of the car body.
View detail
It's definitely easier to ride than OEM.
[How is it used?
I used this seat on my CRF250RX, and although I was not dissatisfied with the large OEM seat, I felt that the bike was moving forward when I rode up Woods and I felt that my body was being left behind. I had changed from a normal seat to a high grip seat on my SEROW and it was much easier, so I bought this seat in the hope that it would make riding easier this time. In addition, I also removed the bean paste.
Was the one you received as per Image?
It was much more spacious than I had imagined.
Was the installation difficult?
I once reupholstered a SEROW with a dubious High gripSeat that I purchased in a jungle for about $2000. I remember that it was rather difficult. Compared to that, this was much easier. It stretches well.
If I may say so, the length is a little too long, and the logo of PROGRIP went to the back of the Seat, and I had to cut it off in tears. For foreign cars?
How was your experience with it?
Not at all. They eat a lot.
When sitting, my body is no longer left behind. And not only during sitting, but also in standing posture, I can feel that I am holding the body not only by my ankles but also by my inner thighs.
Up and down Quantity:Pair (for Left and Right) This snagging may be a concern for Motocross and other busy motors that are moving from one place to another.
[Included Parts:were they on?
This product only.
[Was there anything that disappointed you?
The performance is totally satisfactory.
I repaired it with Stapler and Bond, but I was a little disappointed.
Other items that would be helpful
Installation Point or hang
→ When reupholstering, it would be a good idea to cover the Seat's Urethane with a Vinyl bag to prevent water from getting in if this gets torn in the future.
View detail
Durable and Parenthesis good
[How is it used?
Used for riding around town and commuting. seat cover was torn so I reupholstered it myself.
Was the one you received as per Image?
The fabric has elasticity.
How was your experience with it?
Grip is satisfied even with Standard Type.
[Points to note]
If you want to reupholster it yourself, I think you can do it well if you hit the tucker while the seat cover is stretched by Clip or other means.
How did it compare to other products?
I have not compared it to other companies' Replace products, but I think it is sturdier than OEM and has better grips and looks better.
View detail
Good
I used this Seat cover on my 08 klx250 Seat after modifying it to a high seat myself. It is a high grip seat, but it is not that hard to ride. View detail
Overwhelming Grip
[How is it used?
I'm playing Enduro and playing with it.
I ride a lot in Sitting and I always reupholster with this Seat cover to keep my body from falling behind.
I bought it again because I replaced my car this time.
Was the one you received as per Image?
This is my third time so I received something familiar.
Was the installation difficult?
One of the features of this Seat cover is that it is easy to apply.
Anyway, it stretches well.
How was your experience with it?
It's probably the most grippy Seat cover without Rib.
Your body will no longer lag and it will be easier.
[Included Parts:were they on?
Nothing in particular, although the Off-road system has a Large Body Sticker in it.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It is hang to put it while pulling it as if it were this.
View detail
Best.
The design is large and the size is large. The texture is a little bit better than I expected. View detail
Grip strength is unmistakable.
I chose this one to change the upholstery of the Spiral footpegSeat for the WR250X.
The SIDE area is quite limitless, but I was able to reupholster it if I was willing to die to pull it.
Of course, I chose the Supper Grip because I use it for the road race. I couldn't grip the suit well because it was too smooth, but after I reupholstered it, it is very firm. Grip.
I don't think there's a Seat to grip any more - Recommendation.
View detail
Size and Design are perfect The hittiness is good
Well, I think the price can be kept down a bit more, right? I think Isn't that why fake products are available at low prices? And Basically, RiderGoods is expensive or.. (Sweat)
View detail
It's an itchy, itchy, tank scratch prevention
Fastener hits the Tank, so a Tank Pad is a must
There are a lot of taller ones for the CBR250RR, but none of them have a shape that can be protected I arrived at this product
The design is simple and perfect with this product to protect it from the trunk to the front of the seat It is
But depending on how you apply it, it can be a little difficult to apply the tight parts of the R's
View detail
Commonly usable
Ninja400 (18) Attached to
I could stick it on normally, and even if I failed, I could reapply it twice Recommended for
The adhesive strength is a little weak, but it didn't come off while driving, so I guess it's enough adhesive strength for me
It looks great with Carbon Style and Black Tank
View detail