Reviews
ZOOMER's Custom
Thank you very much for the fast shipping and careful packaging. View detail
Fits: YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith)
Easy to install
I had been interested in these Parts for a long time, but I wish I had bought them earlier because they are easy to replace and functionally the best in terms of cost performance.
I don't ride much, but I hope that Spring won't be damaged and that it won't affect Seat and the body of the car.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS Gryphus, YAMAHA CYGNUS X, YAMAHA FORCE, YAMAHA BW'S125, YAMAHA BW'S X, YAMAHA BW'S 125, YAMAHA BW'S R, YAMAHA MAJESTYS, YAMAHA MAJESTYS, YAMAHA SMAX, YAMAHA SMAX
The color was what I wanted.
There are four in total, but the bolt behind the Right Side did not fit, so I had to file down the body and managed to install it. I think it is an individual difference, but this is acceptable. I am glad that it was only this much because it is a visual effect part and if it needs to be modified so much that it changes from the original model, it would be meaningless to replace it. View detail
To light the Rear box
Purchased to attach Rear box.
Installation was easy and Box is ready to install.
Touring is going to be comfortable.
View detail
For prevention of dirt on rear suspension
Installed to prevent dirt around the rear suspension and link plate.
I was able to install it on our MAJESTYS without any particular modification, so perhaps it is designed for the previous term.
The texture is exactly like plastic, so if you are concerned about it, you may want to paint it black or the same color as the body.
The Screw rusted quickly, as everyone has said. Since it is not something that is frequently seen and is not a concern, we have not replaced it and have only treated it with a rust-converting agent.
This product is recommended not only for Fender Eliminator users but also for normal fenders, as it can significantly reduce mud splashes around the rear suspension area, Air cleanerBox, and Silencer.
View detail
For CROSS CUBJA45.
Texture is sufficient
Unlike KITACO products, the letters are not engraved.
Double-sided tape seems somewhat unreliable
View detail
coordination required
The OEM Carrier was RustRust and did not look good, so I bought this one. When installing it, the bolt holes were gapped by about 5mm on the One Side, so I widened them by force to match the holes in the car body. View detail
Koo~ Oshii ?? (?"-??? -?) ?".
I used to get frustrated when I couldn't remove the CALI Sticker from my Number because I couldn't remove it to Beauty, but thanks to you, I'm going to be free from frustration ^^.
I think it is a good purchase because it can also serve as one point of dress-up.
…… is,
When I installed it, it was too close to the NumberLeft hiragana, so it took about a quarter of the time as it was.
The hole was enlarged horizontally in Drill and shifted to the Limit to finally achieve the current shape (see image).
I can't say for sure, because the form of Number varies from region to region, but at least in my area Number requires processing ^^;.
I also thought it would have been better if the four corners were slightly rounded.
View detail
Fits: HONDA Lead 50, HONDA ZOOMER(Ruckus), HONDA TODAY, HONDA CREA SCOOPY, HONDA JULIO, HONDA Giorno, HONDA Giorno, HONDA GIORNO CREA, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SMART DIO, HONDA TACT, HONDA TACT, HONDA TACT, HONDA DIO(4Cycle), HONDA DIO FIT, HONDA TOPIC, HONDA Byte, HONDA LIVE DIO, HONDA LIVE DIO
It was Garbage,,, it's Aluminum, so it will be crushed.
I didn't expect the material to be Aluminum...it doesn't say anywhere, so I didn't know what it was and I bought it.
Since it is Aluminum, it is just tightened with the stipulated Torque, but it crushes easily and makes no sense.
I'm crushed when I run after installation and I don't see any difference in acceleration.
I use a lot of KN projects because they are inexpensive and available, but this was Garbage.
View detail
Large carrying capacity which makes it perfect for loading up the Monkey for a weekend away
About quality and texture, I can confirm that the quality is good and that the material used is steel tubing and finished with a black painted coating before I had the chrome plated finish added to better suit the styling of the Monkey. About the feeling of use, This rear rack has a large carrying capacity which makes it perfect for loading up the Monkey for a weekend away . Products to buy together, To get the most use out of the rear rack if styling is not your solo purpose it would be ideal to add a small tail bag to your cart so the option to carry a small load is always available to you. Difficulty of installation, I can say the fitment of the rear rack was very easy due to the simple nature of the install and relatively easy access to the four mounting points to secure the rack with the included hardware and some original hardware. Cost performance and comparison with other products, The pricing of the product is good. You receive a rear rack with a great carrying capacity but the finish was not to my liking. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Required for Fender Eliminator vehicles.
To increase the rigidity, I used Cemedine's METAL LOCK to fix the License Plate Holder firmly and attached it to the Reflector Bracket. View detail
Fits: HONDA CHALY, HONDA SMART DIO Z4, HONDA LIVE DIO, HONDA LIVE DIOJ, HONDA LIVE DIOS, HONDA LIVE DIOSR, HONDA LIVE DIOZX, HONDA SUPER DIO, HONDA SUPER CUB, HONDA SUPER CUB, HONDA SUPER CUB, HONDA SUPER CUB, HONDA SUPER CUB, HONDA PCX125, HONDA PCX150, HONDA Spacy100, HONDA TODAYTODAY, HONDA DIO DIO, HONDA DIO DIO CHESTA, HONDA Giorno
Looks cool.
Anyway, since it is a race ish, it is similar to KITACO's discontinued product, but if you put it on CHALY and start off on a slope, high-octane gasoline will leak just a little bit, but I forgive it because it looks cool! View detail
Use with Bush Face's License Plate Holder.
I combined it with PolishFace's License Plate Holder. I use Cemedine's METAL Lock to fix the Holder and Bracket tightly. It has a good feeling of rigidity. View detail
For a little Accent
[How is it used?
The bolts that hold up the exterior of my long-owned motorcycle have become rusted over the years, If we're going to replace the Bolt anyway, let's put some Accent in it." This product was purchased to match the Cap bolt with the
The several color variations are useful because they allow Spacer to be used in accordance with the color of the car body.
Was the one you received as per Image?
Standard for this type of aluminum spacer. FUJI TUBO type. The product was just as beautiful as the image on Webike's website, and it was exactly as shown in the image, without the uneven staining that is common in low-priced aluminum collars from other companies.
Was the installation difficult?
There is nothing difficult about this product, as it is installed by biting it in place of a washer when using a cap bolt.
How was your experience with it?
Since it is made of aluminum material, each piece is light in weight and can also serve as a washer, making it a very convenient product that can be used in a wide range of applications.
The BoltSingle Body can be used as a one-point accent when installing the License Plate, which is not so easy with the BoltSingle Body.
It is not lightweight, reinforced, etc. (strictly speaking, there is a slight increase in color), and it costs a lot of money, but I like this kind of product, and I am very grateful for it.
The appearance is that of the FUJI TSUBO Type Design from a generation ago, so in the age of 2025 Fashion!" I'm not a middle-aged person, but I'm not a trendy middle-aged person.
[Included Parts:were they on?
None
2 piecesQuantity:The price for the set is 880 yen, and I would appreciate it even more if it were a little cheaper, but the product is out of season, so I guess I should be glad that it is on the market.
[Was there anything that disappointed you?
If you like the design as shown in Webike's image, you can buy it. Disappointing. It is lightweight enough.
Make good use of the wide selection of 9 colors to add flair to the Accent of your car body.
Other items that would be helpful
Point and hang of installation
As mentioned above, it is like a fashion color used in place of a bolt washer, so it is a simple job to use the Barnacle Collar when attaching a cap bolt of the appropriate length to the bolt stop on the attachable part.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of understanding is at the top level, so I don't think that wrong usage is likely to occur (unless you get twisted and use it in a different way on purpose).
[Notes]
None in particular, in Color variations. The color tones are different from what I saw in the picture." There may be some things that are not so common in motorcycle accessory stores anymore, but that may not be a problem.
[ITEMS TO BUY TOGETHER
Cap boltTypeExclusive Since it is like a collar, please purchase a cap bolt of each material & length that you want to install.
[Opinions and requests to Manufacturer
It is easy to purchase large quantities if the price is a little lower, so a quantity of 10 pieces is 10% cheaper.:A Set would be even more appreciated, please.
View detail
Custom
Recommended for those who do not want to put CALSeal directly on the License Plate! View detail
Fitting is outstanding!
The fitting is good and I am satisfied with Large! View detail
Fits: HONDA Claire's Coupe AF55, HONDA Claire's Coupe AF55
Wrinkle is noticeable.
The entire pull will be Wrinkle. View detail
with Rubber so it can be used for Seat cover or reupholstery.
[How is it used?
Seat of LITTLE CUB, which was given to us and had been neglected for a long period of time, was exposed to UV rays and had some tears. Let's reupholster it honestly." I wandered around Webike's site and came across this product.
The fabric is thin, but the OEM is also thin, so I have a faint hope that it will last a long time as long as it is kept out of the UV rays in the garage or body coverretc. when not being ridden.
How was your experience with it?
I am very satisfied with the large cover, as it has improved the comfort to the point that it would be rude to compare it to the aging OEMSeat Cover.
How did it compare to other products?
There are some inexpensive Seat Covers on the market, but I could not find a color tone that I liked, and color custom orders were too expensive, so I was wandering around Webike's site when I came across this product. Seat Grips. The stability of the event is irreplaceable.
[Points to note]
In my case, as I mentioned above. Seat cover. The assumption is that it is being used as a For re-covering Seat fabric, not as a
1. To remove the old Seat Cover, remove the Seat from the car body (the Seat can be removed by removing the two Bolts at the tip) and then unscrew the Bracket (Bracket plastic) that is fastened to the base behind the Seat, one by one, in a humble manner.
Remove the old skin and check the damage to Seat's sponge, and correct it if necessary.
3. Put the new Seat Cover on the front and back using a Tucker (a device similar to a large-mesh Stapler).:Pair (for Left and Right) (The front part is difficult to fasten with a standard tucker, so in some cases, a small wooden screw is used to fasten it.)
4. Put it back on the car body and you are done.
Other items that would be helpful
【Included Parts:presence or absence】.
One brief instruction sheet is included in the Seat Fabric Body.
If you are new to this, it may be difficult to understand, so please use each video Site. Motorcycle Seat Replacement Please search in etc.
[ITEMS TO BUY TOGETHER
Slotted screwdrivers and radio pliersetc. are helpful when removing old Seat Covers.
When attaching a new Seat Cover, you will need a Tucker & Staple to proceed with the work itself.
[Opinions and requests to Manufacturer
I would be very happy if there were more color variations, just a typical color pattern would be nice.
View detail
For Screen Fixation
I bought this one for a trial so that I can easily clean the screen and remove it.
I wanted Black, but it was out of stock, so it is Silver.
As expected, the Screw head is Large.
It would be better if it were smaller and less conspicuous.
This is what we plan to use for other purposes.
View detail
The screw is iron
In the photo, the screw is Material:It looked like Stainless Steel, but in fact it was a cheap chrome plated iron screw. I think that people who install such parts should be particular about the threads. I went to buy Stainless Steel screws as soon as I could. (M6, 20mm length, 25mm quantity):(2pc) View detail