Reviews
Large modification is required and out of the question as a vehicle-specific kit.
OEM Blinker cannot be installed as is.
The only way is to process this product or Blinker into a Large size.
It is not a Level that doesn't fit a bit, so if you buy it, you should be aware of that.
Incidentally, Webig's conformity guarantee does not cover this degree of processing.
Below is the response I received when I inquired about the conformity guarantee.
------
For more information about the conformity of this product in our company, please contact us,
If the four holes of the product can be installed on the Rear side of the vehicle through the Bolt, the product is considered to be compatible.
Fixing the above to the vehicle. Conformity Assurance The following is a summary of the results of the survey.
View detail
WR3 Frame cap
Is the texture slightly less luxurious because it is plastic?
Rubber packing is also included, so the hold feeling is perfect.
The holes are slightly larger than the holes in the frame, making it easier to remove the frame.
I chose Black, and it matched the Frame and gave me a sense of unity.
View detail
Impressions at Corner
In NORMAL condition, it was difficult to hold the tank, but after attaching this product, the tank was held firmly and the vehicle was able to run in a stable manner. The price was reasonable and I was satisfied with the Large size. View detail
It will last longer than the Songe.
I was looking for something better and found this product.
No particular problems as long as the positioning and degreasing are done properly. It is a good product because it is thick and easy to grip.
View detail
Fits: KAWASAKI Ninja 150RR, KAWASAKI Ninja 150R, KAWASAKI Ninja 150RR, KAWASAKI Ninja 150R
BoltQuantity:Mounted with 2pcs.
It is easier to change the front sprocket, after running with a lot of chain oil, oil is flying all around. The look is different from the NORMAL by a large amount. View detail
Fits: YAMAHA XMAX 250, YAMAHA XMAX300, YAMAHA XMAX300
Simple is good.
There are no unnecessary decorations.
There are no adjustment functions such as accuracy.
Instead, I like its Simplicity.
Since the same screw holes are used as those of the YAMAHAOEM Tandem Backrest, the backrest will be slightly tilted when installed at the same time.
but not enough to be bothersome.
View detail
Fits: YAMAHA XMAX 250, YAMAHA XMAX300, YAMAHA XMAX300
Simultaneous installation with OEMBackrest is △.
When connecting with YAMAHAOEMBACKREST at the same time, the thickness of this kit will cause the backrest to shift.
Maybe I should adjust it with a washer or something, but I use it as it is.
Even without imposing it as a measure, there are no particular problems with its appearance or strength, but perfectionists should beware.
View detail
For decoration
It is easy to install., I think it looks and feels custom. View detail
Recommendation of otherManufacturers, even if expensive.
It looks there, but it comes off easily by hand even if it is fitted in.
Other Manufacturers have Quantity on the reverse side.:Pair (for Left and Right) The shape differs in the following two cases, but this is the same.
So I think the hooking is not so good.
If the gold price were lower, it would be acceptable, but since the price is so high, it would be better to pay a little more and buy another Manufacturer.
View detail
Fits: YAMAHA XMAX 250, YAMAHA XMAX300, YAMAHA XMAX300
Costa is outstanding♪
I wondered about this product since it was only available on Webike. I wondered how it would be, but it turns out that Material is Material.:The price was the cheapest among other XMAX Fender Eliminator kits, but considering the functionality, I think it is the most cost-effective. I would have given it a perfect score if it came with a … light, but I used one from another License Plate Kit and drilled a hole to attach it, but it's aluminum, so drilling is easy, and I gave it a perfect score. View detail
It is lightweight, but…
Since the kit itself is aluminum and of small type, it is quite light and has a good design, so I am satisfied with it as a kit.
I was thinking of using OEM parts from Blinker to License Plate Light, but it seems that it is not possible to use them by simply installing them.
The angle of the license plate is not bad, and the kit can be installed without any problem.
The finish of the parts are made in a foreign country, and there are some scratches due to insufficient packaging, but once installed, they are not noticeable, so I was able to cover them up with the enclosed Sticker and forgive them. (Lol)
Overall, I think the price is a little high for such a small amount of content, but depending on the customization, the Rear O-Bar handle portion may be finished quite lightly.
It is not easy to find vehicles that have them installed, and most importantly, they are lightweight, so I plan to install them in a planned manner while having a lot of fun.
View detail
Aligned with the color of Chain.
I made it Gold to match the color of Chain.
I am satisfied with the change in appearance more than I expected.
View detail
The finish is not so good.
I was not expecting so much from the Pivot Cover, but I bought it because I wanted to cover the Pivot hole for now.
The actual product is of foreign quality as expected.
The body is plastic, with color rings in aluminum, the surface is covered with small scratches, and the back side has BALI.
The friction of the O-ring holds the type in place, and the shallow angle makes it difficult to insert the O-ring unless it is tapped against the wood.
The design and dimensions are fine, so I put it at 4, but it is not a recommendation for those who seek the beauty of bonsai parts.
View detail
not sticking (e.g. to)
It won't stick unless you process it first.
Screw, Bracket, all sorts of things.
Difficult without processing technology
View detail
nonconforming
I bought this to install on my Z650 '18.
There is a guarantee of conformity, but it is a non-conforming product.
In the picture, there are Z650-17UP and Ninja650-17UP, but the shaft diameter is different from ZX-25R.
There's no way it fits. (The compatibility of ZX-25R has not been confirmed yet) 。
Because I asked Motorcycle shop to install it, I missed the deadline to return it, and I am in the worst situation of losing money.
What is a conformity guarantee?
Guarantee?
If you are considering using it on a Ninja 650 or Z650, do not buy it! (Unless you have a replacement for the mounting part) 。
View detail
Perfect!
When I installed it, it wasn't sticky enough and it would lift right off, but after holding it down for a while, it stuck, and I've run it a few times and so far it's sticking!
It is Exactly because it is an exclusive product. The Logo sticker of the attachment was not put because it was a cheap feeling round!
View detail
I was satisfied
I felt that the color was a little too dark.
I am very happy with the product.
After that, I feel it is expensive in terms of cost.
View detail
You'll have to wait two months.
I ordered it on October 2 and it's been postponed twice and will be November 25. Maybe it will be postponed again? I suggest you don't order it here, buy it elsewhere! You won't get it! View detail