Reviews
LengthQuantity:It is helpful that 2 sets are included.
Quantity out of 4 Bolts:15mm and 20mmQuantity as 2pcs are 25mm:This one from Set is just right. I had purchased another color before so I knew the quality was good. View detail
Fits: HONDA CB1000R, HONDA CB1300S, HONDA CBR650F, HONDA CRF1000, HONDA CRF1100, HONDA CRF250RLAC, HONDA GROM125G, HONDA CBR250RR, HONDA CB400SF, HONDA CBR650R
To PetitCustom
I think it is good because it looks different.
It would be better if it were cheaper.
View detail
For a little dress-up
We had originally chosen Gold, but decided on Black for its affinity with ImeChain and Screen.
The rigidity as Bolt is fine and the color is beautiful.
I installed it on a ZrX1200DAEG, but be careful not to make a mistake because the two in the middle are just a little bit longer.
View detail
Fits: KAWASAKI ZZR1400 06-08, KAWASAKI ZZR1400 ABS 06-08, KAWASAKI 1400 GTR 08, KAWASAKI ER6 n 06-08, KAWASAKI ER6 f 06-08, KAWASAKI VERSYS 07-08, KAWASAKI Z750 07-08, KAWASAKI Z1000 07-08, KAWASAKI ZRX1200 DAEG, KAWASAKI ZX-10 R 06-10, KAWASAKI ZRX1200, KAWASAKI ZX-6 R 07-08, KAWASAKI ZX9 R 00-03, KAWASAKI ZZR1200
Gold looks good!
This time, I could not buy it at WeBig because they were out of stock.
I found it in stock at Naps and bought it, so I will only give an imprementation.
(It was cheaper to buy from WeBig.)
Anodized is beautiful and I liked that it was the same color as the other custom parts.
I think it is the same shade as Posh and Babyface Gold.
The installation took less than 5 minutes as I only had to replace the original Bolt.
It's good because it's easy to dress-up, but I wish the price was a little lower.
View detail
One point, but it is moderately conspicuous.
The visual effect is very good, except for the high price. View detail
Fits: HONDA CB1000R, HONDA CB1300S, HONDA CBR650F, HONDA CRF1000, HONDA CRF1100, HONDA CRF250RLAC, HONDA GROM125G, HONDA CBR250RR, HONDA CB400SF, HONDA CBR650R
Dress-up.
These are completely self-satisfied dress-up parts.
I'm happy with it myself, but it's expensive!
View detail
Fits: SUZUKI GSX-R, SUZUKI GSX-R 600, SUZUKI GSX-R 750, SUZUKI GSX1300 R HAYABUSA, SUZUKI SV1000, SUZUKI SV400, SUZUKI SV650, SUZUKI V-STROM 1000, SUZUKI V-STROM 650, SUZUKI , SUZUKI Bandit 1200, SUZUKI GS1200 SS, SUZUKI GSX1100 S 97-07, SUZUKI GSX1400, SUZUKI INAZUMA 1200, SUZUKI INAZUMA 400, SUZUKI INAZUMA 750, SUZUKI TL1000 02-03, SUZUKI TL1000 R 02-03
Looks Parenthesis good!
We have installed them on all of our recent and previous Motorcycle models.
It's one point, but it looks better and I like the Large change every time.
It would be nice if it were a little cheaper!
View detail
Fits: HONDA CBR900RR, HONDA CBR600F4, HONDA CBR1100XX, HONDA CB1300SF, HONDA CB400SB, HONDA CB400SF, HONDA CB1300SB, HONDA CB1300ST, HONDA VTR1000 SP-1, HONDA VTR1000 SP-2, HONDA CBR600RR, HONDA CBR1000RR, HONDA CBR929RR, HONDA CBR954RR
attractive red
The bike is CB400 red, so I think it will go well with the Bolt color steel. I like it so much.
Delivery was a little slower than expected due to customs clearance issues, but I am very happy to have purchased a chain of good quality.
It hasn't been installed yet, but it looks really pretty when installed on the fuel tank along with the 25th anniversary sticker I ordered.
-------------------------------------------------- -------- The bike is cb400 red, so it seems to go well with the bolt color. I like it so much. The delivery was a bit slower than I thought due to customs clearance, but I am very happy to buy a good quality chain. It's still before mounting, but it's too pretty to be mounted on the fuel tank with the 25th anniversary sticker ordered together. Powered by Google Translator
View detail
Fits: SUZUKI GSX1300R HAYABUSA
Be careful, because it is easy to get nudged!
Since the Swarovski is in the hexagonal hole, the hexagon is shallowly inserted, so if you use a hexagon with a rounded tip, it will be shallow and the anodized paint will peel off, making it look bad.
I had to repurchase because the last one I bought was a little peeling.
But it's inexpensive, looks good, and it's a good decision to replace it.
View detail
Fits: KAWASAKI ZZR1400 ABS 06-08, KAWASAKI ZZR1400 06-08, KAWASAKI ZZR1200, KAWASAKI ZX9 R 00-03, KAWASAKI ZX-6 R 07-08, KAWASAKI ZX-10 R 06-10, KAWASAKI ZRX1200, KAWASAKI ZRX1200 DAEG, KAWASAKI Z750 07-08, KAWASAKI Z1000 07-08, KAWASAKI VERSYS 07-08, KAWASAKI ER6 n 06-08, KAWASAKI ER6 f 06-08, KAWASAKI 1400 GTR 08
Save money compared to buying at Rose!
Bolt set for KAWASAKI 5-HoleTank cap.
I was thinking about whether to go with Black or Silver, and then I found this color.
In terms of color, the Magnesium color used for the engine cover of the ninjaZX-R has a shiny finish, giving it a familiar feel.
If you are a serious person, you may compare the model in the fitment with the Parts List for the Z900RS and think that the dimensions are different.
But Large sturdy. To begin with, there are only three left alive, and the remainingQuantity:Because 2pc is Dummy.
Replacement itself is easy, but be careful not to allow accumulated sand and dust to get into the tank or screw holes.
In order to avoid corrosion and galling due to potential difference and other unnecessary troubles, it is recommended to use a compound compound that can be applied to the surface of the substrate.
Since you will be using 5 bottles, it is Wallet-friendly to have the necessary Size 5 Pack.
I have not read anywhere about this Bolt, but it seems to be a very Duralumin.
If not, why don't you write Material?
View detail
Not exactly.
The OEM Product's fixation is a bit odd to take off and put on Large, so I bought this one to try it out, but the Large size is still different and seems more noticeable than the OEM. The design is not bad in appearance.
Well nut also Quantity:I wish it was a Set.
View detail
Screen Fixation
I was wondering if it is possible to fix the screen by changing from OEM Product to this one. I bought it for a trial because the evaluation was not so bad.
Is it too conspicuous in terms of balance since the head is larger than OEM?
It would have been nice if well nut was also sold with it. Too bad.
View detail
Fits: HONDA GROM125G, HONDA CBR650R, HONDA CBR650F, HONDA CRF250RLAC, HONDA CRF1100, HONDA CRF1000, HONDA CB1000R, HONDA CB1300S, HONDA CBR250RR, HONDA CB400SF
Expensive, but very beautiful coloring and recommendation to Dress-up!
[How is it used?
Since the 14LiterTank of the unbranded CB1100 was replaced with an EXSecond Type Model 16LiterTank, the Bolt was also replaced!
Was the one you received as per Image?
As mentioned in other impressions, the color is similar to Orange, even though it is Gold.
The color is more beautiful than the Image.:Being aluminum, it is very light.
Was the installation difficult?
Since it is a bolt replacement, it can be easily done with a Hexagonal Wrench.
How was your experience with it?
It is satisfying because it is a place that I usually see often.
Especially when refueling, I get a smirk on my face.
[Included Parts:were they on?
There is no other way but Bolt.
[Was there anything that disappointed you?
Nothing in particular. However, I think 2,420 yen for 5 Bolts is expensive.
If too much torque is applied, the bolt will break, so it must be tightened at the specified torque. If only one bolt breaks, the quantity:I am concerned because it will be a Set purchase.
View detail
I wanted something thin.
I purchased these for the Rear Fender and to absorb vibration of the car body.
I put it on an area where there would be a lot of vibration, and it feels better to have it than not to have it.
I like that it's not too thick and not too wild.
View detail
Real Carbon's pattern is beautiful.
I used this when installing TSR's Radiator guard on my CB1300SF.
Since we chose black color Radiator guard, the OEM screws (silver) looked floating, so we combined black dyed Button bolt and CarbonWasher. The black-dyed button bolt has a small diameter, so we tightened it with the CarbonWasher.
I am satisfied with the high quality of Carbon.
View detail
Fits: KAWASAKI ZZR1400 ABS, KAWASAKI ZZR1400, KAWASAKI ZX9 R, KAWASAKI ZX-6 R, KAWASAKI ZX-10 R, KAWASAKI Z1000, KAWASAKI VERSYS, KAWASAKI ER6 n, KAWASAKI ER6 f, KAWASAKI 1400 GTR, KAWASAKI Z750 07-08, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200, KAWASAKI ZZR1200
Mount Screw
I was looking for a black Titanium, but I couldn't find a good one, so I chose this one. I tightened the bolt lightly by hand until it stopped, but when I looked closely, I found that the screw at the tip of the bolt had been crushed. I thought there was a problem with the Bolt, because the other Bolts I had went in without any problem. It is a waste of money, but I am afraid to use a tool to tighten it, so I will look for another one. View detail
Dress-up where you can almost only see yourself
I bought it because I miss the area around the fuel filler port.
Simply replace the OEM Bolt for a quick and easy dress-up.
I just have to wonder what color to use.
View detail
It was good
It is M8 Nut (Red) and I am happy with the color and finish.
However, I am concerned that they are easily scratched when tightened.
View detail
Fits: Others
Repeat
I bought Gold last time and the color was so good that I decided to repeat it this time. I was worried about the color of Green Light, but it was a good decision to choose this Green Light. View detail
Fits: HONDA GROM125G, HONDA CBR650R, HONDA CBR650F, HONDA CRF250RLAC, HONDA CRF1100, HONDA CRF1000, HONDA CB1000R, HONDA CB1300S, HONDA CBR250RR, HONDA CB400SF
Tank cap bolt
It was hard to find one for Honda5-Hole and I had given up on it, but I finally found one.
It is a world of self-satisfaction, but it is satisfying.
View detail