Reviews
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
SNIPERSNIPERFrame Hole Cap
I was concerned about the hole, so I put it on. one point and it looks good. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Flexible angles
I was looking for something with an adjustable angle and came across this Fender lessKit.
This was my first time replacing it myself, but I was able to install it without any problems!
I tried to install it, but it stood out because the body is black and the kit is silver, so I painted it black and reinstalled it.
I am satisfied with the product, but if I had to say something, I would say that the License Plate Light is a bit large and assertive.
The angle of the Number can be adjusted, but not the back petals.
(I fix it at less than 40-Degrees inside the regulations)
I use the Nano Blinker, so I have not used the included Blinker sTaperts. I was satisfied with the product for such flexibility!
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA DAX125, HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125
This is a great sprocket.
When replacing the small gear, I replaced it with a titanium bolt. The titanium bolt was not visible in the original cover, so I searched for several products. Among the sprocket covers, I chose this product because it made almost the entire small gear visible. I am very satisfied after trying it out myself. -------------------------------------------------- -------- We replaced it with a titanium bolt while replacing the small gear. The genuine cover was not visible, so I looked for several products, and I chose because this product could make it look almost all of the whole gear during the Sprokit cover. I'm so satisfied with it. Powered by Google Translator View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA DAX125, HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125
Sprocket cover installation
DAX125 has a lot of plating parts, and I was right in choosing Silver. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA DAX125, HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125
Gives a clean, uncluttered impression
OEM's heavy Sprocket Cover was replaced for a cleaner look.
Whether maintenance is also improved is to be confirmed after using it in the future. At a glance, it seems to be easy to clean.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
The Fender Eliminator offers a degree of freedom unmatched by other companies.
Blinker, reflector, and all other parts can be removed and reassembled to suit your specs!
However, it is a bit heavy and the screws are not reliable.
View detail
Sporty impression and Rear is Refreshing.
Mounted on z900rs.
The price is higher than others, but I would seriously recommend it.
The texture is different. Since this is an expensive motorcycle, I think it is right to install a suitable product without lowering the value of the motorcycle.
However, I think the design is more along the lines of Sporty than old car style.
One concern was that the variable angle of the Number fixing pedestal might not pass vehicle inspections. There was a concern that the variable angle of the Number fixing pedestal may not pass vehicle inspections. Please check with Dealeretc. for details.
View detail
Aluminum texture is awesome!
The thick aluminum texture has volume. The angle of the Number can be easily adjusted later. View detail
Very handsome short tail bracket
The workmanship is very good, the angle can be adjusted freely, the license plate can be straight up without punching holes, that is, the domestic yellow card is slightly larger but does not affect the use. Because I don't ride a bike in rainy days, and I don't worry about the problem of throwing mud, anyway, it's just handsome enough. Suggestion: It would be better if the parts where the red reflective blocks are installed can be designed to be longer (about 4cm longer) and have a larger adjustable range. -------------------------------------------------- -------- The workmanship is very good, and the angle can be adjusted freely. You can go straight without punching. It is a little bigger in the country in China but does not affect the use. Because you do n 't ride a bike on rainy days, and you are not worried about the problem of dumping mud. Anyway, you are handsome enough. Suggestion: If it can be designed longer (about 4cm longer), it can be designed with the parts of the red blocks. Powered by Google Translator View detail
yzfr7Fender Eliminator
Material:It is Aluminum and lightweight. It is nice to be able to change the angle of the Number because of legal regulations. Screw lock was used for mounting each part, but since there is a possibility that the screws may loosen due to vibration, each part is fixed with strong adhesive. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
The mounting Bolt broke.
One Side ran away from home after the head of the M4Bolt broke off after 1300 km of driving.
I didn't want it to come loose and fall out, so I tightened it with a medium-strength Screw lock.
Maybe the very low head Bolt was a disaster, or maybe I applied too much tightening Torque.
Quantity in Swingarm Pivot Shaft:Pair (for Left and Right) The reason for this may be due to the pull-pull of the shaft that is connecting the two cables, but at any rate, the shaft broke.
I will try to REPEAT and take action.
First, the M4 ultra-low head bolt was replaced with a Stainless Steel button bolt.
CapBody is temporarily fixed with liquid Gasetc.
Preventing shake by using seal tapeetc. on the shaft.
If I try all this and it doesn't work, I'll give up.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
good product
It is a very nice product with good texture and adjustable Number angle and Blinker position.
Bullet Terminal processing is required because the product arrives at the Bullet Terminal.
The License Plate Light can be installed without damaging the wiring on the Both Sides of the car if the wiring on the Fender side is cut and modified.
Since there is no +− notation on the attached License Plate Light, we recommend that you work after confirming +− with Inspection Tester.
(I made a mistake after checking with Inspection Tester and connected the wrong way around and skipped Fuse.)
This is not related to the product, but OEM Fenders are tightened very strongly, so it is recommended to prepare a sturdy tool that is easy to apply force to make the work smoother.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
GOOD Design
I think it is GOOD Design.
Regarding installation, note that the OEM parts are used, although it may not be mentioned in the Instruction Manual.
Installation is recommended to prevent the possibility of falling while driving.
View detail
Fits well with Normal tail. Each part is carefully made, no rattling at all.
Even the Blinker's appearance was adjustable, and the appearance of Balance and quality was very high ^_^. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
I broke...
I broke it just riding around with it on like normal. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
I don't think you should buy it.
When I first put it on, I thought it would be cool to have more gold in the suspension, but about 2 and a half months after I put it on, it broke off from the head of Screw while driving and I thought I lost one of the Cap and I lost money!
I think it's not a good idea for a product to be damaged in a short period of time when it's not something you would normally use or move around.
I've made up my mind never to buy SNIPER products again.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
make my bike more beautiful
this frame hole cap doesn't have special effect on your bike. but it make your bike more beatiful. it is not hard to install but be careful as i scratched the cap a little bit. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
good
The large hole at the opening of the Wiring hole from the outside was filled with Cemedine Pate.
As for the wiring of Number etc., I cut the wiring of the OEM License Lamp of the Fender side in the middle, processed it to the Bullet terminal terminal, connected it to the Coupler wiring of the Fender side, and connected it to the Coupler wiring of the car Both Sides as it is. I connected it to the CouplerWiring of the car Both Sides.
The PlusPoint is the ability to adjust the Number angle and Blinker overhang width.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
The angle of the License Plate and the overhang width of the Blinker are adjustable.
It is good that the angle of the License Plate and the overhang width of the Blinker can be adjusted.
It's aluminum, so it's very lightweight, but you may need to pay attention to the strength.
Because the Wiring of the License Plate Light has become Coupler, the Fender side CouplerWiring of the OEM License Lamp is cut on the way, and it processes it into the Bullet Type Terminal, and it connects it with LED of SNIPER. Connected with SNIPER's LED. And I connected it to the Coupler of the car Both Sides. (The hassle of this process made it Minus1 for ease of installation)
I also used Cemedine Pate to fill the large openings in the wiring holes.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
The angle of the License Plate and the overhang width of the Blinker are adjustable.
It is good that the angle of the License Plate and the overhang width of the Blinker can be adjusted.
It's aluminum, so it's very lightweight, but you may need to pay attention to the strength.
Because the Wiring of the License Plate Light has become Coupler, the Fender side CouplerWiring of the OEM License Lamp is cut on the way, and it processes it into the Bullet Type Terminal, and it connects it with LED of SNIPER. Connected with SNIPER's LED. And I connected it to the Coupler of the car Both Sides. (The hassle of this process made it Minus1 for ease of installation)
I also used Cemedine Pate to fill the large openings in the wiring holes.
I was so focused on the installation that I didn't take any pictures, so I'll upload them later.
View detail