Reviews
Fits: DUCATI 899Panigale, DUCATI 1199 Superleggera, DUCATI 1199Panigale S/Tricolore, DUCATI 1199Panigale, DUCATI 1199Panigale R, DUCATI MONSTER1100EVO, DUCATI MONSTER 1200R
Custom in Red color Bartz
Black color body in Custom with Red color verts.
Since the Barts are only four Smallish Anodized Screws from Windshield, they don't look much different.
Naturally, there is no change in driving.
It was an investment for complete self-satisfaction, but even a small investment like this will make a difference as it accumulates.
View detail
Used for Demon150GR
[How is it used?
Demon150GRFrame Hole Cap, used as.
Was the one you received as per Image?
I have seen Frame Hole Cap replacement often in Thailand, the home of Demon150GRCustom, but I don't know which one is available,
Once again, we sought out Universal Product and took on a human-pillar challenge!
First of all, it was important to know if it would arrive or not, so I measured the size at Caliper and bought one to try it out.
I found it to be usable and ordered more for the other side, but was disappointed to find that the inside of the Wrench hole in the second item I ordered was rusted.
I gave up on returning and exchanging the product because I had to wait several months after ordering, but if the rust continues to appear, I will look for a separate Screw only.
The texture of the aluminum cut-out part is high, and the design is simple and nice.
"MADE IN ITALY" notation increases Tension.
Was the installation difficult?
The OEMPlastic cover of the Demon150GR is only held in place by tabs, so it can be easily removed by pulling it off and replacing it.
Type of size adjustment by tightening the screw, which collapses the rubber.
Can be mounted with Bolt On.
How was your experience with it?
Compared to the OEM Product, I like the increased sense of quality.
Anodized Black has a duller shine than OEM Product's chunky resin caps, which is exactly what we were aiming for.
This product is available in a number of Sizes, so if you can find one that is circular and fits the Size, it is worth a try.
I am using another Size of Gold for CYGNUS-X as well.
[Included Parts:were they on?
The product is only in the blister pack, there are no design documents etc.Included Parts:.
[Was there anything that disappointed you?
It is Rust in Screw. Other than that, it's perfect.
If I had to say so, I would say that it is difficult to change the bolt color because the screws are silver Hexagon Socket Countersunk Head Screws.
If possible, Bolt is also someone who would like to change colors.
View detail
Dress-up of Monster937
The Monster 937 has a lot of plastic covers around the engine, so I bought this to dress-up the look a little.
The texture is good, but I think it would stand out a little more if the Carbon weave were larger (it's a rather fine weave).
Since these parts have nothing to do with performance or usability, the more conspicuous they are, the better.
Installation is easy. Simply peel off the cushioning material (sponge) from the removed Cover, attach it to Carbon's Cover using double-sided tape, and fasten it with three screws.
However, the position of the screw hole is fine, but the screw hole is a little distorted, and the screw could not be inserted unless the hole is widened with a file.
I don't think it is a Large problem because it is only a very small one.
You don't notice how it looks unless you are told? I think it's about the same.
It seems a little expensive for what it is.
Well, it's a world of self-indulgence.
View detail
Fits: DUCATI SUPERBIKE 1299 Panigale, DUCATI SUPERBIKE 1199 Superleggera, DUCATI SUPERBIKE 1199 Panigale S, DUCATI SUPERBIKE 1199 Panigale R, DUCATI SUPERBIKE 1199 Panigale, DUCATI SUPERBIKE 899 Panigale, DUCATI SUPERBIKE 1299 Panigale S, DUCATI SUPERBIKE 959 Panigale
The so-called StickerTune
[How is it used?
City Riding ~Touring
Was the installation difficult?
It is difficult to get a good center, but it is easy to apply.
How was your experience with it?
Italy colors look good on Panigale.
I didn't find anything special in terms of performance or functionality.
It is better to separate it from StickerTune.
[Included Parts:were they on?
No, only Tank Pad. You must provide your own means of degreasing.
[Was there anything that disappointed you?
As in the other Review, if you look close up, there are air bubbles in it.
I feel that it is peLePera overall, and the thickness is not even etc. (not to the extent that it bothers me). (Not to the extent that it bothers me.)
View detail
THESimple
It's not bad.
I think the Ducati Performance is better looking design-wise...
Pricey!
Once installed, it is simple and comfortable, but a little sad.
It is good for those who like simplicity.
View detail
Fits: DUCATI SUPERBIKE Panigale V4 S, DUCATI SUPERBIKE Panigale V4 R, DUCATI SUPERBIKE Panigale V4, DUCATI SUPERBIKE 955 Panigale V2, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S
Different quality from JAPAN
It looks cool at a quick glance, but the surface is full of bubbles (bubbles or Garbage?) and the quality is quite poor. View detail
Fits: MV AGUSTA STRADALE 800, MV AGUSTA TURISMO VELOCE 800, DUCATI MONSTER1100/S, DUCATI MONSTER1000, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER S2R1000, DUCATI MONSTER 797, DUCATI HYPERMOTARD1100EVO, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD1100EVO SP, DUCATI HYPERMOTARD1100/S, DUCATI DESMOSEDICI RR, DUCATI SS1000, DUCATI PAUL SMART1000LE, DUCATI Multistrada 620, DUCATI Multistrada 1100/S, DUCATI MONSTER900, DUCATI MONSTER800, DUCATI MONSTER796, DUCATI MONSTER750
Small parts, but they make the legs look tighter.
[How is it used?
Replacement will be made from NORMAL.
Was the one you received as per Image?
The Aluminum Cut-out and Anodized finishes are moderately good.
Was the installation difficult?
The installation is easy, although I had trouble with the need for a 28? socket or Spanner.
How was your experience with it?
The product is only for appearance but improves the texture.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
The price is a little high.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Tank pad
First, the delivery time are acceptable since I have purchased other product which is not in stock. The packing was good as usual. The tank pad is very nice product and it's easy to install. Overall, I 'm very satisfied the services and will come back here for purchasing View detail
Fits: DUCATI 1098R, DUCATI 1098, DUCATI 1098, DUCATI MONSTER 1200, DUCATI DIAVEL, DUCATI DIAVEL, DUCATI STREETFIGHTER, DUCATI 1299Panigale, DUCATI 1199Panigale, DUCATI 1299 Panigale S, DUCATI 1098S, DUCATI 1098S, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1199Panigale, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI MONSTER 1200S, DUCATI MONSTER 1200R
Repurchased.
I repurchased the Nut to replace it along with the Sprocket and Chain exchange.
Material:Since it is Aluminum, I decided to replace it because I knew it would get scratched when replacing the Sprocket. It had faded and I think it was just the right choice.
I think I will replace the Nut in the future when I replace the Sprocket, so I rate the cosmetics as low.
It would be good for a small dress-up of the footwear.
View detail
Fits: DUCATI 1098S, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1098, DUCATI 1098R, DUCATI 1098, DUCATI XDiavel, DUCATI XDiavel, DUCATI STREETFIGHTER, DUCATI STREETFIGHTER S, DUCATI Multistrada 950, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200, DUCATI Multistrada 1200S Granturismo, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200 Enduro
A little dress-up
The rear sprocket, flange, and flange cover had been replaced with CNCRACING ones, but the flange nut was OEM, so the flange nut was replaced as well.
The work was done by a Dealer because I don't have many tools, etc.
Since it is a Flange nut, there is no need to change it unless the Flange is replaced.:Aluminum, so it should be replaced at the time of replacement.
Other products from CNCRACING with Red Anodized paint do not fade mysteriously, but this Nut has been in use for about 6 months and I think it is fading.
It is good for a little dress-up.
View detail
Fits: DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4
PetitCustom
I think I'll go with PetitCustom and keep it casual. View detail
Fits: DUCATI HYPERMOTARD1100EVO, DUCATI HYPERMOTARD796, DUCATI Multistrada 1000 2003-06, DUCATI Multistrada 1100/S, DUCATI Multistrada 620, DUCATI HYPERMOTARD1100EVO SP, DUCATI HYPERMOTARD1100/S
Don't buy it.
It does not fit the MULTISTRADA 1100. View detail
Fits: DUCATI MULTISTRADA V4, DUCATI MULTISTRADA V4 S, DUCATI MULTISTRADA V4 Rally, DUCATI MULTISTRADA V4 Pikes Peak
Tank Pad
I think it looks good. However, I am concerned that if the flag is visible, it will be seen from the part of the tank where the shape of the tank changes. I'm worried that it may fall off. View detail
Fits: DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S
The assertive Wing has been Refreshingly improved. It is a personal opinion.
The price is high, but it fits well and looks neat, and I am personally satisfied. View detail
The printing is cool!
Purchased for Dress-up.
I considered a lot of SprocketNut, but I decided to go with this one and another one for texture and Coloring.
I bought two of them because DUCATI is Red and Gold.
There's nothing special about the performance, but it's made of Aluminum Alloy, so it's lighter than the OEM Steel, yes.
I think the CNC and the print of MADE IN ITALY are very cool even if it is such a small nut.
View detail
Fits: DUCATI HYPERMOTARD939, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD1100EVO, DUCATI HYPERMOTARD1100/S, DUCATI HYPERMOTARD1100EVO SP, DUCATI STREETFIGHTER848, DUCATI Multistrada 1100/S, DUCATI MONSTER796, DUCATI MONSTER1100EVO, DUCATI MONSTER1100/S, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER S4R, DUCATI MONSTER S2R1000, DUCATI SBK 916 1994-99, DUCATI Multistrada 1000 2003-06, DUCATI MONSTER S2R, DUCATI HYPERSTRADA, DUCATI HYPERSTRADA, DUCATI HYPERMOTARD939
It is carefully made and Beauty!
I replaced the wheel nut when I replaced the Sprocket nut.
The 848 is Black because it is a Black Wheel.
It's a FashionParts, so it's not about the performance, but it's CNCRACING, so the quality is high and it matches the motorcycle very well.
It's made of Aluminum Alloy, so it's light.
One Side as well as Both Sides Nut is Quantity:It is good because it is Set so there is no mistake.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA XJ6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA MT-09, YAMAHA MT-01, YAMAHA MT-07, YAMAHA FZ1, YAMAHA FZ6-N, YAMAHA FZ8, MV AGUSTA F4-750, MV AGUSTA F4 1000R, MV AGUSTA BRUTALE R989, MV AGUSTA BRUTALE1078RR, MV AGUSTA BRUTALE 910S, MV AGUSTA BRUTALE 750S, MV AGUSTA BRUTALE 910R, DUCATI SS900
Tank cap replacement
This is a part that is becoming a standard part of my dress-up menu.
At the time of V4S, there was no problem, but this time, the enclosed aluminum spacer
It was necessary to process to shave a little bit of
If anyone is replacing the tank cap on the M1200S
In advance to prepare the aluminum spacer of height 15mm and hole diameter 6Φ.
Recommendation
View detail
Fits: MV AGUSTA F4 1000 RR, MV AGUSTA F4 1000 RC, MV AGUSTA F4 1000 R, MV AGUSTA F4 1000, DUCATI SUPERSPORT 936 S, DUCATI SUPERSPORT 936, DUCATI SUPERBIKE Panigale V4 S, DUCATI SUPERBIKE Panigale V4 R, DUCATI SUPERBIKE Panigale V4, DUCATI SUPERBIKE 959 Panigale, DUCATI SUPERBIKE 955 Panigale V2, DUCATI SUPERBIKE 899 Panigale, DUCATI SUPERBIKE 1299 Panigale S, DUCATI SUPERBIKE 1299 Panigale, DUCATI SUPERBIKE 1199 Superleggera, DUCATI SUPERBIKE 1199 Panigale S, DUCATI SUPERBIKE 1199 Panigale R, DUCATI MONSTER 1200 R, DUCATI MONSTER 1200, DUCATI MONSTER 1200 S
Tandem Footpeg Removal Solution
Purchased to fill the Left Side Tandem FootpegBolt hole in the Exhaust Support installation on my Duka Motorcycle.
Well, that's normal.
View detail
Fits: DUCATI SUPERSPORT 950, DUCATI SUPERSPORT 950 S, DUCATI SUPERSPORT 936, DUCATI SUPERSPORT 936 S, DUCATI MONSTER 821, DUCATI MONSTER 1200S, DUCATI MONSTER 1200R, DUCATI MONSTER 1200
It's a humble CustomPoint, but
It's a simple CustomPoint, but it makes me happy to see the difference when I'm driving.
Also, when you change the dirty Bolt, the body itself looks cleaner.
View detail
Fits: MV AGUSTA TURISMO VELOCE 800, MV AGUSTA STRADALE 800, MV AGUSTA RIVALE800, MV AGUSTA F4-750, MV AGUSTA F4 RC, MV AGUSTA F4 1000S, MV AGUSTA F4 1000R, MV AGUSTA F4 1000R, MV AGUSTA F4 1000R, MV AGUSTA F3 800, MV AGUSTA DRAGSTER 800, MV AGUSTA DRAGSTER 800RR, MV AGUSTA BRUTALE990R, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE920E, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE675, MV AGUSTA BRUTALE1090RR, MV AGUSTA BRUTALE1090RR, MV AGUSTA BRUTALE1090R
It's a component that's important to look at.
It seems that the female screw of the pure STD Nut and the male screw of the Shaft were chewing on the replacement of the Tire, and it was not easy to remove it.
After removing it, the threads were ruined, so I replaced them with CNCNut.
View detail