Reviews
Virago
Nice windshield! It was hard to find it but webike had) Fine quality, installation took some time and efforts... used a hole pincher to make holes in apron. View detail
Very nice quality. Installed on my z550a3
Shipping was fast and the product arrived in perfect condition. It was pretty easy to install. I bent the screen by submerging it in hot water very slowly. I also bent the iron supports to get the tilt I wanted. View detail
Asahi wind shiled
Have lots of brands out there for wind shield of Honda Monkey125(jb03) But definately this brand looks fancy, great and qualitywise it's perfect This model was not made for Honda konkey125 but it fits View detail
Fits: HONDA HORNET250, HONDA HORNET250 [Hornet]., HONDA HORNET250 [Hornet].
Mounting on HORNET 250
Installed on HORNET250.
Simple modification due to partial interference with the exhaust system and radiator hose. (Scraping) is needed. materially sanded, it is over in an instant.
If you have the Rear Stand, you can install it without removing the Side Stand. It is a little bit uneven, so if you are concerned about it, you need to paint it as it is.
It is ideal for immeChain around the scanty Under
View detail
![[Product Of Z-Father] Pink Windshield White Cloth/White Edge](https://img.webike-cdn.net/catalogue/18969/001013000047_TS.jpg)
ACP w800 Pink Windscreen
ACP w800 Pink Windscreen The delivery arrived in a week. It's an overseas delivery, but it's fast It is equipped with a cool color screen suitable for summer, and I am quite satisfied. I think it's the right combination of the color of the sheet and the body. Personally, I think it's a satisfactory customization. Thank you. View detail
good thing
Fast delivery and very satisfied. The design is excellent and the motorcycle is decorated beautifully. Thank you seller for a good product View detail
![[Product of Z-Father] Purple Windshield Black Cloth / Black Edge](https://img.webike-cdn.net/catalogue/18969/001013000046_TS.jpg)
ACP Purple Windshield Black Cloth.
I'm satisfied because the delivery arrived in 5 days. I wanted a different color shield, but I am satisfied because it is so pretty after wearing it. I'm happy to experience ACP's shield and I'm going to buy various colors soon. Thank you. View detail
![[Product of Techincal Service Honda] Tandem Bar with Plating Rubber](https://img.webike-cdn.net/catalogue/18969/003002000011_TS.jpg)
Fits: YAMAHA XJ400 E, YAMAHA XJ400 D, YAMAHA XJ400 E, YAMAHA XJ400 D
ACP with RubberPillion Bar
I had an OEM Product Pillion Bar on it!
I exchanged it for ACP's with RubberPillion Bar.
It's thick, burly, and changes the look quite a bit!
Recommendation!
View detail
Fits: YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
OEMCowl is too expensive for APCCowl.
It is affordable and I bought it anyway. It doesn't look sturdy, but the price is right and I personally bought it to try it out and put it on, so I'm satisfied so far. I think it would be good to have Impact so that I can measure the holes properly and drill them cleanly.
I drilled the holes in the same location as the OEMCowl. It is easy to find the image search.
View detail
Hmmm…Is this a PRO job, or what?
First thing out of the box … cesspools everywhere.
Well, it can't be helped. I found an unnatural Leutor's mark while thinking about it.
When you look through it to the light…
You're repairing the crack, right?
I bought it new!!!!
So please be very prepared to buy it.
View detail
Asahi discoloration screen
I recommend it.
It goes well with a very vintage look.
Shipping was very carefully packaged and took a week to reach Korea.
Because it is universal. I think the light would go well with a round bike.
It is a little more expensive, but I recommend this color rather than clear. ------------------------------------------------------------ -------- I recommend it.
Vintage well.
Delivery was very careful and took a week to Korea.
Because it is universal. The light seems to be cool to the roundbike.
The price is a little more expensive, but it recommends this color rather than clear.
View detail
Honda Jade 250
2 question.. why??? And who want see this part on her Bike it does not even come close to the appearance of the original part.it is as if half is missing. I thought it was similar to the original at least 20cm longer than needed View detail
Fits: KAWASAKI KZ1000, KAWASAKI KZ900, KAWASAKI KZ1000, KAWASAKI KZ900
Great design fuel tank stickers
It’s almost the same as the picture in the picture, but the only problem is (see picture). Because this sticker has a large area, it must be folded when expressing it. It may have been folded for a long time, so the bent part There is a phenomenon of separation between the sticker and the bottom. Because it has not been posted yet, I am not sure whether this will affect future use. I suggest that the supplier can roll up this sticker for transportation without creases, which may solve this problem. ---------------------------------------------- And the picture looks almost no difference, but the only problem areas are (see picture), this sticker because a large area, so the delivery time must be folded up, it may be folded a long time, so the bent section there have been isolated phenomenon stickers and below. Because no stick, so I'm currently not sure this will not affect the future use, I suggest that suppliers can put this sticker roll up transportation, do not crease, you may be able to solve this problem. Powered by Google Translator View detail
cheap and inexpensive goods
After a month and a half of postponement of the order, the arrival date was postponed two or three times, and it took a month and a half for the product to arrive, but the Cowl was a Pe LePera, and when I tried to paint it, the wind almost blew it off. I don't want to get upset or make a fuss over a little thing, as I've been tinkering with any car model, but I can only assume that they're licking their customers too hard. View detail
![[Product Of Z-Father] Blue Windshield](https://img.webike-cdn.net/catalogue/18969/001013000044_TS.jpg)
Fubo / Windshield
Windshield, does what it was made to do and looks cool doing it. Installation was easy and straight forward, Doesn't come with directions. View detail
Fits: SUZUKI BANDIT250 GJ74A, SUZUKI BANDIT250 [Bandit] GJ74A, SUZUKI BANDIT250 [Bandit] GJ74A
For a low and wilde style!
It is White Gel Finishing and must be painted
Spray and Urethane in Primer surfacer and Black metallic [Color] I painted it in Clear
After installing the Bracket, bolt the Under CowlBody to the Bracket It is completed
The space underneath the Engine fills up and it looks low and Wilde!
It went well with the Bikini cowl I was wearing earlier, and it was a great style
View detail
![[Product Of Z-Father] Cherry Windshield](https://global.webike-cdn.net/images/reviews/627/00001005627L.jpg)
ACP CHERRY WINDSHIELD
This is a great quality windshield from ACP, It looks very well made and was easy to install, The worded instructions are in Japanese but don't let this put you off as there is a superb diagram showing how it fits and includes a clear parts list Thank You Web!ke for good service View detail
I'm glad I bought it.
APE's Z Spec that I bought in second hand. I am on board. Because the position of Tail cowl and Tail lamp did not match until now, Cowl was held with Tying Band, but it was possible to install it exactly with this product.
However, depending on the shape of Tail cowl it may not work as it is written in other impres,
View detail
Cospar good
Making is somewhat rough, but it is a good product when considered from the price
In fact there was no Red Reflector with an outer diameter of 60 cm and even if I ordered from the Parts List of GS 1000 S, I gave up because the Yellow color arrived but I found it by chance and immediately bought it
Yahoo! Auction etc. But occasionally I sell Red Reflector but I do not have Size or much less much for GS 1000 S
Those who adhere to OEM I think that it is better to avoid those who stick to quality
I think that there are many people who want to turn it to other parts rather than expensive gold to say so privately But it seems to be a good part for anyone who says so
Personally I'm satisfied with Large
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
It looks nice
I think that this product looks good as well as make and weight feeling is good. Installation is easy and OEM is 3 Screws, but this part is ScrewQuantity : It is 2 pc stop. I thought that it would have been better if the back was slightly lower if there was one dissatisfaction. View detail