Reviews
Excellent
They are made from composite material and lighter than the stock ones Thinner and more elegance, especially with sr400 gas tank. You need to remove air box and to relocate all electric parts from left side. View detail
I bought it for outside for Seat.
I bought an external Seat, but the Bracket was ported from OEM, so I bought it. It takes a little bit of force to lock the Seat, but it is acceptable. View detail
Seat Quantity:2pc. Ideal for Set holders
I bought it because I could not purchase the Bracket alone with OEM Parts.
It is helpful to change the Seat when the mood strikes.
View detail
it works
This lock has a liltle bit different design, than the OEM, but works well. Mount holes and locking mechanism are the same. View detail
I haven't used it yet, but it looks like it will fit TOWN perfectly.
I haven't used it yet, I'm going to write about it after I use it, but I keep getting emails asking me to write Impressions. View detail
Fits: SUZUKI GRASS TRACKER GRASS TRACKER, SUZUKI GRASS TRACKER BIGBOY GRASS TRACKER BIGBOY
Design is perfect
I replaced the OEM heavy Fender with this one to kill time on the Corona. At first I was going to use a NORMAL iron fender with a sander, but I thought that the iron fender might have played a part in the rigidity of the front suspension of the motorcycle, so I bought this FRPMaterial. The result is Large satisfaction, FRPMaterial is more rigid than steel, the design is perfect and Dirt trackImage. I will ride with Gel finish Black for the time being. View detail
Up Fender essentials
I used it on my commuter car, XG250 TRICKER, and when I put the Male car Up Fender on it, I got my pants and boots soaked when I commute on rainy days, so I found this and bought it right away.
These are good items that hold down the splash just like a normal fender and do not sacrifice the looks and performance of the Up Fender!
View detail
The one and only, unprocessed and perfect Up Fender
I used it for my commuter and Motocross car, the XG250 TRICKER?
It's a pimped-out version and looks classic and fits the XG250 TRICKER.
View detail
Fits: SUZUKI GRASS TRACKER GRASS TRACKER, SUZUKI GRASS TRACKER BIGBOY GRASS TRACKER BIGBOY
It was Large sturdy even without painting.
It is a very beautiful Gel coat and I installed it as it was. It's a shame that there are 8 washers in it and I had to adjust the width of the washer between two washers in one place. Quantity of the thicker colors:I wanted to include 1pc. each. The rest looks great and I have nothing to complain about. View detail
good-looking
The OEM Chain Guard is difficult to polish, which led me to purchase this product.
Space is now available as I had hoped, making it easier for Chain to polish.
I'm also glad I bought it because the dirt was noticeable in the silver, and it looks and feels much better now.
View detail
Reliability of OEM Parts etc.
The DAYTONA COZYSeat didn't come with a bracket for securing the car body, so I bought it.
Installation is very easy
The seat is securely fastened to the body of the car with this bracket and there is no wobble while driving.
It has been 4 years since I used it.
The leather of the seat was reupholstered after three years, but this Bracket can be used without any deterioration such as Rust.
View detail
good.
It was installed on a 15 year old w800 black edition. I am satisfied because it is light and the length is suitable as it is made of Frp material. There was no big difficulty in mounting as there was a bolt hole in the same position as the original one. However, it is brand new and has some minor scratches, so I am giving it 4 stars Equipped with a 15-year w800 black edition. Frp material is light and suitable for length. There was no big difficulty in mounting as there was a bolt hole in the same position as the genuine one. However, it is a new product, but a product with a small kiss comes and gives 4 stars. translated by google translate View detail
Fits the TU250 perfectly
Impressed with the great quality of this mudguard; fits the TU250 perfectly and a real improvement on the stock for a much more refined look. View detail
If it was just a little cheaper..
These parts are not for performance, but to change the appearance of the CROSS CUB However, when you install this Beak Cowl, it looks like a V-STROM! to change This is why I am looked at twice by other motorcyclists Yes! View detail
Large satisfied
To On road from VINTAGEOFF
It was the same as Image
It was well made and safe to use
But wouldn't it be nice to be a little less expensive? I thought
The attached mounting screw is the Material:I wish it had been Stainless Steel
Later, the OEM mounting Screw was 8mm head hexagon, but it was 10mm head I wish I had been able to match that
But I'm happy with Total ^ - ^
View detail
A great substitute for the stock fender
It looks really good, as it is shorter and more compact. The quality of the material used is sturdy and firm. The paint blends well with the stock black color of my W800 View detail
Perfect fit for W800.
As my title describes it, I'm not sure if it's the same as the OEM one but it looks and performs exactly the same. The only thing that I have to subtract one star from my review is the lock nuts are not included, so hopefully you have ones at home or you will need to remove from the old seat, or go buy at a hardware store. I really hope they include 2 lock nuts which would cost less than a dollar since the price is not that cheap anyway, they could have included them. View detail
Oscar goodness
As good as the short rear fender. Great fit, great value. Looks so much cleaner than the original front fender. But you have to live with lot more water on you when it rains. Exactly what I wanted! View detail
Good old Oscar
Oscar plastics are usually first grade after market parts. As this little fender shows again. Looks very sexy on my beloved bike! Good value for money! View detail
The fender clears the stock Battlax tire on the new SR400 by a couple of centimeters. The width of the fender at the mounting holes is a little narrow though. But since it is fiberglass, it had enough flex/give to allow me to mount it to the forks. I'm no
The fender clears the stock Battlax tire on the new SR400 by a couple of centimeters. The width of the fender at the mounting holes is a little narrow though. But since it is fiberglass, it had enough flex/give to allow me to mount it to the forks. I'm not sure if I'm stressing the fiberglass and whether that will reduce the lifespan of the fender. I hope it doesn't crack! View detail