Reviews
![[WALLESS] Aluminum License Plate Base Plate](https://img.webike-cdn.net/catalogue/images/59796/wls-001_01_TS.jpg)
Effective for License Plate resonance countermeasures
I was going to have the License Plate of VANVAN200 reissued because the crack started from the edge of the Mounting Bolt seat and the crack has been growing since then. I decided to purchase this product as reinforcement. 。
View detail
Good quality gas cap
This gas cap is very nice, it feels and looks like a good quality product. It fit well on my custom Kawasaki Vulcan 800. I'm using a 1985 - 2003 harley sportster tank View detail
It also arrives in a keycap with key.
I used it on a Harley keyed Cap. It installed perfectly. Considering shipping costs, webike is the cheapest place to buy a Replace item. View detail
For those who want to casually prevent License Plate cracks.
Purchased for W800 License Plate vibration control.
The thick aluminum plate is effective in preventing cracking of the Number without resonance.
Since it is the same size as the License Plate, it does not protrude from the License Plate when installed, and is recommended for those who do not want to look like they are installing a frame.
When looking at the License Plate from the Rear Fender side, the reverse side of the License Plate can be seen, which can be covered by the Plate.
View detail
For FRP Tank production.
I bought this for my One-off FRP Tank creation.
It is a domestic (Honda) standard and is the same as the old SUPER CUB, CD50/90 and XL250 series.
So it is compatible with Cap.
Until 20 years ago, there was only weld mouth Gold for HARLEY, but now there is such a mouth Gold for Japan car standard
It was a good time (I didn't have the mouth Gold I wanted back then, so I made my own with Cut-out).
For Welding's mouth gold, there is no gluing allowance when attaching it to the FRP tank, so a strip is cut out from a thin steel plate.
I annealed it, bent it around to make a Doughnut shape, and attached it to the mouth gold with Silver Low to make a flange that can be used as glue.
VinylEster resin is mixed with Fiber and Barrelk to make a glue and fixed, and finally reinforced with Glass mat.
If you use VinylEster resin, it won't leak no matter how many years you use it, but don't use Polyester resin.
The product itself is well made, but it is not as good as it is supposed to be. "When welding to iron tank has no ears.
It's tough unless you're TIG welding, and if you're using non-gas semi-automatic you have to do it from the back. Har of rubbing together.
The dollar is going up, but I'm not sure if I should stick with Silver low.
Cap also works normally. However, the air vent is poor, so it may leak when you put it in a full Tan.
If you want to make your own tank with FRP or thin aluminum, you can either buy a cap of the type to attach the tube, or you can use a cap of the type to attach the tube.
It is advisable to provide a separate air vent at the time of construction.
And it's a large thing, but the finish of the part where the packing of the mouth Gold and Cap hits is messy.
There is a Case which leaks slowly. This is a case that is leaked slowly with Paper No.1000→2000 after Tank is completed.
If you sharpen it and polish it a little, it will fit.
Just like that. There is some difficulty, but it is the most convenient Items for the person who makes Tank by oneself.
View detail
In a week.
It warped within a week of use. Is it just Rubber, not Gasoline resistant? I'd rather buy per Jims. View detail
It's useful enough
I bought it for maintenance
The gas cap is periodically replaced because it is frequently opened and closed, but the OEM Product is expensive
This one is inexpensive enough for me to use
Of course, there are no gasoline leaks
View detail
Rusted Tank
I received this tank and found that many rusty parts on this tank. The shape of this tank is really similar to the old sportier tank. View detail
Bent (Air hole) It is attached!
On exiting while changing from outside to Tank (Especially slope) I was bothered by Gas deficiency symptoms. Secondary Air leak check, Under-seat engine hall, Fuel line check, I tried various things, but the symptoms were not improved - - - Ultimately it turns out that Gasoline does not come down Gas cap is non-Bent (Without air without Hole) Noticing, this Bent (With air hole) I bought. I was worried about compatibility with outside Tank, but basically it seems that if it is Gas cap of UniversalCamType. After all, my external purchase was due to the absence of air holes on Cap side and Tank Cap Support side. Symptoms were improved after exchanging! It was really nice to buy! View detail
Fits: HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily
Well it's like this.
Attached to FLSTC HERITAGE SOFTAIL CLASSIC 2005.
It's cheap so I can not say fine things, but I say that it's hard to turn, but it's hard to hold, so it's a little difficult to turn.
It is unknown whether the Bent function is working or not.
If it is a preliminary, tentative Cap, I think that it will be quite useful in terms of price.
View detail
Attached to Peanut Tank
TankCap gasket of Peanut Tank got damaged and replaced.
I think the thickness is probably 3 mm Meter.
Just fit to Tank cap wearing both inside diameter and outside diameter, even if it got Tan of Gasoline, it did not leak out.
At first I decided to create my own Gasket at Home center, but from the price side / It is also good for Gasoline resistance, so it was good to buy this product.
We recommend you to buy some extra.
View detail
Good quality.
I purchased Bent included. There was description as one month on delivery date, but arrived around 3 days, surprised.
I'm worried about where it's made, but I will be glad that it can be used normally without problems.
View detail
the expendables?
Large deformed and replaced, so I exchanged. Cap itself is not such an expensive thing, but this Gasket was also quite Reasonable saved. Rubber's quality was also good and it was of good quality. View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Others
Since the Lens used now was damaged, it purchased. I think that he gets hooked a 4.5-inch Headlight altogether.Although the thickness of the Lens became thick about 1~2 mm, to attachment, it was satisfactory.
Since the Lens used now was damaged, it purchased.
I think that he gets hooked a 4.5-inch Headlight altogether.Although the thickness of the
Lens became thick about 1~2 mm, to attachment, it was satisfactory.
View detail