Reviews
It works fine!
[How is it used?
I replaced the tank cap with a one-touch type tank cap so that I can refuel the SPIDI when refueling the NSR250etc.
Was the one you received as per Image?
Some other impressions are nowhere near as good, but the one I purchased was not bad in quality and was perfect in terms of accuracy.
Was the installation difficult?
I was able to install it with Bolt On with Bolt.
The diameter will be 115mm Tank cap.
How was your experience with it?
It is easy to attach and detach with the One-touch when refueling, but the refueling port has to be put down once, which has its advantages and disadvantages.
[Included Parts:were they on?
Packing and Material:Stainless Steel Screws are included.
[Was there anything that disappointed you?
None in particular. It seems to be a bit risky as it seems to be hit or miss.
I would like to make it common for all manufacturers. I would like to see this standardized.
View detail
Used on NSR250R Racer
It is very good and easy to key less. I think the price is lower than other companies' products.
However, fuel may leak if the vehicle body is tipped over.
Note that in Race, Cap changes may require filling the Tank with explosion-proof material.
View detail
Cheaper than purity, solid Tank cap
Since the OEM Product for NSR250R costs about 20,000 yen, we purchased this one for Circuit Running.
Gasoline does not leak and is well made. It is also good that the Tank can be opened with one hand without using a key.
View detail
It's easy not to need a key.
When I was looking for a key less tank cap, I found a cheaper one, but I was worried about the quality, so I bought this one. This is a great product. (2NX) I used it on my SRX and was able to install it with the included Hexagon Bolt and Rubber buffer. I was worried because I had seen some information on the net that the length of the bolt was not suitable for other models or that the rubber had to be modified, but the SRX was large and strong. The only thing is that if you don't store it in a garage, it might be stolen by gasoline thieves, so you might want to think about that carefully. Also, I don't know what will happen if it rains or something. View detail
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400
lock-essential
I like Parenthesis because you don't need a key to refuel! View detail
Easy to refuel
I bought this product because of NSR-MC28, and I thought the key was troublesome when refueling.
I'm satisfied because I don't have to worry about refueling.
However, since the mouth becomes narrow, it is difficult to check the amount when refueling.
Of course, since there is no key, you need to make sure that you are not pranked.
Also, the Bolt that came with it was too short, so I prepared it separately.
View detail
Fits: HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
If you like.
It is installed to NSR250R.
It's nice that it's easy to remove without a key, but I thought it was a product of different tastes.
Is the back packing vulnerable to Gasoline? Deformed and melted when removed? It was like.
View detail
Fits: HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
Are they conforming properly?
Carbon Style's Tank cap has deteriorated and comes off, so Material : I bought Cap of Aluminum.
Appearance Design ? Reasons why prices were cheaper than other companies.
It's hot when it's hot and it does not touch with bare hands.
Bundled Packing is thick, and the attached Bolt can not be installed short.
Even if I use alternative Bolt 4 M dish Bolt does not sell long legs.
Cut the Rubber board of half thickness unavoidably
My own packing.
Although I could barely install it,
Parenthesis is bad at a state where it falls dented slightly below the tank surface.
Packing too thick for our bad dish Bolt.
I can hardly imagine that we are conforming to the vehicle properly.
We do not want to sell only with the general adaptation that Universal will work if it is a conventional Exclusive HONDA Motorcycle Tank cap.
Manufacturer's correspondence is not good either.
No reply from Wei Big !!!
View detail
I'm very impressed
Ordering this I was apprehensive about the quality of this product, because it was so cheap, I had my doubts...But Boy was I wrong, The machining is very neat leaving a very smooth finish, The mechanism is very tight and smooth, coupled with a quality, vibrant anodization, I could not be happier. Very VERY nice product and I will be purchasing more in the near future. View detail
Since the pure keyhole has broken To an external Tank cap, since an exchange Yamaha has many common parts.probably it is attached -- I will come out -- 3 hole Type for an R1-Z -- purchase -- it being attached and, although attached easily.If the
Since the pure keyhole has broken To an external Tank cap, since an exchange
Yamaha has many common parts.probably it is attached -- I will come out -- 3 hole Type for an R1-Z -- purchase
-- it being attached and, although attached easily.If the Rubber packing which should come is not attached and it does not redo later again ... I think that it is a comparatively beautiful Aluminum cap of the
price. The color of
photograph for which I feel that it is hard to open until it merely gets used for a while is a Titanium color.
View detail
Attachment is easy. Removing a genuine and finished by four bolts. It is cool anyway. It may be dangerous in an unsafe area.
Attachment is easy. Removing a genuine and finished by four bolts. It is cool anyway. It may be dangerous in an unsafe area. View detail
"Since the seal rubber of the tank cap of YSR deteriorated, and it became hard and had been divided into the solidly, I thought that I would exchange for a genuine new product, but I reached this when searching for an external product. Since I do not have
"Since the seal rubber of the tank cap of YSR deteriorated, and it became hard and had been divided into the solidly, I thought that I would exchange for a genuine new product, but I reached this when searching for an external product. Since I do not have worries of a mischief or a gasoline thief, a key is unnecessary and I like the black anodized. A cap has a lock pin and the comfortableness of operation is also very good at the locking groove by a main part side. Since texture is great at a low price and it can be satisfied. Even if a seal rubber deteriorates, it seems it can be made from rubber board logging. I want to imitate such structure so that manufacturer can also substitute a general-purpose seal." View detail