Reviews
Fender Eliminator not only removes
I bought this to clean up the Fender of my 890 DUKE R. Since simply removing the Fender was not enough, I chose the well-designed Billet License Plate Holder.
Even though it is an Exclusive Design, it is a difficult structure to assemble. Above all, we had a hard time with the wiring process. The result is a satisfactory finish.
Normal muffler is going to melt Blinker soon, so I am attaching Guard separately. This is honestly kind of lame, so it needs to be considered.
View detail
Fits: KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200DAEG
Great texture!
The texture is great because it is not just a Kit with a bent board.
The mill marks on the body are cool.
People around me say that the price is cheap for this quality.
It is not suitable for Type people who want to adjust the angle of Number upward.
View detail
Satisfied with Parenthesis goodness.
The fit is great, but I had a hard time putting the cowl back on because it interfered with the LED License Plate Lamp. But once it is installed, it is perfect! View detail
Fits: KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200DAEG
The best of the best with careful finishing!
While other Fender Eliminator Kits are usually made of bent aluminum plates, this product has a very elaborate design. The price is not that different from other products, so it is a good recommendation. The installation is a little bit difficult until the normal fender is removed, and the wiring of the License Plate Light needs to be processed. If you have experience with wiring, it is easy. View detail
It's thicker and more solid than I expected.
The design is cool, it is very easy to hang the load, and it is solid.
I think it's because they appropriated the Bolt from the original Tandem Footpeg, but it's thick!
View detail
I like it a lot looks-wise.
Although the price is higher than other Fender Eliminator, the design is beautiful.
Personally, I like it a lot.
Good for bonsai w
View detail
very good
In general, the Fender Eliminator is a plain Steel, but what can I say?:I like the aluminum MachineMachine design.
However, I noticed on the way of installation, because the design is based on OEMBlinker, if you use Other Brand ProductBlinker, it will be hidden by License Plate, so Extension is required.
The wiring holes are also sealed with urethane foam because they are bare from the bottom.
View detail
Aluminum with good Design
In general, the Fender Eliminator is a plain Steel, but what can I say?:I like the aluminum MachineMachine design.
However, I noticed on the way of installation, because the design is based on OEMBlinker, if you use Other Brand ProductBlinker, it will be hidden by License Plate, so Extension is required.
The wiring holes are also sealed with urethane foam because they are bare from the bottom.
View detail
Fits: KTM 125DUKE, KTM 250DUKE, KTM 390DUKE
I'm glad I chose this product.
I had a hard time installing the Number, but other than that it was easy.
If you are familiar with it, you can install it in 30 minutes.
Since there is no part to be processed, even a beginner can install it easily.
View detail
I like the Design, so I bought it.
I bought this because I have gCraft's on my z125 pro.
It is good because it has a sense of luxury and is simple.
However, the price is very high, so I would like to see the terminals of the License Plate Light as Standard Equipment without any modification...
I don't have a Blinker Bracket because I use a Tail lamp with a built-in Blinker.
View detail
Fits: KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200DAEG
Design is cool
Design is pretty cool. I used to have a different Fender Eliminator Kit, but the Design was so cool that I replaced it.
It was somewhat difficult to install.
View detail
Fits: KTM 125DUKE, KTM 250DUKE, KTM 390DUKE
Just change it and you'll look so much more stylish!
It was easy to install with a few tools.
The Installation Manual is also available, so anyone can install it right away.
Remove Blinker once, so Quantity:Pair (for Left and Right) Be careful not to install it by mistake.
It's a little pricey, but the quality is so high that it's RECOMMENDATION!
View detail
Great build.
The texture and construction is great.
However, since there is no place to hide Wiring of Blinker and Tail, it is necessary to devise because Wiring is visible.
790duke It seems that the Blinker of the first two is in the middle of Wiring, and when it pushes into Seat in a bad way, it seems to break at the base of the board, so it is necessary to be careful.
View detail
I've found a shape I like!
New Model Katana also released Fender Eliminator Kit from each company and But I had to give up because I couldn't find anything like this, but in Cut-out I fell in love at first sight with GILD design's products, which have a certain look and Black Anodized look I did
The Instruction Manual is strict and simple for Beginner, but it comes with If you are an experienced person, it is enough for one to two hours including temporary assembly I think it can be installed
OEM Blinker Fenders Wiring for License Plate Light I struggled with pulling it inside, but it's a good finish
Whether the Blinker mounting holes are slightly Tight or Screw hole Gap on one side I was reluctant to do so, but I think there are individual differences
View detail
Sort of …
The product itself is better than I imagined Parenthesis! It looks great!
But during the installation, I realized how to install the License Plate Light
You can't just use OEM parts to attach them
To begin with, the threaded threads are not large enough or long enough to fit in the Construction Manual It doesn't say anything about the
Wiring in the License Plate Light section afterwards, why isn't it bipolar?
It's a little disappointing in many ways because it looks good
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZFR25, YAMAHA YZF-R3, YAMAHA YZFR25
I thought I was a Smartphone Case Manufacturer, but this is a good one
Just bent boards It's not a cheap thing to do
It's made one part at a time Such as
It's pretty solidly built
However, since there are so many parts, the goal is to save weight
It may not be very effective
View detail
The texture is good, but …
The texture is better than the other Kit because it is Aluminum Cut-out, but the connection is Electro The word "Tap" is no good
Modern motorcycles are just a mass of electric controls, but the Electro Tap I'm too scared to connect with an OEM connector I prepared and connected the OEM's Connector separately
The rest of the blinker is going to kick up with my feet because it comes out more sideways than the OEM & hellip; I made my own mounting section for the Blinker's position and reattached it
View detail