Reviews
It's a great product.
It's a great product.
It is very easy to assemble, and it is sturdy enough that there is no risk of it falling off and being lost while driving.
The design is much better than other products, so it goes very naturally with existing car body parts.
I was worried after ordering, but I am very satisfied. ----------------------------------------- ----------------- It's a great product. It is very easy to assemble, and it is sturdy enough that there is no fear of it falling off and being lost while driving. The design is much better than other products, so it goes very naturally with existing car body parts. I was worried after ordering, but I am very satisfied. Powered by Google Translator
View detail
Fits: BMW R1200GS LC Water Cooling, BMW R1250GS Adventure, BMW R1250GS, BMW R1250GS Adventure, BMW R1250GS
?-? Cleaning is easy.?-?
The GS Headlight is a foldable, easy-to-clean headlight. View detail
Fits: HARLEY-DAVIDSON Pan America 1250, HARLEY-DAVIDSON Pan America 1250 Special
Bare Nut Blindfold Cap
Just push it in and fit it in. It will look good. View detail
With Wonderlich, it doesn't hit Under spoiler.
There are two Front Extender Fenders for R1250RT, this Wonderlich and P&A Internationa's, but I can't use P&A Internationa's because it hits the Under spoiler when I cut the Handlebar! I'm not sure if that's what you mean. Well, there is a note of caution. Some vehicles hit the under spoiler." It says so, so maybe some of them don't hit the mark, but mine did.
I bought the Wonderlic one because it has a clearance with the under spoiler, so I can use it with no worry, even if I cut the handlebar. The width is also wider than the P&A Internationa, so the protection to the EngineFront cover is even stronger.
It is not good for mental health to lose parts that cost close to 10,000 yen.
View detail
Fits: BMW RnineT, BMW RnineT Pure, BMW RnineT, BMW RnineT /5, BMW RnineT Racer, BMW RnineT Scrambler, BMW RnineT Urban G/S
It's just too expensive.
Color of RnineT:Purchased to replace Unpainted Pearskin Resin Section Parts sequentially.
I actually bought a similar Chinese Ver from Amazon before this.
The forceful way of fixing the resin parts with wooden screws discouraged me from using it.
I knew it would be expensive, but I chose the Wonderlich product, and I think it was the right choice.
First of all, the Screw that comes with the Wonderlic is Torque, as is the case with other parts made by Wonderlic.
Since there is no Hex in the Bolts used by OEMs, it is important to unify these Bolts.
Installation is also simple, with a part sandwich, part pipe clamp, and part double-sided tape installation method.
Fitting is good.
The price is high, but there is nothing I can do about it because I can't buy it too cheaply even if I try to import it myself, so I have to give up.
View detail
Fits: HARLEY-DAVIDSON Pan America 1250, HARLEY-DAVIDSON Pan America 1250 Special
Easy installation
Installation is super easy, just snap it on from the front of the Monitor.
The effect is to block direct sunlight, making it easier to see the Meter.
View detail
Fits: BMW R1200R LC, BMW R1200RS LC, BMW R1250R, BMW R1250RS
Cap.
This is a Cap that fills the Service hole.
There is nothing particularly difficult about it, just push it in by hand.
1Quantity in total for Left6Right6:2pc. Just fill in the Set.
The effectiveness of the stain prevention is still unknown since it has only just been installed.
One part of the Radiator is mounted on the back side of the Radiator, so it can be installed where the Large body size fits without looking at the instruction manual, although it is not shown in the photo.
View detail
Fits: BMW R1200GS LC Adventure water-cooled, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1250GS, BMW R1250GS Adventure
The quality of construction is as good as it gets.
Expensive, but understandable.
I bought it because I couldn't forget that windless condition to change from K1600GT.
Of course, it is not completely windless like in GT, but a moderate breeze passes through.
At the lowest position, the Screen is a little below eye level, but it does not bother me that much.
If you raise it, you will be looking forward completely through the Screen.
It is so quiet that TireNoise is a concern.
Even in the rain, the arms get wet, but the shoulder area covers well.
Screen is not blurred at all when running at 100?+α.
View detail
It is quite small, but very effective!
I put it on my Wonderlich Screen and it looks great! The price is expensive for the small size, but it is just as I expected from Wonderlich. View detail
Fits: BMW RnineT, BMW RnineT, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT Pure, BMW RnineT Racer
It was early.
I was told that my order would be in stock in a week, but it arrived the next day after I ordered it.
The Pad in the Tank center section is quite effective.
Knee grip is easier.
View detail
rninet 2021
I think the quality and strength is good. (Also the price)
I'm personally satisfied with the size and the windproof effect, because the wind doesn't hit the lower part of the neck too much.
The only problem is that the brake hose and cables hit the screen stay.
I don't like it (because it rubs and causes future Trouble), so I use RubberTube and Bellows to protect my Cables.
I chose this product after searching for both Style and windproof effect.
I hope this is helpful.
View detail
"cool
I hated the OEM MeterScreen and replaced it with this one, but
It is very comfortable and Parenthesis is good.
However, there is not much windproof effect.
As for that, it seems to be the same no matter which manufacturer you choose, as you can imagine from the large size of this model.
View detail
I like the shape.
I replaced the OEM Screen because it was low and felt a bit Parenthesis bad. (Although, the windproof effect of OEMscreen isn't bad. Why?)
I went with the Wonderlich one because the thicker the better, the safer I feel!
The accuracy of the product was good and it arrived easily. Parenthesis is better as expected.
The windproof effect also reduced the wind hitting my shoulders and allowed me to concentrate on driving.
I have a GoPro on my Tank and it has reduced the wind noise.
View detail
It is quite good.
Although I prefer the STD Shape, I bought it because it is not too high and seems to be close to the STD Shape because it is often used in Touring and WindingMain. I think the rectification effect is quite good. [Color] Smoke is almost completely black; Meter is now easier to see, but you can't see anything through Screen. View detail
Wind does not come directly to hands.
By attaching this Parts, the wind will not be applied directly to the hand, so the winter riding & high speed cruise will be comfortable. Since I chose Clear color, I am familiar with Motorcycle without breaking Styling. View detail
Fits: BMW R1250RS, BMW R1250R, BMW R1200R LC water-cooled, BMW R1200RS LC water-cooled
water - Mud bouncing effect on dirt!
Just fixing it with Tie Wrap and Double-sided Tape, it's easy!
It effectively prevents water splashing around Suspension, so it is really good.
I was worried that Rear suspension spring is white and stains are conspicuous, but it solved it.
It is regrettable that it was not possible to use with Helmet holder made by KIJIMA.
I can not install it unless I fairly cut Inner fender.
Because the attachment part of Fender becomes very thin, we removed helmet holder without any help.
Well, it's useless because it's between other companies' products outside FOR JAPAN MODEL.
View detail
In the lower road Helmet's Shield is durable even if it is raised Large
It is as the title. The area is more than twice as large as NORMAL. Until now, when I got over 60 km / h, my breath became breathless and I took down the Shield, but after switching to this Screen I can beat more than 80 km. I will lower the shield on the highway. Touring destination scenery is now better visible.
View detail
I thought that it would be best for S1000R.
For S1000R Light and MeterPanel (Or the gap with Cowl Bracket) I thought that Screen of the shape that can be filled is the most Parenthesis good husband. I think it is very Parenthesis that the shape has become a rather complicated curved surface. I think that it is the best design including OEM among the S1000R.
Although OEM may be the best windproof performance... I toured about 250 km, but Wind Cutting sounds and vibrating etc etc. There was no negative element of. This is Smoke, but Smoke may be a bit more tight.
View detail