Reviews
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Product quality is the worst Level
After 5 months of ordering, it finally arrived and when I carefully unpacked it, it was covered in scratches. I am so disappointed. Don't they inspect the product before packing it.... It is a regrettable Manufacturer. I can't recommend them at all. View detail
Garbage too much grass.
The body is wrapped with PetitPetit, and the cushion is laid firmly, but when you open it, you see the wound.
Is this the fault of the carrier or the manufacturer…?
I was so dismayed by the workmanship that I wondered if I would be embarrassed as a PRO if I had been in this situation at the manufacturing company stage.
There is no Instruction Manual and I don't know how to attach it.
Also, although I can understand a slight error in handmade, the hole position is gapped 15mm from the center, and I am not sure if it can fit in there or not.
Garbage or Garbage? Are your eyes knothole? Are you ashamed of yourselves as PROs? It's a bit like a scam!
View detail
Don't touch it out of curiosity.
Mounted on NINJA2 Helmet 50RR.
The wall thickness is considerably thinner than that of the OEM, but the stiffness and strength are not hampered by this.
However, I would recommend that only those who are capable of machining Carbon should purchase this product, as there is a hell of heavy machining waiting for some products.
I mean, it's so much more difficult to process than FRP that I can say to anyone, I don't recommend it.
View detail
Material:What is the quality of FRP products?
I purchased the Under Cowl Tray for my ZX-10R and it arrived today!
When I opened the item, I saw a long scratch ・・・・・ and the uncolored part looked like a scratch.
Even assuming painting, I think it will inevitably look different in areas where light passes through and where it doesn't, but Material:What is the quality of FRP products like?
I'm a little disappointed.
View detail
It can be installed without any trouble.
Texture and accuracy are not as good as they are cheap.
I can install it for the time being, but I would have preferred to keep the OEM version instead of changing it.
View detail
Accuracy is quite poor.
Fitting is good on one side, but the other side is the worst fitted, and no matter how much double-sided tape is used to reinforce it, the surface is not in contact with the car body side, so it peels right off.
The carbon is not flexible enough to be used as a sticking point, and it fell twice while running.
The delivery time was quite long and the delivery schedule was postponed twice, so I can only say that I am disappointed.
View detail
Is this a guarantee of conformity?
What is the conformity guarantee for this product?
Made by A-TECH yzf -r1 4xv Fender Eliminator cannot be installed, but I was prepared to have to do some modification, but there are some parts (distortion, etc.) that cannot be modified due to the specifications other than those shown in the photos.
View detail
Quality not commensurate with price
To be honest, I can't say that the QUALITY is commensurate with the price.
The Screw holes do not match and the Bolt that comes with it is obviously too short.
The screw holes were not aligned, so I installed it forcibly, and the Crack was easily inserted.
Well, it is a handmade product, so accuracy may not be a problem, but I thought I would never buy A-TECH's parts again.
View detail
Isn't the error too Large?
The mounting holes did not fit at all, requiring considerable modification.
Seat baseRight rear hole extended to the Level where Washer is not available.
Therefore, I have been pondering various methods of fixing Bolt.
The base of the pedestal must also be machined considerably, or the load on the Seat Cowl will be Large and I think it will crack eventually.
I think it will be very scratchy, so if you can't separate the two, it is safer not to do it.
View detail
UnderCurl
I was delighted when the item arrived in mid-July when it was due in November!
When I saw the item, I thought it was used.
Most of the corners were White with the paint peeling and Black paint.
View detail
I ordered the Full Exhaust System for the pi... 。。。。。
The one not for Full Exhaust System pie arrived.
but the wait was so long that I gave up on returning and exchanging the product.
However, the custom feeling was UP.
View detail
The transparent Screen portion is unreachable.
I received the Carbon mounting base.
[Color] The Screen portion of Clear is not included and cannot be used.
The delivery date was originally scheduled to arrive in February, but was suddenly changed to June;
but arrived today (April 10).
When checked upon arrival, the Screen was not included.
If the product has a long delivery time, the contents should be properly checked and shipped.
I will not buy any more products from this Manufacturer.
View detail
The estimated date of arrival has passed?
It's past the expected delivery date, will it still take longer? View detail
6 months
How is it that you can't cancel the order in 6 months? View detail
It's been six months and I still haven't received it! I haven't heard from you!
Just when I thought the item wouldn't arrive past the estimated delivery date, the estimated delivery date was changed three times and it still hasn't arrived! (about 6 months)
No communication from Webig about the delay and no cancellation.
View detail
It's been 3 months since I placed an order and I still haven't received the product.
Three months after I placed the order! The product arrived too late. View detail
Garbage man. I don't even want to give you one.
They took the liberty of extending the delivery date about 4 times, and never contacted me.
In any case, when it arrives at hand, the folding method of Fitting, Carbon, and
I'm sure you'll receive a Garbage quality product in terms of all the ways to apply resin.
You should never buy anything from A-Tech.
He's doing all this stuff, and he's like, "Oh, TEC.
They get nicknames.
It's a wonder that a company like this can hire employees and stay in business.
View detail
Webig is not able to coordinate inventory and delivery at all.
How many times has the delivery date been delayed for months with no detailed explanation? If you don't know when it's coming, don't sell it! View detail
too late
It's now July and I placed an order in January and still haven't received it.
The shipping schedule has been stretched over and over every time it's due, and it's now the end of August.
If you're not afraid to wait a year or so, you may want to buy this product.
View detail
Be prepared for delays.
The goods will not come.
With the delays and delays, you should expect that it is unlikely to come on the scheduled date stated.
It's a shame because I wanted this product so badly.
View detail