Reviews
Boots Friction Prevention
I am very satisfied with the design and the ease of installation. View detail
Frame protection and improved gripping
Off-road motorcycles tend to peel off the paint on the frame when riding in Boots, because the frame is inevitably caught between the legs when standing.
From the viewpoint of preventing paint from peeling off and rusting, it is recommended to install frame guards.
Installation is easy because it is only fastened with a washer (sturdy rubber), but side covers and sprocket covers cannot be installed properly unless they are removed, even if it is a pain in the ass. It is a bit of a hassle, but it would be better to remove the Cover before installation.
View detail
Fast shipping to USA. Excellent tracking of order.
OEM product, fast shipping, excellent order tracking, good prices given the current US Dollar to Yen exchange rate. All good here! View detail
Genuine Polisport Frame Protectors for CRF250R
As this bike does take a lot of stick when it comes to being ridden in bad conditions, the purpose here was to get some better frame protectors. I have personally never used Polisport before but the customer specifically asked for this brand. Finding the part was not difficult at all as Polisport search function is really simple to use and you are greeted with what ever part is needed. The price from Webike was good value as they were actually in a sale at the time of ordering. I do have always some other parts to order so got them all shipped together via EMS. My order arrived very well packaged and 100% perfect condition. The frame porectors themselves a re a nifty piece of work. They are really a really tough rigid plastic composite but have a small amount of bend which makes this easy to fit. The finish and quality of these frame protectors is excellent as far as I can tell. They have a smoothed out matt look which works very well with the bike colour scheme. They attach pretty easily with the cable ties already included. If you wanted to go more permanent you could bond them on but cable ties for if you ever need to change them. Very pleased with this purchase and will look at Polisport in the future for other bikes if needed. Thanks Webike. View detail
Simple but good performance
It looks good, but the grip is good, so there is no burden when standing due to the grip of the boots and chassis. Installation is very simple and I think it's good because it prevents scratches.About quality and texture View detail
When the Center Stand is installed, a little effort is required.
The Instruction Manual indicates that the cover under the tank must be removed for installation, but it can be installed without removing the cover.
On the Left Side, the lower claw is first fitted and then fastened with two bands (Large and Small).
The Left bottom of the Right Side Cover interferes with the Center Stand, so it must be trimmed, including the claws.
I think you should cut at the base of Radio pliers and Cutter to Beauty!
Then fasten with Largex2 Band
Bundling Electrical Cord Covers Next Needle Gold Makes Banding Easier
View detail
When the Center Stand is installed, a little effort is required.
The Instruction Manual indicates that the cover under the tank must be removed for installation, but it can be installed without removing the cover.
On the Left Side, the lower claw is first fitted and then fastened with two bands (Large and Small).
The Left bottom of the Right Side Cover interferes with the Center Stand, so it must be trimmed, including the claws.
I think you should cut at the base of Radio pliers and Cutter to Beauty!
Then fasten with Largex2 Band
Bundling Electrical Cord Covers Next Needle Gold Makes Banding Easier
View detail
good-looking
It sticks tight like OEM. The ankle grips are good and easy to stand on. The ORing for the fixation may break someday, but it can be fastened with a bundle of wires, and the mechanics at the motorcycle shop liked it. View detail
Wow that's cool
[How is it used?
Dress-up
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
Safe in the event of a fall
[Included Parts:were they on?
(after the -te form of a verb) not ..
[Was there anything that disappointed you?
(after the -te form of a verb) not ..
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Carbon lovers will love it!
[How is it used?
When I bought a used WR250R, the lineup was abundant, so when my budget allowed, I bought a hanghang and a Z-CARBON, which has recently seen a sharp decline in the number of models available.
Especially for WR250R, the OEMOption Heel Guard was poor and difficult to use, so I remember purchasing this light and strong product in the early stages after purchasing the vehicle, coupled with its good parenthesis in appearance.
Was the one you received as per Image?
It was common in those days. "Carbon Style" Although Wet is not a product of the Carbon for goodness sake." It is a product and the texture is solid and as per Image which I am glad I purchased.
Was the installation difficult?
Quantity:Pair (for Left and Right) The Brake Side is a little tricky, but it is not so difficult that even beginners can install it if they take their time.
How was your experience with it?
In terms of functionality Wound protection from bouncing rocks and riding bootsetc. As I said, even a poor rider like me (a middle-aged eternal beginner who will never improve) has been working hard and not putting up roots.
The functional part of the Large thing. Cool above all!" It is a dream come true for the generation of old men who love CarbonMaterialLarge and can easily dress-up their hair.
[Included Parts:were they on?
Quantity of this product:Pair (for Left and Right) 1Quantity:Set and two Z-CARBON decals, plus UrethaneTape are included.
[Was there anything that disappointed you?
I heard that the screw hole had some gap when my friend installed it, but the product I purchased could be easily installed without any gap.
FRP and Carbon products are subject to slight individual differences. A little processing is no problem!" (Z-CARBON's products are more accurate than other companies' products.)
Other items that would be helpful
Point and hang of installation
By attaching the included Urethane Tape + Sponge tape (thin type) sold at 100-yen shops to the frame on the back side of the Plate, you can protect the frame from abrasion and wounds. "Human effort" Please put it on.
[Availability and clarity of the Instruction Manual
A simplified Instruction Manual was included, and even though it was simplified, it was easy to understand and follow because of the illustrated explanations.
[Notes]
There is nothing in particular. As mentioned above, after applying the anti-wound treatment to the frame, it is OK to carefully assemble the frame according to the Instruction Manual.
[ITEMS TO BUY TOGETHER
There is nothing in particular that I would recommend purchasing with this product.
[Opinions and requests to Manufacturer
I think it has decreased for various reasons, but it was relatively Reasonable and the quality was not bad among Carbon parts products. Z-CARBONSeries Please bring back the Lineup development of the "Lineup", please.
View detail
Fits: HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FE250, HUSQVARNA FE350, HUSQVARNA FE450, HUSQVARNA FE501, HUSQVARNA FE350S, HUSQVARNA FE450S, HUSQVARNA FX350, HUSQVARNA FX450, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TE150I, HUSQVARNA TE250I, HUSQVARNA TE300I, HUSQVARNA TX300I, GASGAS EC250, GASGAS EC250F, GASGAS EC300
Frame guard installed TE??FE
The standard Achal ScrewFrame guard.
Cover range is wider than OEM.
Blue type Frame guard on the TE of Blue type Frame,
Black type Frame guard is attached to Black type Frame FE.
Remember to remove the OEMParts collar and use it.
View detail
Really good quality and I like it
The quality is good and the construction is precise. The iron frame of the Hayabusa 3rd generation is too hot, so attaching this product alleviates the heat. The material perfectly expresses plastic or carbon patterns, adding to the sense of luxury.
The attachment method is double-sided adhesive tape. It seems a bit unstable, but it seems to have good adhesion since it is a part that gets hot when driving. -------------------------- -------------------------------- The quality is good and the creation is precise. The 3rd generation of Hayabusa is so hot that the frame part is so hot that it is relaxed. The material is perfectly expressed by plastic or carbon patterns, adding luxury. The attachment method is a double-sided adhesive tape. Powered by Google Translator
View detail
hayabusa origin
My car is Hayabusa Suzuki In the pure state, my feet were hot due to fever, but after I put it on, it changed to lukewarm I recommend genuine products instead of expensive carbon View detail
Dress-up8 Insulation 2, since the Frame wasn't that hot to begin with.
The shape is the same as Rye TEC and the accuracy is the same as Rye TEC, but you can choose Rye TEC for plain weave. View detail
Purchase due to excessive Frame heat.
Purchased for a 2012 s1000rr.
There was no floating of the frame cover, which I was worried about, and I was able to pimp it with double-sided tape.
Before I installed the Frame, it was so hot that my thighs felt red from the heat, but after I installed it, I did not feel anything.
View detail
I am glad I purchased it.
I ride a New Model GSX1300R HAYABUSA. I purchased this product to prevent heat buildup on my inner thighs when waiting at traffic lights or in traffic jams and in contact with the Frame. The other day in traffic (Meter outside temperature 34 degrees Celsius), the heat was considerably reduced. I could not touch it with my bare hands before installing it, but after installing it, I could touch it with my bare hands. (I am personally glad that I bought this product. View detail
very good at writing
I bought this as a mid-summer measure for my GSX1300R HAYABUSA, which has a crazy hot Frame.
It is usually dangerous because the Knees grip becomes hard even at spring temperatures.
The effect is so insulating that it can be felt.
Of course it's hot, but you don't need Pants with Heat Guard to get a Knee Grip and it's Large sturdy enough for a full day of riding.
Fit feeling is also no problem as it is OEM, and installation can be done by anyone as it is just a matter of attaching it with Tape.
The appearance is satisfactory for me to look at by myself. No one has ever noticed it.
View detail
Purchased for heat and appearance.
I bought it for the heat and to change the look.
My wife, who doesn't know much about Motorcycle, didn't see me put it on, but when she saw the GSX1300R HAYABUSA after I put it on. What? You changed this place too?" I realized that (Lol)
So the change in appearance is immediately apparent to the beholder, isn't it?
The work is a lot of double-sided tape, so it's a bit odd to peel off the film. (Lol)
Also, the Clutch Side is a little harder to stick than the Brake Side, so you have to be careful or the Large Side might look strange.
View detail
Guard rear master cylinder
I bought it to Guard the Rear master cylinder as much as possible.
The design is rugged and can be attached to SEROW without discomfort.
The Edge of the corner was standing up quite a bit, so I chamfered it with File.
We put several sheets of washers over the frame to get a clearance between the frame and the washers, and then attached a rubber board to the gap between the washers and the frame to prevent scratches and to act as a cushioning material.
I was worried that the radius of the Rear brake was quite close, so I shaved it off a little.
View detail
How effective is it?
I like the look of it. So far I don't mind the heat, probably because of the cooler temperatures. I'm wondering how it will be in the middle of summer. View detail