Reviews
Side Stand of CT110 HUNTER CUBJA 65
Side Stand, to protect the bottom. View detail
big
Slightly protruding? In the event of a fall
LargeDurable?
View detail
Good
The price is a little high, but it has good footing.
STAND is hard, which helps.
View detail
Fits: HARLEY-DAVIDSON SPORTSTER, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200T, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200V, HARLEY-DAVIDSON XL1200CB, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200CA, HARLEY-DAVIDSON XL1200C(110thAnv), HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200R, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL1200C
SIDEExtension
KIJIMA ： Since the delivery time for the Side Stand Extension was long, the one from Ippoku CycleWorks was in stock.
I went with this one. Installation was easy. The quality and other features are solid.
When driving, the foot may get a little stuck at traffic lights, but you may get used to it.
View detail
Fits: DUCATI MULTISTRADA V4, DUCATI MULTISTRADA V4 S, DUCATI MULTISTRADA V4 PIKES PEAK
My legs feel better.
I am very happy with Ducati's Brake pedal, as most of them are very apologetic. View detail
![Stand Height Bracket [Kickstand Shoe]](https://img.webike-cdn.net/catalogue/images/50737/22748760_1_TS.jpg)
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
demon who obstructs sentient beings from maintaining moral behaviour
The ground penetration was reduced, but not as effective as the price, and eventually they got in the way and were removed after a year or so. View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY
To secure the foothold for Side Stand
The side stand of CRF250 has a small contact surface with the ground (normal size), so it was purchased to increase the ground contact surface.
Screw lock agent was used for the mounting screws to be safe.
The product is made by ZETA and is very well made in Parenthesis.
The overall STAND seems to have been lengthened by about 5mm in order to make it wear clogs, so the OEMSide Stand, which is a drawback of CRF250, is long! Therefore, the demerit of CRF250, "OEMSide Stand is too long", became even worse.
If you do not consider the slope of where to stop with the Pannier case, you will need to be very careful where to stop in order for the Motorcycle to stand upright.
Not that this product is bad, but the company's Aluminum Stand might have been better for the above reasons.
View detail
Fits: SUZUKI V-STROM 1050XT, SUZUKI V-STROM 1050, SUZUKI V-STROM 1000XT, SUZUKI V-STROM 1000, SUZUKI V-STROM 250
Light weight, a bit soft
I installed Zeta side stand extender on my Suzuki v-strom 1000, it only takes a little time to install. The aluminum base is a bit soft, so it's easy to wear View detail
Fits: SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI BANDIT1250GT, SUZUKI BANDIT1250GT, SUZUKI BANDIT1250GT, SUZUKI BANDIT1250GT, SUZUKI BANDIT1200
Area0 Height0 Screw×.
In terms of extending the height and area of the Side Stand, it is a very satisfactory product.
However, the included screw is too short and loosens after continued use. Screw locker is recommended.
View detail
Causes were easier.
I think the construction of the product is very good.
The installation is of the pinching type and requires a little setting to eliminate gaps.
The cause was easier, but there were times when it was slippery or uncomfortable on Asphalt.
View detail
It's pricey, but I like Earls Gear.
There are many cheap STANDBrackets out there, but I bought this one because it is Earls Gear.
The price is high for what it is, but with the increased stability of the Side Stand and the way it looks, I'm somewhat satisfied!
View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z650, KAWASAKI Z800, KAWASAKI Z1000
Side Stand・Extension
Installed on Z900RS.
Tighten Screw up or down, Quantity:Pair (for Left and Right) There is rattling in the
The top and bottom directions are resolved by applying 0.75mm thick Double-sided Tape.
Quantity:Pair (for Left and Right) For the direction, a 2mm-thick plastic plate was cut and inserted into the gap to stop it from rattling.
For those who can handle the above level or do not mind rattling.
View detail
Size-wise, it doesn't fit a bit.
I use a Bolt with Washer to fix it because it is a three-point bolt but I can't hit one of the bolts. View detail
What about on the pavement?
If the place is gravel, dirt, etc.
I think you'll find it works.
On pavement, there is no overall feeling of ground contact.
Are only some parts of the body holding it up?
It's not that unstable.
Am I worrying too much about it?
No more parking mishaps on the road.
I hope so lol
View detail
It's huge.
I bought it with the intention of using it on my touring destination, but I laughed when I saw the actual product.
It's too big! I can't take it with me.
The diameter is about 16?
I have no choice but to use it at home.
View detail
Fits: HARLEY-DAVIDSON SPORTSTER, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200T, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200V, HARLEY-DAVIDSON XL1200CB, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200CA, HARLEY-DAVIDSON XL1200C(110thAnv), HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200R, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL1200C
Hmmm...
It looks good, but it feels strangely light and scantily clad.
I bought it on Sale, so it's okay, but if it was regular price, I think it would be expensive.
View detail
It is safe.
[How is it used?
I installed it the other day.
Was the one you received as per Image?
Yes. Just like the picture.
Was the installation difficult?
It is easy to raise it with Rear stand and fix it with Hexagonal Wrench in accordance with STAND.
How was your experience with it?
It increases stability and is easy to stop even on gravel.
[Included Parts:were they on?
Body、Screw、Instruction Manual
[Was there anything that disappointed you?
Just a little hit will scratch it and make it a little more noticeable.
View detail
![[YAMASHIRO] YK-017 Side Stand Pad](https://img.webike-cdn.net/catalogue/images/55528/YK-017_BK_TS.jpg)
for use at home
Purchased to park for Vehicle on the road.
I've only used it a few times, but so far no durability issues.
View detail
![Stand Height Bracket [Kickstand Shoe]](https://global.webike-cdn.net/photo/impression/0d/0db43db1d32fe7fd937ff65ae94f8e55L.jpg)
Fits: SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750
Safe when the ground is soft, such as gravel!
The image in the product description is a Sample!
The item you receive will be the Type in the picture.
A little cheaper would be appreciated w
View detail
Fits: YAMAHA serow250 s, YAMAHA SEROW250
Durability is a problem.
The Horn (Two Extensions) for kicking up the bike is Large and easy to use, but the Two Extensions came off after a year or so. I don't know why, I had it installed at a motorcycle shop, but the bolt is not the same as the material:It seems to be Aluminum. It is unbelievable that they use the aluminum bolt for the part that the stress is applied at every kick-up and kick-down. It is the Level of the old China product. The price is too high. The bottom plate is also Material:I don't think it has to be Aluminum. Because they are Parts that attach to Steel's OEMSide Stand. View detail