R&G Motorcycle Kick Stand Base / Extension Reviews

Filter

Write a review and get Webike Points!

Reviews

R&G

16 May 2023

Stand Height Bracket [Kickstand Shoe]

Fits: DUCATI 959Panigale, DUCATI 959Panigale, DUCATI 899Panigale, DUCATI 899Panigale, DUCATI 899Panigale, DUCATI 1299Panigale, DUCATI 1299Panigale, DUCATI 1299Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale

Japanese Webike user

4/5

Purchased for StreetFighterV2.

Purchased for Street Fighter V2 from the Parts List after confirming compatibility.
The ground surface of the STAND is small, so there is some concern about hanging the STAND on soft ground.
Clearance with Under Cowl was no problem, and it was easier to STAND.

It is not cheap, but if you feel Merit in increasing the ground surface of STAND, you may purchase it. View detail

R&G

14 May 2023

Stand Height Bracket [Kickstand Shoe]

Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)

Japanese Webike user

3/5

demon who obstructs sentient beings from maintaining moral behaviour

The ground penetration was reduced, but not as effective as the price, and eventually they got in the way and were removed after a year or so. View detail

R&G

26 Mar 2023

Stand Height Bracket [Kickstand Shoe]

Fits: SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI BANDIT1250GT, SUZUKI BANDIT1250GT, SUZUKI BANDIT1250GT, SUZUKI BANDIT1250GT, SUZUKI BANDIT1200

Japanese Webike user

3/5

Area0 Height0 Screw×.

In terms of extending the height and area of the Side Stand, it is a very satisfactory product.
However, the included screw is too short and loosens after continued use. Screw locker is recommended. View detail

R&G

07 Apr 2022

Stand Height Bracket [Kickstand Shoe]

Japanese Webike user

1/5

After waiting for so long, is this the extent of Level, Webig!

Item #:PKS0035SI, no doubt, but the design is different from what's pictured!
If you changed the design, shouldn't you change the picture too? View detail

R&G

04 Apr 2022

Stand Height Bracket [Kickstand Shoe]

Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000

Japanese Webike user

2/5

The product photo and the actual product are too different.

The product picture is too different from the actual product received.
Notes. The photograph is an Image and may differ from the actual product. I think it says something like that, but it is too different.

I paid almost 9,000 yen expecting to see a picture of the product, and this is not what I got.
depending on the person "There's R&G." And "It happens all the time with R&G." It is said that the WeBig side of the product listing
I think it's a problem, don't you?

Please compare the product photo with what you actually received.
The picture was taken at Image..." I don't think it can be done. View detail

R&G

12 Jul 2021

Stand Height Bracket [Kickstand Shoe]

Fits: SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750

Japanese Webike user

3/5

Safe when the ground is soft, such as gravel!

The image in the product description is a Sample!
The item you receive will be the Type in the picture.
A little cheaper would be appreciated w View detail

R&G

06 Jun 2021

Stand Height Bracket [Kickstand Shoe]

Fits: MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4 RR, MV AGUSTA F4 RC, MV AGUSTA F4 RC, MV AGUSTA F4 RC, MV AGUSTA F4 1000R, MV AGUSTA F4 1000R312, MV AGUSTA F4 1000R312, MV AGUSTA F4

Japanese Webike user

5/5

R&G Stand High Bracket

Italian Motorcycle Side Stand is terrible so …
Especially the AGUSTA system is a must!
It's also more stable.
It is easy to STAND out and easy to kick up and deliver.

https://ameblo.jp/keikocookingchicken/entry-12674055267.html View detail

R&G

27 Sep 2019

Stand Height Bracket [Kickstand Shoe]

Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R

Japan User(translated)

3/5

Good stuff, but expensive

When the Side Stand is applied, it is extremely tilted to Left for some reason I bought it because I felt uncomfortable that I didn't feel like I was standing on a stand, I had a good sense of security and accuracy, but it was a bit more Smaller looking is better looking View detail

R&G

13 Jan 2019

Stand Height Bracket [Kickstand Shoe]

Fits: HONDA CRF250M, HONDA CRF250M, HONDA CRF250M, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L

Japan User(translated)

4/5

2016:Used in CRF250L

It was supposed to arrive on 2/17, but I received an email yesterday saying it was shipped today
I felt happy that it was faster
I had been looking for it for a long time, but it was only R&G and the price was too high, so I was hesitant to buy it It was on sale at the end of the year for about 5,000, so I bought it
The installation was still easy when installed on a new car, I think, but in two years Side Stand The ground surface of the
The Stand End part was corrected and polished with the knife sharpening File and finally entered exactly
The screw is so shallow that even a little distortion is not allowed
The finish is beautiful
That's the R&G company
Finally, you can now park in mud and loose surfaces
Molybdenum grease is applied between the Stand End and R&G's Shoe Locking fluid is applied to the screws to prevent rust and detachment
Thank you very much
However, the actual finished product was better, although it was a bit different from the photo View detail

R&G

18 Nov 2017

Stand Height Bracket [Kickstand Shoe]

Japan User(translated)

4/5

Ideal for soft road surface

If Normal muffler raises STAND, Limit does not hit Clearance. Since installation is Small compared to STAND, even if you hang it down, it does not enter. Although I was worried whether to cut or not, since the material is Aluminum, I applied Dustcloth so that scratches did not get into the STAND, and when I hit it with Praghan, I could install it. It is good to think about it because there is no play. View detail

R&G

26 May 2017

Stand Height Bracket [Kickstand Shoe]

Fits: DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Scrambler Classic, DUCATI Scrambler Classic, DUCATI Scrambler Classic, DUCATI Scrambler Icon, DUCATI Scrambler Icon, DUCATI Scrambler Icon

Japan User(translated)

3/5

The angle at parking is standing and it is a nice feeling.

When parking in the side of the road, if the road is a kamaboko type,
The car body as compared to placing it in a horizontal place (Sleeping too much) I will.
When this product is installed, Side Stand becomes about 5 mm longer
A little angle of Motorcycle will occur.
Although it is just a little change, I feel like I can easily raise a single car.

However, I knew it after purchasing, but similar products are on sale in other Manufacturers,
Especially what made by TOURATECH is cool with DUCATI with Logo.

I hope that it will help prevent snagging on lawn such as Camping place. View detail

R&G

23 Apr 2017

Stand Height Bracket [Kickstand Shoe]

Japan User(translated)

3/5

The mounting accuracy is bad

GSX 1300 R HAYABUSA has a large slope when stopping at Side Stand, so weigh down when raising
I bought it in the summer to prevent STAND from getting into Asphalt.

Mounting is essentially just fitting and tightening 3 Screws.
However, unfortunately it is not possible to enter either STAND or product.
I deleted STAND with Grinder.
Since the depth is small and the STAND does not run even after cutting it, it is impossible to put on the top covering?.
You can not install it unless you cut the depth of the product or cut the back of the STAND to thin it.
I built my own Spacer in between.
Another Bolt was necessary because the Bolt's Length is insufficient with Spacer's thickness.
It may be different depending on the type of car, but I did not buy it if I knew that it was necessary to process this much.
If you are not confident in machining tools or machining, I think that you should ask Shop for installation.

Nice place
- You do not have to take things to lay under STAND in the summer.
- Since the STAND becomes longer by about 5 mm, it is easier to wake it from the time of stopping.

A bad place
- The mounting accuracy is very bad..
- Price is too high.

Others
- For vehicles that are Lowdown by footbed countermeasure, STAND is about 5 mm but it gets longer.
- If there is an Exhaust System on the side where the Side Stand is located there is a possibility of contact during storage.
- It takes a car weight and contacts the ground so it's a bit sad to be scratched (Lol) View detail

R&G

23 Oct 2016

Stand Height Bracket [Kickstand Shoe]

Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR

Japan User(translated)

4/5

To people with short legs - - -

【What made you decide the purchase?】 When stopping at soft soil, STAND was sunk and scared because it was scary.

【How was it actually trying?】 It can be stopped steadily even on soft soil and it also makes it easy to cause riding when on board.

[Is there anything I was disappointed about?] None

【Hope for Manufacturer - Please let me know if there are any improvement points; Please make it a little cooler design.

【Have you compared items?】 D company STANDLARGER

Product of D company bought by looking at the conformity table but purchased it, I returned it with absolutely different dimensions to the extent that I think that installation was confirmed?. I was on the 13-year CBR600RRJapanese specification, I thought that the STAND shape is different in the reverse car, but as I was able to attach the R & G product of this foreign Manufacturer - - - Company D - - -
Apart from that - - - I am a short-standing SS rider. In the case of stoppage, I put my feet on the right for short legs, but I put my feet on Right, but in order to get ass to Right it is difficult for my legs to reach when giving a STAND with Left feet, so it is difficult to get out of STAND. However, when attaching this product, the point of STAND got heavier, so if STAND 's feet arrive even a little bit, STAND will come out spatially! Afterwards if you attach this product you get a little car body so get on When it happens, the cause is easier. When I saw the product of company D, he said, "Large younger than I thought - - - I thought that this product is exactly Large Kimono. Even though it became easier to put in and out of STAND as a by-product, this item is a divine item for me with short legs - - - It is Recommendation for people who are difficult to put in and out of STAND!
View detail