Reviews
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY
Good product
About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing "Very good product" View detail
I like that the quick stand has a wider contact surface.
The stand has become wider, so it feels more sturdy, and the clamping force is good.
I don't think you should tighten it too much when tightening it. I think it would be good to give guidance on the level of tension.
The dress-up effect is also the best..^^
I will use it well.
ZETA is also good.
-------------------------------------------------- -------- The stand is wider, making it a bit stronger and good with a feeling of fastening. I can't tighten too much when I sign up. It would be better to guide the tension level. The Drone Up effect is also the best.. ^^ I will use it well. Zeta is also good. Powered by Google Translator
View detail
I'm satisfied
With its large area, the motorcycle can be stably erected. I didn't know how to use the two rubbers in the components, but I used only one of them. View detail
Fits: SUZUKI V-STROM 1050XT, SUZUKI V-STROM 1050, SUZUKI V-STROM 1000XT, SUZUKI V-STROM 1000, SUZUKI V-STROM 250
Cospar good
The inexpensive but solidly made unit is secured with a Screw lock after applying Strong Double-sided Tape.
So far it has been working normally with no rattling or loosening.
I know there are individual differences, but in the case of my Motorcycle, it rubs lightly on the Center Stand when the Side Stand is stowed.
View detail
It is a product of a trusted Brand, so it matched TENERE perfectly!
Zeta is a Brand that I have heard a lot about and felt familiar with, so after comparing similar products from other Brands, I decided to go with Zeta this time. The installation went without a problem and the Parts fit perfectly with TENERE (2024 MODEL).
Since this is a product with a wider leg of Side Stand, it is natural that, depending on the ground conditions, you will kick the ground when setting up the STAND, so we often apply the STAND by pushing the Motorcycle a bit toward the Right.
View detail
Increased stability
The OEM Side Stand also has a larger ground clearance than the JA55, but we installed it to make it more stable. It is easy to install, just fasten two Bolts and it does not interfere with the Chain.
If I had my way, I would like to have colors other than Silver.
View detail
Quite stable.
Since the top case was attached far back, it was often wobbly, but with this attached, it became much more stable. View detail
Side Stand of CT110 HUNTER CUBJA 65
Side Stand, to protect the bottom. View detail
JA45CROSS CUB
Was the one you received as per Image?
Image
[How did you feel about the Fit?
Fit perfectly!
I cut and sandwiched the provided rubber sheet and installed it using a strong screw lock agent.
How was your experience with it?
Since the rear tire diameter was increased, I installed it in the hope that it would extend the side stand. (I changed from OEM 2.75 to 3.0 and increased the tire diameter to the extent that the rear wheel stays on the ground when the Center Stand is set up.)
Is it about the same inclination as before the tire replacement?
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY
To secure the foothold for Side Stand
The side stand of CRF250 has a small contact surface with the ground (normal size), so it was purchased to increase the ground contact surface.
Screw lock agent was used for the mounting screws to be safe.
The product is made by ZETA and is very well made in Parenthesis.
The overall STAND seems to have been lengthened by about 5mm in order to make it wear clogs, so the OEMSide Stand, which is a drawback of CRF250, is long! Therefore, the demerit of CRF250, "OEMSide Stand is too long", became even worse.
If you do not consider the slope of where to stop with the Pannier case, you will need to be very careful where to stop in order for the Motorcycle to stand upright.
Not that this product is bad, but the company's Aluminum Stand might have been better for the above reasons.
View detail
ZETA Side StandExtender
The price is a little high, but it is easy to install because all you have to do is insert the bolt and tighten the bolt. The ground contact area of the STAND has been widened, so I think it is more stable in places with poor footing, etc. View detail
Fits: SUZUKI V-STROM 1050XT, SUZUKI V-STROM 1050, SUZUKI V-STROM 1000XT, SUZUKI V-STROM 1000, SUZUKI V-STROM 250
Light weight, a bit soft
I installed Zeta side stand extender on my Suzuki v-strom 1000, it only takes a little time to install. The aluminum base is a bit soft, so it's easy to wear View detail
Just pinch and tighten with Bolt.
The product is installed on a large surface to prevent it from being dug into the lawn where it is stored.
Looks good!
View detail
You're safe now.
More than just a change in appearance, this thing allows me to park safely on unpaved roads.
I'm satisfied
View detail
I am concerned about the protrusion on the back.
I installed it for the purpose of compensating for the unstable elements of OEMSTAND (just my subjective opinion).
The manufacturer is well made and there were no problems with the installation.
I am happy with the purchase for both the security and improved quality, but my only concern is the protrusion of the head of the 3-point bolt at the bottom of the STAND, where it touches the ground, and I am putting down Rubber to protect the floor of the Garage.
It is a pity, because it seems that the protrusion could have been eliminated with some design work.
View detail
Safe on any road surface
Purchased for Grom.
I am worried after it rains because the ground of my house is soil.
So we installed this product.
Since I installed it, it has not sunk at all when it rains, which is a relief.
The vehicle itself is light, so it does not sink that much, but it is more effective when things are loaded in the Rear box, etc.
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY
It's huge.
The body of the car leans a lot when STAND is applied& I bought it to try to secure the ground surface.
Installation is very easy as it only requires screw fixation while using the screw lock together.
After installation, the thickness of the Plate allows the vehicle body to stand up, and it is now possible to STAND stably even on uneven terrain.
However, it is huge.
View detail
It is still good.
This is my second purchase after CROSS CUB. It still gives me a different sense of security. View detail
Feeling of security
[How is it used?
Touring
Was the one you received as per Image?
Yes
Was the installation difficult?
it's simple
How was your experience with it?
Parking is now possible without worrying about the road surface.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
None
Other items that would be helpful
If you have a Center Stand, it is easy to install, but if not, you can install it while supporting the car body with your body.
View detail
Installed to increase STAND ground contact area.
I had replaced it with Side Stand Assy until the previous vehicle, but there was a special Plate for CROSS CUB, so I installed it.:I installed it on top of 1pc. and coated it with Bond on the Bolt tip. I like the design and manufacturing. View detail