Reviews
Does not fit Hunter Cub J65 vehicle...
I really like the quality and finish of the product...
It doesn't fit my hunter curve.
I searched and purchased it, but this was the first time I realized that there were separate markings of 55 and 65 in the model name.
Perhaps it was for domestic use or for export, but it did not fit the Korean stand.
That's too bad. -------------------------------------------------- -------- I really like the quality and finish of the product ... It doesn't fit my hunter curve I searched and purchased, but I first learned whether there were 55 and 65 notations in the model name. It was not suitable for the Korean stand, whether the domestic export was wrong. That's too bad. Powered by Google Translator
View detail
Fits: HONDA Rebel250, HONDA Rebel500, HONDA Rebel300, HONDA Rebel300
Increased stability
Narrower Side Stand,
Purchased because it was unstable depending on where I parked.
It is thicker and more stable.
Installation was easy, but a Hexagonal Wrench is required.
The size of the Hexagonal Wrench was not mentioned in the product instructions, so that is a point of dissatisfaction.
View detail
I'm satisfied
With its large area, the motorcycle can be stably erected. I didn't know how to use the two rubbers in the components, but I used only one of them. View detail
Fits: SUZUKI V-STROM 1050XT, SUZUKI V-STROM 1050, SUZUKI V-STROM 1000XT, SUZUKI V-STROM 1000, SUZUKI V-STROM 250
Cospar good
The inexpensive but solidly made unit is secured with a Screw lock after applying Strong Double-sided Tape.
So far it has been working normally with no rattling or loosening.
I know there are individual differences, but in the case of my Motorcycle, it rubs lightly on the Center Stand when the Side Stand is stowed.
View detail
Increased stability
The OEM Side Stand also has a larger ground clearance than the JA55, but we installed it to make it more stable. It is easy to install, just fasten two Bolts and it does not interfere with the Chain.
If I had my way, I would like to have colors other than Silver.
View detail
Fits: BMW R1250GS, BMW R1250GS-ADV, BMW R1250GS HP, BMW R1250GS-ADV HP, BMW R1200GS, BMW R1200GS-ADV, BMW R1200GS Rally
There is a reason for the price!
It's pricey, but it seems to use a very strong material.
I moved the Motorcycle a little with the Side Stand on, and the Concrete on the Garage was shaved. Of course, installation was easy.
View detail
Fits: BMW R1200GS, BMW R1200GS Premium Line, BMW R1200GS Rally Premium Line, BMW R1250GS HP Premium Line, BMW R1250GS Premium Line
If you don't mind the price...
I bought it to bulk up the height rather than the width of the seat.
The side stand makes it much better to lean when stopping.
I am satisfied with the quality of the product. Installation is easy with only 3 Bolts.
The drawback is its price, which I knew before I bought it.
Opinions differ as to whether one can afford to pay about 15,000 yen for Side Stand clogs.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 TRACER, YAMAHA MT-09 TRACER GT
Side Stand For prevention of sinking
The parking lot where we stopped for touring was gravel, and although the MT-09 with only the Side Stand did not fall over, it was quite unstable because the Side Stand was stuck in the gravel, so we installed it as a safety device.
I would have preferred to have it in black, but the upper plate is stainless steel, so I wondered if that would be cost-effective. I was looking at the instruction manual and found that the Illustration of the Parts was wrong as in the case of SIDEWing….
If you have seen the instruction manual, you should not read it carefully, because it will confuse you.
However, I think it is still a little expensive, perhaps because of the weak yen, so if you are likely to encounter gravel parking lots or scorching hot asphalt on your touring, you may want to consider the risk of not being able to drive due to damage to the clutch lever in case it falls over, and the cost of replacing the lever. Considering the cost of replacing the lever, I think it is a good idea to install the clutch lever as a precautionary measure.
*
View detail
ALL ALL Side Stand End
Installed on a 2014 MULTHI.
The reason for this is to reduce the difficulty of waking up the STAND when it is overloaded during the Hokkaido Touring because it feels like the STAND has been defeated and the inclination is too large.
Although it was not MULTHI compliant, I purchased it and had no problem installing it, but when I paid for it, it interfered with the main stand.
The installation was easy and the quality is satisfactory, but the side stand deformation is not resolved, so we are in the process of purchasing and arranging for an OEM to replace it.
If the deformation returns, it will likely be too thick and will have to be removed.
View detail
Fits: HARLEY-DAVIDSON SPORTSTER, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200T, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200V, HARLEY-DAVIDSON XL1200CB, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200CA, HARLEY-DAVIDSON XL1200C(110thAnv), HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200R, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL1200C
High quality construction
I was looking for a good looking Extension because I was having trouble finding it on my heels when I was putting out the Side Stand. That's when I came across this product in a Custom video and purchased it.
The product was carefully packaged and the product itself seems to be of high quality and carefully made. After installation, the STAND was easy to put out and of course, it looks elegant. If the price were a little lower, it would be a perfect score.
View detail
![Stand Height Bracket [Kickstand Shoe]](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0165/22748770_1_TS.jpg)
Fits: DUCATI 959Panigale, DUCATI 959Panigale, DUCATI 899Panigale, DUCATI 899Panigale, DUCATI 899Panigale, DUCATI 1299Panigale, DUCATI 1299Panigale, DUCATI 1299Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale
Purchased for StreetFighterV2.
Purchased for Street Fighter V2 from the Parts List after confirming compatibility.
The ground surface of the STAND is small, so there is some concern about hanging the STAND on soft ground.
Clearance with Under Cowl was no problem, and it was easier to STAND.
It is not cheap, but if you feel Merit in increasing the ground surface of STAND, you may purchase it.
View detail
ZETA Side StandExtender
The price is a little high, but it is easy to install because all you have to do is insert the bolt and tighten the bolt. The ground contact area of the STAND has been widened, so I think it is more stable in places with poor footing, etc. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z650, KAWASAKI Z800, KAWASAKI Z1000
It was Exactly
It was Exactly for Z800. It was so Exact that it floated if the screws were not tightened evenly etc. during installation.
I applied Screw lock and installed it.
The size was larger than I expected, but I think the effect is larger than I expected.
View detail
Fits: HONDA PCX160, HONDA PCX150, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX160
This time, I got it.
However, the gap between the side stand and the body of the PCX seems to be quite different depending on the aircraft, and I gave up trying to install it because of the contact with the body. I was looking for something large and sturdy, and I found this Endurance product, which was designed with the part where the stand might come in contact shaved off, and I was able to install it perfectly. However, I gave it less stars because the quality was the same as the C-country made but the price was higher. View detail
![[YAMASHIRO] YK-017 Side Stand Pad](https://img.webike-cdn.net/catalogue/images/55528/YK-017_BK_TS.jpg)
To avoid damaging the floor with the Transporter
I purchased this as a Side Stand receptacle when transporting a vehicle by Transporter.
This is not a problem if the vehicle has a well-machined floor, but when Tie Down is applied with Side Stand on a carpet floor, if the Tie Down is applied too tightly, the STAND will again dig into the vehicle floor, damaging the floor.
To prevent this, the floor is less likely to be damaged because the pressure is dispersed when such a board is laid down. Also, it is possible to apply a firm "Tie Down" even on soft floors such as carpet.
Basically, I leave it loaded in my car and use it when I use Transporter.
View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX160
ENDURANCESide Stand Board
I installed it on enduranceshort stand to match the vehicle height down, but the angle is too high and the bottom of the board doesn't touch the ground at all. I think it is made for the Normal stand, but the product feels solid. View detail
I am concerned about the protrusion on the back.
I installed it for the purpose of compensating for the unstable elements of OEMSTAND (just my subjective opinion).
The manufacturer is well made and there were no problems with the installation.
I am happy with the purchase for both the security and improved quality, but my only concern is the protrusion of the head of the 3-point bolt at the bottom of the STAND, where it touches the ground, and I am putting down Rubber to protect the floor of the Garage.
It is a pity, because it seems that the protrusion could have been eliminated with some design work.
View detail
![[YAMASHIRO] YK-017 Side Stand Pad](https://img.webike-cdn.net/catalogue/images/55528/YK-017_RD_TS.jpg)
Currently being utilized in a gravel parking lot at a Touring destination.
If it is available, we will use it, if not, we will devise a way to stop it, but we can stop it without much concern.
A conspicuous color is recommended to prevent misplacing them.
View detail
Fits: BMW R nineT, BMW R nineT Pure, BMW R nineT Scrambler, BMW R nineT Urban G/S, BMW R nineT Pure, BMW R nineT Scrambler, BMW R nineT Urban G/S
It is effective. However, there are some things to watch out for.
The unnatural collapse when the Side Stand is applied has been eliminated, and it now looks natural.
The installation itself is easy, but there is a Point to attach it properly.
The Side Stand must be completely floated to properly align the floor ground contact surface of the product and STAND.
It is better to use a Center Stand or have someone support the Motorcycle.
Screws are too short, so screw lock agent is necessary.
The product is a heavy lump of Gold; depending on where you place the Motorcycle, it may scratch the floor.
View detail
Safe parking for Camping area and hot Asphalt.
I was concerned about the small side stand with a small ground surface, so I purchased this product, which is compatible with the TORACER.
The design is good and anyone with a Hexagonal Wrench can put it on.
When I temporarily aligned the upper plate, it floated a little, so I was a little concerned, but after tightening the bolt, I was able to attach it without any problem. Just to be sure, I tightened the bolt after applying screw lock agent.
It is safe even if you forget the STANDPad during camping touring, and it eliminates the fear of tipping over when parking on the hot Asphalt in the summer.
I guess it is a little expensive for a car model-specific product of Puch, but I gave it 3 stars for cosmetics.
View detail