Reviews
Fits: BMW R1200GS Rally Premium Sport, BMW R1200GS-ADV, BMW R1200GS-ADV Premium Line, BMW R1250GS HP Premium Sports, BMW R1250GS-ADV HP Premium Line, BMW R1250GS-ADV Premium Line
This will keep you from getting stuck.
This is a standard product for BMW and the effect is outstanding. The quality is good and satisfactory. View detail
Installed to increase STAND ground contact area.
I had replaced it with Side Stand Assy until the previous vehicle, but there was a special Plate for CROSS CUB, so I installed it.:I installed it on top of 1pc. and coated it with Bond on the Bolt tip. I like the design and manufacturing. View detail
Fits: HONDA CRF250RALLY LD, HONDA CRF250RALLY, HONDA CRF250L LD, HONDA CRF250L, HONDA CRF250M
Fall prevention
When it rains and the bicycle parking lot at home is muddy, the normal stand naturally slips under the weight of the car and has fallen over.
Since then, I have buried the Block in the bicycle parking lot and parked my bicycle there.
However, I bought it because I thought it would be a bad idea to have a similar Situation outside of my home.
Now I can park my bike without worrying about location.
View detail
Solidly built and secure.
[How is it used?
Expand the footprint of the Side Stand to a larger area.
Was the one you received as per Image?
Street Image
Was the installation difficult?
If the Center Stand is set up, installation is completed with 4 Bolts.
How was your experience with it?
The side stand slightly raises the angle of the car body when parked, making it easier to raise the car body after boarding.
The installation area will be increased, so it will be possible to park stably even if the ground is somewhat soft.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
I think the price is just a little high.
The construction is solid, so I can say it's worth the price in a good way.
View detail
Fallen cannibals
When I am out on the road and the ground is gravel, or in Asphalt where the ground is softened by exposure to high temperatures, the STAND may sink and the motorcycle may tip over, so I keep it in my bag at all times. It is like an insurance policy, but it gives me peace of mind. View detail
I couldn't fit it on my Grom JC92.
Thank you for all your help.
Unfortunately, this time, the Size did not fit delicately and could not be installed.
It may be an individual difference in the product, but it is unfortunate.
Therefore, the rating must be the lowest.
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY
ZETA Zita Side StandExtender
Now you can stop your Motorcycle without worrying about the road conditions. It looks good and GOOD!!! View detail
side stand
About quality and texture The front fork is xr100, so there was no problem using the standard tape100 stand About the feeling of use There was no big difference from the standard Products to buy together Overracing backstep must be together Difficulty of installation Contrary to the standard, the spring had to be installed in reverse Cost performance and comparison with other products It has a design that is close to the standard of other products About shipping and packaging I received the delivery in a week Any concerns, cautions, or advice when purchasing You should also purchase the APE100 standard front pork stand with ape50 stand View detail
It is easy to install.
Mounting is on the bottom of the OEMSTAND for a sandwich between the bottom and top of the STAND.
The included rubber sheet prevents rattling.
Screw lock was applied to prevent Bolt from loosening due to vibration.
It is useful for parking bicycles in Camping grounds where the bottom is unstable.
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY
Great!
Purchased for going on a forest road touring... View detail
Fits: KAWASAKI Z650RS, KAWASAKI Versys-X 250, KAWASAKI Z900 RS Cafe, KAWASAKI Z900 RS, KAWASAKI ER-6n, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI ER-6f, KAWASAKI Z900, KAWASAKI Versys-X 300, KAWASAKI Versys 1000, KAWASAKI Versys 1000, KAWASAKI Z650, KAWASAKI Versys 1000, KAWASAKI ZX-6R, KAWASAKI Ninja 1000 SX, KAWASAKI Versys 1000S, KAWASAKI Versys 1000SE, KAWASAKI Ninja1000 (Z1000SX, KAWASAKI Ninja1000 (Z1000SX
Highly textured and safe even on soft road surfaces
I used it on my '19 MT-07 and found it to be very stable on dirt roads, so I thought I would use it on my '18 NINJA650, but I was afraid it wouldn't fit. The manufacturer's hp shows the z650 and NINJA650 as an attachment. I took a chance and bought it because it was listed as an attachment for z650 and NINJA650 on the manufacturer's hp. After receiving the product, there was no mention of NINJA650 in the Package, but it was listed as an attachment for z650 and NINJA650. [Color] The clear is also sufficient. I installed it right away and it has been running for less than 500 km without any problems. View detail
Fits: HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports
Required for〈s〉Spec.
There are two types of center stands, one for the normal model and the other for the "s" model, but the "s" model tilts considerably.
Appropriate by this Parts? (I could stand up more). The position of the camera could be corrected.
The plate is held in place by four screws, but a screw lock agent was used in case of unexpected failure.
View detail
Size-wise, it doesn't fit a bit.
I use a Bolt with Washer to fix it because it is a three-point bolt but I can't hit one of the bolts. View detail
it's worth putting on
It works quite well when parking on rough terrain.
A SCREW LOCK is required for installation. A separate STAND is also required to make the project easier.
After installation, the tilt of the bike when parking will change, so be careful to pay attention to the slope of the ground, or the motorcycle will stand upright and become unstable.
View detail
I think it will look and function better.
[How is it used?
Only city driving and day-touring.
I was curious about the Side Stand, which has a simple structure compared to the body of the car.
Purchased
Was the one you received as per Image?
It was as luxurious as the Image or even more so.
The detailed finish is so beautiful that it is almost a shame to use it.
Was the installation difficult?
Maintenance Standetc., if you have something that can Lift the body of the vehicle.
It is easy. If necessary, screw lock materials are available.
How was your experience with it?
The body of the car didn't change much in its wake.
The Side Stand will not stop rolling into the gravel.
[Included Parts:were they on?
Only Screws and a simple Instruction Manual were needed for fixing.
The Manufacturer is a good feeling Manufacturer, packed in a solid box.
View detail
Wide Plate
I put it on for stability in the sand.
It is heavy but nice.
We wanted to unify the color with Black, so we painted it.
View detail
Touring Companion.
I bought it to run Senrihama Nagisa DriveWay.
There are also holes for attaching ropes, making it easy to use.
It is likely to be able to use it in Touring destination other than Senrihama.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
After waiting for so long, is this the extent of Level, Webig!
Item #:PKS0035SI, no doubt, but the design is different from what's pictured!
If you changed the design, shouldn't you change the picture too?
View detail
I use it in my home Garage.
I use this product at home in Garage and I like it because it prevents Rust from sticking to Concrete on rainy days. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000
The product photo and the actual product are too different.
The product picture is too different from the actual product received.
Notes. The photograph is an Image and may differ from the actual product. I think it says something like that, but it is too different.
I paid almost 9,000 yen expecting to see a picture of the product, and this is not what I got.
depending on the person "There's R&G." And "It happens all the time with R&G." It is said that the WeBig side of the product listing
I think it's a problem, don't you?
Please compare the product photo with what you actually received.
The picture was taken at Image..." I don't think it can be done.
View detail