Reviews
Fits: YAMAHA serow250 s, YAMAHA SEROW250
Durability is a problem.
The Horn (Two Extensions) for kicking up the bike is Large and easy to use, but the Two Extensions came off after a year or so. I don't know why, I had it installed at a motorcycle shop, but the bolt is not the same as the material:It seems to be Aluminum. It is unbelievable that they use the aluminum bolt for the part that the stress is applied at every kick-up and kick-down. It is the Level of the old China product. The price is too high. The bottom plate is also Material:I don't think it has to be Aluminum. Because they are Parts that attach to Steel's OEMSide Stand. View detail
It is not bad
I have a Motorcycle in my yard, but the ground is dirt, so it's unstable when it rains.
So I bought this one and installed it in a position to put the Side Stand in.
I think the strength is high for being light. The disadvantage is that it is difficult to find in the dark when it is black, and because it is light, it is sometimes blown away in the strong wind.
Other than that, I have no complaints and I am still using it.
View detail
It's not exactly Bolt On!
I bought it because I was worried about where to stop it, but the installation requires some work.
While confirming the part that interferes, it shaved and attached with File.
View detail
Camping touring with full load and expecting to be effective?
I have always felt that the car was leaning too much when stopping at the side stand, so I will be able to use this system in the future Extension to reduce tilt in case of a full load for camping touring installed
I was a little concerned about hanging STAND in places with bad footing and on the shoulder of the road, but as you can see in the photos, I was able to get it to work Balance seems to be a good choice when carrying Large luggage, as it is quite low leaning
It also increases the footprint of the STAND, so it can be used in places where the ground is soft, such as camping grounds You can also expect the STAND to be less likely to be plugged in
As expected of Earls Gear, it has a high quality feel to it
However, there is a part that doesn't fit perfectly with the STAND shape, and the fixed part is slightly floating There is
It seems to be perfectly fine for use, so I'm using it as is
Also, because of the reduced leaning, you have to raise the body of the car more than usual when applying STAND This should be considered a TradeOff
The price is quite high, so I was quite hesitant to buy it, but overall I am very satisfied with the product
View detail
Good design and functionality
When I purchased this product, I bought it on an applicable car and I could not install it well It fit the STANDBracket of the Motorcycle perfectly, but the Bolt is in the back I was only able to stop two of them The first one hit a STANDfootpeg weld and the top cap of the Bracket I purchased The part, per bolt was shaved After completion, it is stopped by two bolts on the back side of two bolts I am worried while running
After installation, the leaning of the Motorcycle has been eliminated
View detail
Cost performance?
I think the original Stand End part is also quite wide, but I bought it for more stability I did
As a manufacturer in Taiwan, I was a little anxious, but it was not that complicated It's not Parts, so I was able to put it on quickly and easily
It is important to note that the body is aluminum and the attached Bolt is also It's aluminum, so if you tighten it too much, it will break in a flash
The red color is also a nice touch
But is it still too expensive? I think so
View detail
![Stand Height Bracket [Kickstand Shoe]](https://img.webike-cdn.net/catalogue/images/50737/22748760_1_TS.jpg)
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R
Good stuff, but expensive
When the Side Stand is applied, it is extremely tilted to Left for some reason I bought it because I felt uncomfortable that I didn't feel like I was standing on a stand, I had a good sense of security and accuracy, but it was a bit more Smaller looking is better looking View detail
It didn't work
use it for the Short Side Stand of ninja250 KIJIMA's Lowdown Kit When I tried to use it, I couldn't use it because the leg of SIDE was too small
View detail
Things are nice, but …
The thickness of the STAND grounding part and the concave part of Bracket are the same Some of the clasps don't fit, and the clasp floats & hellip;
I raised and lowered the STAND a few times to see if it was loose, and then used it a couple of times and it didn't come loose LargeI think it's sturdy, but if you're worried about it, you might want to get something else
View detail
Fits: BMW F800S, BMW F800R, BMW F800ST, BMW F800S, BMW F800R, BMW F800ST
Although the precision of the work of the product is outstanding ...
It installed in F800ST.
The accuracy of the product's fabrication is wonderful.
On the other hand, the installation Side Stand was for casting? It was decided not to put on a pin but to scrape with File. Also, when paying STAND, the contact surface collapses because it hits Exhaust pipe. (This is also the product of Tulare TEC)
View detail
![Stand Height Bracket [Kickstand Shoe]](https://global.webike-cdn.net/photo/impression/08/08f3ff1961a04eb3782d4ee36a613192L.jpg)
Fits: DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Scrambler Classic, DUCATI Scrambler Classic, DUCATI Scrambler Classic, DUCATI Scrambler Icon, DUCATI Scrambler Icon, DUCATI Scrambler Icon
The angle at parking is standing and it is a nice feeling.
When parking in the side of the road, if the road is a kamaboko type,
The car body as compared to placing it in a horizontal place (Sleeping too much) I will.
When this product is installed, Side Stand becomes about 5 mm longer
A little angle of Motorcycle will occur.
Although it is just a little change, I feel like I can easily raise a single car.
However, I knew it after purchasing, but similar products are on sale in other Manufacturers,
Especially what made by TOURATECH is cool with DUCATI with Logo.
I hope that it will help prevent snagging on lawn such as Camping place.
View detail
![Stand Height Bracket [Kickstand Shoe]](https://global.webike-cdn.net/photo/impression/75/755816f05d115d98791627f2b7b00f57L.jpg)
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
The mounting accuracy is bad
GSX 1300 R HAYABUSA has a large slope when stopping at Side Stand, so weigh down when raising
I bought it in the summer to prevent STAND from getting into Asphalt.
Mounting is essentially just fitting and tightening 3 Screws.
However, unfortunately it is not possible to enter either STAND or product.
I deleted STAND with Grinder.
Since the depth is small and the STAND does not run even after cutting it, it is impossible to put on the top covering?.
You can not install it unless you cut the depth of the product or cut the back of the STAND to thin it.
I built my own Spacer in between.
Another Bolt was necessary because the Bolt's Length is insufficient with Spacer's thickness.
It may be different depending on the type of car, but I did not buy it if I knew that it was necessary to process this much.
If you are not confident in machining tools or machining, I think that you should ask Shop for installation.
Nice place
- You do not have to take things to lay under STAND in the summer.
- Since the STAND becomes longer by about 5 mm, it is easier to wake it from the time of stopping.
A bad place
- The mounting accuracy is very bad..
- Price is too high.
Others
- For vehicles that are Lowdown by footbed countermeasure, STAND is about 5 mm but it gets longer.
- If there is an Exhaust System on the side where the Side Stand is located there is a possibility of contact during storage.
- It takes a car weight and contacts the ground so it's a bit sad to be scratched (Lol)
View detail
Quite
It is quite solid making.
Previously I used a board, but there is a fear of breaking,
I bought this product.
The back is uneven and it is a slip prevention.
Hold STAND firmly.
Since the color is noticeable with red, it seems to be a prevention of forgetting after use.
View detail
STAND
I bought it for unused and parking use,
Until now, I used something that crushed empty cans,
I used a thin wooden plate,
I searched for good things because it seemed quite obvious.
View detail
Fits: BMW R1250RT, BMW R1250RT, BMW R1200RT LC water-cooled
I felt a sense of stability when I stopped..
Installation Instruction Manual also instructed us to use "Screw lock", but since we did not have any hands, we installed it for the time being. When I noticed the installation Screw was dropped by 1 pc.
I bought Screw lock agent and Stainless Steel dish, Screw at Homsen and reinstalled it. Engine is easy to loosen because there is vibration in BoxerTWIN.
Out on the upper side of the photo is the self-made extended Bracket. The position of STAND is in front of Cylinder, so I tried to attach it because it is hard to get on with my feet.
Since the area became wider, it is stable, but I wonder if I need to pay attention to the pull and pull on the road surface.
View detail
It attaches to a STAND, the hole of business is made, and goods are fixed with a Screw. Since this work had tools, such as a Drill, it was good, but since [ mere ] it was somewhat narrow, between the nails of a tip attachment part did not enter
It attaches to a STAND, the hole of business is made, and goods are fixed with a Screw.
Since this work had tools, such as a Drill, it was good, but since [ mere ] it was somewhat narrow, between the nails of a tip attachment part did not enter.
It was wearing which deletes between [ a little ] the
nails.
View detail
Since the back step of over was purchased, it purchased here. It did not investigate well, but since it purchased, it failed, but it is carried out very well firmly, and if the price of structure is to a slight degree cheap, it is recommended very muc
Since the back step of over was purchased, it purchased here.
It did not investigate well, but since it purchased, it failed, but it is carried out very well firmly, and if the price of structure is to a slight degree cheap, it is recommended very much.
The failure story is written to the diary.
View detail