Reviews
… Failure.
It is not attached to the '23 model because of a model type mistake.
I gave it to a friend.
View detail
big
Slightly protruding? In the event of a fall
LargeDurable?
View detail
Good
The price is a little high, but it has good footing.
STAND is hard, which helps.
View detail
Fits: HARLEY-DAVIDSON XL1200CX, HARLEY-DAVIDSON XL1200N, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL1200T, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200XS, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL883N
XL1200XS
I wonder if it's easier to get STAND in and out. View detail
Fits: HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF250L
Satisfied
Very good. Didn't have a problem with the bad location. View detail
Side Stand Extension
Looks great! So cool!
The OEM Product is a drill and requires drilling, so this is the one I chose.
The bank angle I was worried about was also covered from the top.
It's fixed Screw, so it's no different than NORMAL.
FLHTKSE will be Full banked.
Side Stand because the front side of the root is shaved off.
It does not matter at all if this product is installed
However, a lower price would be ◎.
At this price, a small Hexagonal Wrench for tightening screws
I thought it came with it.
View detail
Wide Plate
I put it on for stability in the sand.
It is heavy but nice.
We wanted to unify the color with Black, so we painted it.
View detail
It could not be installed as it was.
I used a grinder to grind the stainless plate. View detail
Fits: YAMAHA serow250 s, YAMAHA SEROW250
It seems to be able to park safely even in the forest road touring.
I decided to buy it because the ground was too soft and the stand was about to fall down when I took the Side Stand out and parked without thinking when I took a break on a forest road touring.
I used a maintenance stand to install it, if you don't have a maintenance stand you can ask a friend to help you set the car up.
The work itself is easy, but because the screw of Two Extension was coated with something like a dropout prevention agent, I coated the screw lock to prevent the dropout of the outside screw and installed it.
While I was using it several times, I felt uncomfortable at the time of putting in and out of STAND because Two Extension was heavy and it seemed to flap when it was a forest road, and I was putting in and out using the middle of STAND, so I changed it to stop short Screw with Lock nut.
View detail
Fits: YAMAHA serow250 s, YAMAHA SEROW250
Durability is a problem.
The Horn (Two Extensions) for kicking up the bike is Large and easy to use, but the Two Extensions came off after a year or so. I don't know why, I had it installed at a motorcycle shop, but the bolt is not the same as the material:It seems to be Aluminum. It is unbelievable that they use the aluminum bolt for the part that the stress is applied at every kick-up and kick-down. It is the Level of the old China product. The price is too high. The bottom plate is also Material:I don't think it has to be Aluminum. Because they are Parts that attach to Steel's OEMSide Stand. View detail
Fits: HONDA CRF1100L Africa Twin, HONDA CRF1100L AFRICA TWIN Adventure Sports
Due to the structure, the FootAssist Bar? part comes loose and comes off immediately.
The foot bar part may not have a good weight balance due to its structure, or it may be loosened and dislodged easily by the vibration of driving.
It came loose three times in 2000km, once came off and was warned by a following car. In the end, despite the fact that I warned him to tighten it up with Screw Lock, it came off somewhere and went missing! It is very dangerous if it comes off while driving at high speed, etc. Manufacturer's reply is required.
View detail
Fits: HARLEY-DAVIDSON XL1200R, HARLEY-DAVIDSON XL883, HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL883, HARLEY-DAVIDSON XL883R
XL883R.
It is installed in '06 DXL883R. But when it tries to install with 2006 type XL883R, the hole diameter is Small size, the processing which makes the hole diameter Large was necessary.
will make it easier to get in and out of STAND.
View detail
It is not bad
I have a Motorcycle in my yard, but the ground is dirt, so it's unstable when it rains.
So I bought this one and installed it in a position to put the Side Stand in.
I think the strength is high for being light. The disadvantage is that it is difficult to find in the dark when it is black, and because it is light, it is sometimes blown away in the strong wind.
Other than that, I have no complaints and I am still using it.
View detail
It's solid and secure!
This is a Fashionable and Comical Plate
Compared to other companies' products, the backside of this product has a non-slip finish
It's safe to use!
View detail
In a nice way price
Previously used P & A International Peitzmeier Company : Side Stand Helper is a structure that sculls the bar into the base, and it broke from the base of Screw.
This is one, so it will not break.
Better than you can see in the picture.
However, expensive.
View detail
Fits: HARLEY-DAVIDSON FLST HERITAGE SOFTAIL, HARLEY-DAVIDSON FLST HERITAGE SOFTAIL
It arrived today and attached instantly. Although the attachment was also easy and was operated ranging over its own car, more than it considered, a STAND stands simply and it was easy to carry out - payment. A fear of becoming hollow of standing
It arrived today and attached instantly.
Although the attachment was also easy and was operated ranging over its own car, more than it considered, a STAND stands simply and it was easy to carry out - payment.
A fear of becoming hollow of standing now is not needed, either.
View detail
Although it was not easy to become obstructive, the diameter of attachment of die length of a hook with a stand did not suit, but it rolled the rubber sheet and corresponded. From the start, if I mean to, a rubber sheet should also be attached by atta
Although it was not easy to become obstructive, the diameter of attachment of die length of a hook with a stand did not suit, but it rolled the rubber sheet and corresponded.
From the start, if I mean to, a rubber sheet should also be attached by attachment.
View detail