Reviews
Red.
It is used for HORNET600.
Because the body is red and the engine is black, I chose red as one point.
The color is Anodized and is beautiful.
It doesn't look like this is the Guard, so it's less assertive and casual.
View detail
Good feeling ♪
I am wearing BANDIT 1250 SF.
Because it has a heavy weight Motorcycle so I put on the meaning of insurance and I am wearing it from car delivery.
I liked the shape the most compared to those of other companies.
I can choose the color of the installation Pad and I think that it is convenient because only Pad can be changed ♪
I think that it is also high with weight and solid texture.
However, since I think that it is Engine Guard's side rather than protecting all of Cowl, those who seek defense may need to use it in combination with other things.
It became a good point of my car ♪
I will just try not to take care of me (Lol)
View detail
Helpful
I got stood up.. Maybe because I was right beside Motorcycle, it may be because I was supported a little, but I did not have one scratch on the car body. I think it depends on how to fall but there is an effect.
The plastic part was scraped even with light standing, and it felt surprisingly fragile. However, because only Plastic can be exchanged, it is economical.
Design is not too conspicuous, I think it is cool.
View detail
I am saved !!
Other than this product, it will not hurt, so even replacing it is ok. It is good that the area of ??shock absorption is wide!
I think that Design is also the best. I am saving because the price of this is not high.
View detail
In the state where it does not understand what happened reluctantly rather than a GEAR fell out in the case of left-turn dispatch, and it became a Neutral and having pushed down.When seen in fear, the crack went into the portion of the end of a Muffler th
In the state where it does not understand what happened reluctantly rather than a GEAR fell out in the case of left-turn dispatch, and it became a Neutral and having pushed down.When seen in fear, the crack went into the portion of the end of a Muffler the Crash pad and the direction under a Cowl, but LSL can be managed with damage only the parts of a Plastic.It is the highest that it is OK in exchange of only the part! A price is also cheap and it was saved very much! View detail
carrying out right [ of the Design ], if it reaches in search of an Engine slider variously -- also throwing away -- it was easy.It was good to purchase a LSL Mounting kit.Because a kana ? SLIDER50 Head is merely an option a useless place only with this p
carrying out right [ of the Design ], if it reaches in search of an Engine slider variously -- also throwing away -- it was easy.It was good to purchase a LSL Mounting kit.Because a kana ? SLIDER50 Head is merely an option a useless place only with this product A head single article has the high amount of money! Or [ that it is more satisfactory if it is attached and is this price to a Head ]! View detail
[Webike Monitor] It attached to YZF-R125. On the occasion of attachment, the Stay was needed separately, and I attached to the base of the Roller SLIDER50 of Yamaha Europe. It is delightful limitations that at least type is smart and
[Webike Monitor] It attached to
YZF-R125.
On the occasion of
attachment, the Stay was needed separately, and I attached to the base of the Roller SLIDER50 of Yamaha Europe.
It is delightful limitations that at least
type is smart and that color can also be chosen.
It is Point size that a Fashion can be enjoyed, although it is a Guard Sliders for
safety! The size of the hole of the
SLIDER50 was M10, and the depth was about 15 mm.
Since the Protector base for R125 mentioned above is a size of M8, it makes M8-M10 Spacer blow and it has attached it.
Since others [ photograph / after
attachment ] are also carried, I would like to carry the photograph at the time of decomposition.
It hopes to like to come to buy the direction which looked at this.
View detail
[Webike Monitor] A fall is purchased as look before you leap on the Motorcycle for an accessory. Hemispherical foundations are considered to be a product made from an Aluminum, and Anodized finishing. It is a black plastic part to co
[Webike Monitor] A fall is purchased as look before you leap on the
Motorcycle for an accessory.
Hemispherical foundations are considered to be a product made from an Aluminum, and Anodized finishing.
It is a black plastic part to contact a ground surface at the time of a fall.
Unlike a SLIDER50 besides
, since the plastic part is small, impact-absorbing power may be weak, but color play can be performed.
Although safely united with the color of the Frame this time ...
I think that it is a big charm that color play can be performed if it is the purpose with which emergency is equipped by a Street youth at any rate if the
fall is a premised Race use.
View detail
FZS1000 is equipped. The Stay for Crash-pad wearing of the Manufacturer. It fixes in the form where the Bolt which fixes the Engine lower part and a Frame is exchanged. When exchanging every [ single-sided ], there was also no special tool and it was e
FZS1000 is equipped.
The Stay for Crash-pad wearing of the Manufacturer.
It fixes in the form where the Bolt which fixes the Engine lower part and a Frame is exchanged.
When exchanging every [ single-sided ], there was also no special tool and it was exchangeable.
After
wearing, although it had fallen, the car body was guarded firmly and the Frame Engine was safe.
View detail
It attached for FZS1000.It was not truly touch called a Guard, and appearance was also comfortable and was good.There was also much Variation in color and it was able to choose the color which suited its own Motorcycle.Although it fell after attachmen
It attached for FZS1000.It was not truly touch called a Guard, and appearance was also comfortable and was good.There was also much Variation in color and it was able to choose the color which suited its own Motorcycle.Although it fell after
attachment, that the crack was attached protected the car body firmly only in the portion of resin.Since the portion of the resin Parts which got damaged also had a Repair parts, it was good to correct with a sufficient Cost performance.
View detail
Since it was written that it could be equipped by bolt on, I purchased. If I have one set, it is heavy, but I think it would be ok if it becomes insurance for the time being. However, I considered whether it is ok or not that the bolts attached to an engi
Since it was written that it could be equipped by bolt on, I purchased. If I have one set, it is heavy, but I think it would be ok if it becomes insurance for the time being. However, I considered whether it is ok or not that the bolts attached to an engine is a stainless. View detail
It chose by the low price of appearance and a price. Since it is not necessary to make a hole in a cowl and also and the whole design is not broken down and also color was also chosen, it chose. Since it has not actually fallen, the degree of an e
It chose by the low price of appearance and a price.
Since it is not necessary to make a hole in a cowl and also and the whole design is not broken down and also color was also chosen, it chose.
Since it has not actually fallen, the degree of an effect is not understood, but the damage by light fall is likely to be mitigable.
View detail
Since it attached by bolt on even if it did not process it into a cowl, it opted for purchase. It has attached in about 30 minutes. Since mounting was short anxious about die length at the time of a fall, another thing was merely attached. An
Since it attached by bolt on even if it did not process it into a cowl, it opted for purchase.
It has attached in about 30 minutes.
Since mounting was short anxious about die length at the time of a fall, another thing was merely attached.
An attachment bolt. Pains were taken to search by M10 and P= 1.25.
View detail
Although attachment is easy, when not processing a cowl, it goes a spacer into some bolts, but it is slightly troublesome. Since it has not become hollow yet after attaching, since the degree of an effect is not understood yet, it is evaluated in the
Although attachment is easy, when not processing a cowl, it goes a spacer into some bolts, but it is slightly troublesome.
Since it has not become hollow yet after attaching, since the degree of an effect is not understood yet, it is evaluated in the star 3.
View detail
Fits: YAMAHA FAZER8, YAMAHA FZ1 (RN16), YAMAHA FZ8, YAMAHA fz1 fazer(rn17n) [feather].
LSL liked the design and had also equipped with the crash pat of LSL the motorcycle which had ridden before. And a pat part will use after a change as it is, and it purchases only a mounting kit. An attachment part removes the bolt of the frame wh
LSL liked the design and had also equipped with the crash pat of LSL the motorcycle which had ridden before.
And a pat part will use after a change as it is, and it purchases only a mounting kit.
An attachment part removes the bolt of the frame which is fixing the engine, and attaches it there.
Since it has not fallen, the degree of an effect is not actually understood, but it stands, and if it is a GOKE grade, I feel that it is likely to stop at worst for the damage to a cowl etc.
But since it can be made the mounting [ itself ] thinness, there is no telling whether it can deal with a how far strong impact, and I feel that its frame is hurt depending on the method of a fall.
I think that it is better whether to attach and carry out by Kami who was ready for the neighborhood.
View detail
Since a cowl cut's being carried out and the design were good although he tried to buy the product made from a moriwaki, LSL was used. It is attached especially comfortable.
Since a cowl cut's being carried out and the design were good although he tried to buy the product made from a moriwaki, LSL was used.
It is attached especially comfortable.
View detail
Since it was Rider short in stature, since it was a very big car body for me, GSR400 left and I attached it together supposing GOKE at the time of motorcycle purchase. First, appearance is also comfortable and completely matches the motorcycle. Si
Since it was Rider short in stature, since it was a very big car body for me, GSR400 left and I attached it together supposing GOKE at the time of motorcycle purchase.
First, appearance is also comfortable and completely matches the motorcycle.
Since I putted together with the body color, I am seldom conspicuous, either and pleased.
Since the motorcycle has been toppled about the engine performance recently, that time is reported.
When said at a word, I attached and thought the correct answer.
By the favor of this, a conspicuous big wound etc. go into neither an engine cover nor a car body, but I appreciate this product.
It is better to attach the direction which is wavering purchase, before pushing down since a wound etc. will consider being attached by them to a cover etc. if a car body is probably pushed down in the case of GSR.
I think that it is worth attaching if the amount of money can also come.
View detail
The design of a slider is wonderfully good and it is not visible to a guard apparently. However, the bolt which follows is likely to lick a hex hole by YAWA. Then, the thing of the same standard practice was purchased and attached in the bolt spec
The design of a slider is wonderfully good and it is not visible to a guard apparently.
However, the bolt which follows is likely to lick a hex hole by YAWA.
Then, the thing of the same standard practice was purchased and attached in the bolt specialty store.
When it fell with it, in spite of having been a remarkable low speed, the mount part of aluminum twisted off and kept (break ?).
It was the impression that it might be what may be more solid in reinforcement.
Therefore, the merit of the design was used in three stars by offset.
View detail