Reviews
Cowl drilling required
I ride a CBR600RR (2009).
I purchased this product because I was told it was compatible, but I could not install it without drilling out the cowl.
Fortunately, I did not have to drill holes by diverting the Slider Bracket that I had originally used, but of course I had to choose and purchase the Bolt myself since I could not use Included Parts:.
If you purchase the product, you should be prepared to drill holes in the Cowl.
View detail
Hopefully there won't be a time when it will be useful.
It is easy to install, but I wonder if it is because the Engine is a hanging type.
Quantity:Pair (for Left and Right) The Bolt to be installed after either 0Comma or 0.5Comma. About the same as
It was hard to get in, but after a couple of hang-hangs (without force) with the plastic pan, I was able to get in.
I got in easily, although it might be right to make it stand upright and jack-up?
View detail
I will not buy it again
The Bolt that came with it was shoddy and broke during installation.
not worth talking about at all
View detail
Lowest
The length of the bolt in the Included Parts:section is not correct and cannot be installed as it is. This may be the case with parts made overseas and installed on a foreign car, but we are honestly disappointed with the condition of the parts despite the long time it took to receive them. View detail
Also comes with SV650S
I installed this bolt on a 2005 SV650S. the bolt on the Right Side was not long enough, so I prepared a separate M10×140 fine cap bolt. (Would 1,000 be enough?) The construction is good and Parenthesis is good. It seems to be strong enough to prevent standing up and falling. I would have preferred to use a torque wrench for installation, but the bolt head was too deep and there was no extension, so I tightened it by hand. The price is a little expensive, but I think it is not too expensive because it is more elaborate than just a lump of DURACON. View detail
![Crash protector[Crash protectors]](https://img.webike-cdn.net/catalogue/images/41365/K44-PH01_pict_1492695008233527_web_TS.jpg)
NINJA650 2020 MODEL
I was able to install it on my NINJA650 2020 MODEL. View detail
It is easy to install.。
I installed it in case of a fall from standing. It is a good and inexpensive product. View detail
RefreshingSlider.
It's a useful part in case of a fall, so it hasn't been used yet. It is easy to install, but the OEM screw is Long bolt + Nut, while the supplied screw is Long screw with both ends cut off. the Nut and the screw turned together and did not stop at the right place.
I had a Bar type Engine Guard on my previous motorcycle (VFR800xMugen), but I decided to use this type this time because I thought it would be less likely to roll over due to the light weight of the Vst650. I had been using the Bar type Engine Guard for a long time, but this time I decided to use this type. Bar type is obviously better for protection, but I am satisfied with light weight & compact.
Because it was imported from Czech, the delivery date was initially one month, and was extended twice due to Corona, so I waited almost three months, but I am glad that it arrived safely.
View detail
It's solid
It feels solid when mounted. It seems to protect the Radiator when it is knocked over. View detail
Product is good, but there is a problem with installation
The instruction manual for the installation was in a foreign language (English version?) and I couldn't understand it at all, even though I used a translation application.
Also, the pictures in the Instruction Manual were not helpful at all because they were of a different car model even though I specified the car model.
The bolts that came with the car were not very good quality and I had to buy them myself to install the car.
View detail
Good for a cheap price!
Although there is a similar commodity in FOR JAPAN MODELManufacturer, I choose this cheap one.
I've been waiting for Large minutes as announced, you need to be prepared for 1-2 months.
I have no problem with the texture at all, it's a good Slider.
However, I installed it on my 2020 SV650X and the strut was a bit long, so I had to bite the Spacer.
Is it just my unit? I deducted a point for that.
The installation is co-tightened, so you will need two hexes.
View detail
KIT parts cannot be fixed alone.
It was a ridiculously defective product for a not-so-cheap price of $6458.
KIT parts alone cannot be fixed because the fixing bolt (M8) does not match the hole diameter (M10) of Shaft parts.
(There are too many gaps and rattling).
I thought about returning it, but that would be a pain in the ass, so I'll just add my own parts to it. 。
I bought an Aluminum Pipe (10mm OD, 8mm ID) at Home center and made a Spacer to fill the gap.
Added Washer so that Bolt's Torque can be applied without difficulty. 。
It's a shame, because it would have been a great product if I could have added the parts and installed it properly myself.
View detail
The parts were as expected with a more custom look and feel.
Because the Installation Manual was in English, I installed it by intuition with reference to the photos.
I think it takes about 30 minutes to install if you can read the manual.
We recommend that you install it as a walking stick to prevent yourself from falling.
View detail
Crash guard with the best costumes
The delivery time was a month or two after I placed my order, but it was worth the effort to purchase these very high quality parts. The instruction manual is very simple, but it includes pictures so you can install it intuitively. There was no problem with the installation and it was easy to install. I don't know how well it works because it's not mossy. It is not mossy and I don't know how effective it is, but I think it protects the Radiator. View detail
Just in case.
I bought it to reduce Damage when I was standing on my feet. The Instruction Manual is the English version, but the pictures are included so you can install it intuitively. It is a very simple and conspicuous installation. View detail
It's gone
I went touring for the first time after the installation, but one of them came off and was lost It's exactly as described in the Instruction Manual, and the BoltBody is still intact Only the black part of Rubber? View detail
ProductBody is zero, Included Parts:Bolts? No
ProductBody is 0 good, Included Parts:Bolts are ? No M10×60mm 1.25Pitch 2pcs M10×70mm 1 .25Pitch1 pc
M10× 75mm 1.25 Pitch 1 pc (Bolt to mount on vehicle) All 4 pcs Inaccurate, cannot be screwed in, Material:I bought the Stainless Steel at the nearby Screw shop By the way, it cost me 2013 yen for 4 pieces
View detail
![Crash Protectors [Crash Protectors]](https://img.webike-cdn.net/catalogue/images/41365/PHV2_pict_1497957675179929_web_TS.jpg)
not fit 2019 sv 650
The rod that came with is too long...i have to cut it short myself to fit...a lot of work and waste of time...not recommended unless they fix this. View detail
![CrashSlider[Crash sliders]](https://global.webike-cdn.net/photo/impression/18/18d2925496602437fd313d8a741bf5d7L.jpg)
I don't know how they work
I've fallen down so many times in the past that I have to put Slider on it! I bought it because I thought it was a good idea
When I received it, I found that the Instruction Manual is the English version and the rough image I was worried because it was the only one, but when I settled down to read it, I read it "Take off the Volt that's on your motorcycle and put this on Right It just said something along the lines of (Lol)
I tried to take off the Bolt, but it's really hard It takes a lot of strength And I have to hold the nut at the back when I put the Slider's Bolt on It was very difficult to do But the parts arrived as they arrive, so I did not hesitate
When I installed it somehow...it's very nice Parenthesis Well, it's just a hobby
I'll have to be careful not to run this guy's performance check
View detail
![Crash protector[Crash protectors]](https://global.webike-cdn.net/photo/impression/d8/d895a89199c8aebd1a744366f4f8f6b1L.jpg)
Almost satisfied
Purchased for the XSR700
Delivery date, scheduled for the end of January, was completed about a month after purchase
Installation was easy, but I was worried about the bolt tightening at the time of installation because it was a little hard, but it was installed with no problem available Also, a 10mm Hexagonal Wrench is required for mounting
The protection effect is unknown, but the Slider's overhang is less, and it is not a problem for Compact I think it's a Slider that's a good idea
It's cheaper than other products and comes in several colors, and you can choose the color you want
View detail