Reviews
Fits: SUZUKI gsx1100s katana (sword), SUZUKI gsx1100s katana (sword)
Slider installation
It is not cheap, but it has a good quality. After installation, I think the parenthesis has improved. I don't know how effective it is because I haven't rolled on it. The installation was done by one person, but it was a little difficult to tighten the wrench lever while pressing it down with my foot from the bottom because it is co-tightened from the Both Sides. View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Zephyr 400
Mounted on ZEPHYRX
The installation was easy, and the installation was done according to the instruction manual with the Torque indication. The engine looks quite large at first after installation, but I hope this will be enough to guard the engine. I will ride carefully so that I don't have to take care of this product. View detail
Highly rigid
The mount is solid and the slider is big enough to prevent tipping over. View detail
Mount slider ver.2
The product itself needlees to say, its solid and charming. Easy to install, looks cool. Gives protection to engine. Got whole set front, rear & engine mount. View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
For protection around Engine
It depends on how the pedal falls, but I think the Brake and Clutch pedals hit the ground first, so I thought it was too short to protect the Pedal.
I think it would be a good idea to install them with the feeling that it is better to have them.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Installed on a WR250R
Since I have Rear Sets installed, I installed them to reduce damage when the Footpeg breaks. View detail
Installed for '07 VTR250.
Design is good and I bought it for Style.
Although it is installation to VTR250, the hole through which Shaft passes under the front of Engine is Quantity:Pair (for Left and Right) I was able to install it easily because it is located in
However, as you can see in your impressions, you will need a socket wrench (better if you have a torque wrench too) and an extension bar for installation.
After installation, the engine area looks more powerful and I am satisfied.
I don't have to worry about it when driving, and I want to drive safely so that I don't have to take care of the Mounting Slider.
I bought it at a great price from webike sale, thank you very much.
View detail
as insurance
No problems with quality and installation.
The Slider became the support against the ground firmly, and Cowl etc. of the upper part of the body were unharmed though I accidentally did a standing fall on a slope.
I'm sure the results would be different if the speed was higher, but I think it does its job well.
View detail
High sense of quality and rigidity
The engine mounting bolt is removed and installed, but there is no need to support the engine. You don't need to support the engine.
The color is Black, but I think it is SMART and I personally don't feel uncomfortable with the body color.
The bracket part is also very rigid and has the right amount of lateral overhang.
Maybe there is no Damage on the Bracket part by the impact of a standing fall.
However, it is only a Slider, not an Engine Guard, so don't expect any more Guard functions than that.
I believe the Slider is intended to glide over the body of the vehicle in the event of a fall and prevent injuries where the Rider is caught in the body of the vehicle. The price is relatively low and it looks SMART.
Depending on the material and road conditions, the Engine Guard will also glide reasonably well. The price is relatively expensive, and the appearance also changes like Large.
The guards and sliders sticking out horizontally on the underside of the vehicle will cause the tire to float when the vehicle falls over, causing large damage to the upper part of the vehicle such as the handlebar and tank.
In the case of the VTR, when it falls, the RearSide cowl, footpeg, Handlebar End, and Lever will take the main damage, and if you are unlucky, the Headlight and Meter area will be hit hard.
View detail
How do I cancel an order?
I got an email that Engine slider for W201217A2231SR400 is out of stock from Manufacturer.
I cancelled my order, but I could not execute it from the web.
View detail
Understand the function of the product before you buy it.
The product itself was convincing in terms of quality and shape.
However, it later occurred to me that the Mounting Slider would be effective when I was driving on paved roads and falling over.
It doesn't seem to be that effective in off-road falls and standing up....
I wonder if I have installed something unnecessary for most of my falls on the latter. That said, I now think of it as ” insurance ” against falls on the pavement.
View detail
It's pretty good
It is very stylish and I am very happy with it But when installing Left Side, Bolt was a little short and had a hard time to tighten Because it has not rolled yet, it is unknown whether it is protected, but the engine of Black to the body of White I think it looks good because Parenthesis View detail
Hmm, well, that's about it …
I bought the antlionMounting Slider at We-Big in 2013 for the first time in years It's been a long, long way to this point, and it's been a hell of a ride
I simply couldn't install it using the DESSERTExhaust System Up Type Since the Down Type Exhaust System was replaced, it was possible to put it on Yes
Installation itself is easy, but you need a tool with a slightly longer neck, such as semiLong ratchetetc I can't install it properly. 14mm semi-long or longer seems to be two pieces of wood, so be careful You can buy long tools for a few hundred yen if you're not picky
Because it doubles as an engine mount with plus alpha, use screw lock agent It's about 200 yen for a small type
The appearance is as shown in the image, and we won't know how effective it is until it's mossy, but the Engine and Wouldn't it be a good buy if Tank could protect it?
DoAsInfinity~!
View detail
Fits: KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14)
Cospar good
It's easy to install and solid
I don't know how well I can protect Cowl as I haven't beaten him yet
But it's best not to use it!
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
footpeg hits before ? ? ?
Mounting on WR 250X
Engine slider does not hit when football is killed and footpeg and Rear brake hit first.
It will be after the Rear brake is twisted that it will function as Engine slider ? ? ?
Too bad I think that things look good
View detail
Although it is an amateur, it was easy to install.
I do not know the effect because it is not moss, but I think it is a pretty firm product.
I like it because it looks good as well.
I think that it is better to have Torque wrench for tightening.
(Torque Torque was stated in the Instruction Manual)
View detail
It does not suit the SR.
It's better than nothing, like insurance. Originally it's a thing to slide the car body out of Course. It seems to be effective if it is light standing gobble degree. Quantity 14 mm Socket for installation : 2pc. Set If you have one. I am 1pc. I only had 14mm and 17mmNut installed.
View detail
It is not moss yet - -
I was wearing Engine Guard.
Although I was slightly surprised at Large
I feel comfortable when I try to install it.
Installation was easy..
It is not moss yet, but it seems to keep firmly around the engine !!
View detail
Perfectly!
It's SEROWFI, but it's unbelievable, it came in in no time. It might be a pain if you do not have a long socket - - -
Wise GEARUnder Guard (Resin Type) And does not interfere with Power Beam!
View detail
Individual difference? Is it a mistake of conformity check?
Purchase a car type setting as insurance when falling down here.
Because it is Brand which passed by name, making is perfect.
However, is it an individual difference of a vehicle? Since Oru line from FrameOil tank interfereed with Color and could not be attached, we cut a little with Belt sander.
Since it is an instruction to install at the position of the image in the Instruction Manual, I thought about the strength and thought it was not attached to the Frame side, but Air tooletc. If I do not have it, I think cutting work is Large strange.
Also, at this position, will you oppress the Oil line when the Slider bends when falling? It's a bit uneasy.
If you are told if you can recommend it "Neither" Is my opinion.
View detail