Reviews
Fits: KAWASAKI Ninja H2 SX SE, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX SE+(ZX1002DKF), KAWASAKI Ninja H2 SX SE+, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SX SE
Easy to install
The instruction manual is easy to read and even beginners can easily install the system.
Torque wrench is required, so I'm not sure I'd want to not have it.
View detail
Z900rs Slider
Cant go wrong with original slider from KAWA, especially the nut size. reason i chose these is due to 2 screw in point, many slider are just cyclinder whereas this are indeed call the real slider which it slides ! View detail
Fits: KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-25R
A little expensive, but satisfied with the design.
This is an OEMSlider. I painted the Cover to look like Champagne gold by myself. I don't want to know how it works. (Lol) View detail
Fits: KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-25R
Effective in street tipping.
It is SEStandard Equipment, so it is a well-designed product.
Kawasaki's Logo is also a great Parenthesis!
I fell down with a speed of about 20 km/h in the city.
The Slider was scuffed to shreds, but the Cowl was only lightly scuffed and did not crack.
Unclear on Circuit, but I feel it is strong enough to be a street fall over, but it is overpriced.
The price of the One Side replacement and the external SliderBoth Sides are the same, so if you are replacing or buying from now on, you can use the external Slider, which is more versatile in terms of design.
View detail
What about the appearance of the house?
I've never worn a Slideretc. on my Motorcycle before. "KAWASAKI" I love it and put it on! (I really wanted to buy the over but it was too expensive …)
If I knock it over, it will probably get scratches because of the protrusion and material. But that's okay, because I'm focusing on appearance (????).
View detail
With Single Body!
ReturnRider!
I am an old man.
Several times ??? standing moss ( T_T)
Thanks to this Slider, I can now use the
The upper cowl is no Wound.
The lower portion will have some Wound on it.
I'm going to break in the exterior, so ?? ? ?
I'm thinking it's time to Custom.
Purchased for Renewal.
If possible, only the resin part where the Wound is attached.
I'd like to buy it, but I'm not sure if it's a Full set or
The price is almost the same as the ∴∵
Mr. KAWASAKI, please~! (???) 〜tilde
With OEM Product, this performance and forme
I think it's a good job.
The only thing is the price?\_ (?_??) _/¯
View detail
Kawasaki crash bars
Wery Nice and Easy installation good products :-). Sending was a little late for some reason, but when it came time to ship, the package arrived quickly delivered to your door. View detail
It's neither good nor bad
Large number of parts.
It takes a long time to look at the Instruction Manual and quickly install it.
View detail
Fits: KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-25R
Garbage, maybe.
DURACON was broken as a result of being pushed and collapsed by another car while parked.
Even if only DURACON is replaced, the cost of parts alone is about 7,000 yen on the One Side.
If you are not a Kawasaki OEM believer, I would recommend other companies' products.
View detail
Design that compliments the looks of my bike while keeping it safe from scratches.
It is an OEM product from Kawasaki so it is really of good quality. Although it may look modern in design, it still compliments the look of the Z900RS. It also feels sturdy, it will surely protect the bike from minor crash. Also good service from Webike, I received the item in 5 days. View detail
Z900RS Slider review
First time experienced buying from WEBIKE, must say, i will surely return for more stuffs. Would not know how extensive protection it will give, however, in my personal opinion, the edge of slider feels flimsy (have relook at the installation 3 times to make sure i install it correctly), unlike those slider offer by R&G or SW MOTECH which is as hard solid. Perhaps its to cushion the impact. Main reason i get it was because it was by Kawasaki, hence am very sure they have tested the product to withstand certain impact since no crash are the same. I got it mainly in case i drop my bike while pushing, as in any impact accidents, i doubt any of these slider is able to protect unless one gets a crash bar which give better protection over slider, but than the aesthetic look with carsh bar will marred the beauty of these bikes. View detail
Fits: KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-25R
KawasakiOEMAttachment
I think it's safer to wear it.
OEMAttachment is a good way to unify with Motorcycle.
I haven't rolled it yet, so I don't know how it functions.
Recommendation
View detail
OEMSlider
Anyway, I added OEMSlider.
I hope you never have to use it.
I think you can get away with installing it if you have a SuKill to remove Cowl.
Jack is better to have. The panda in the car is enough.
View detail
I feel more secure.
It was installed as a precaution against standing moss.
It's a good thing there is an After that Parts can be taken one at a time.
It is a product that I am anxious to think that this is a sturdy Large product, but I put it on for the time being because there was a person who was saved by this.
View detail
Fits: KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-25R
OEM Product.
Included in the Ninja ZX-25R SE KRT EDITION from the start
If you're not an SE, you might want to choose this as an Option.
I'm sure Slider will be released in abundance from ThirdParty, so
I'll have to wait and see if that's the case.
I think the OEM Product Dasein Balance is very good and I do recommend it!
View detail
We're OEM, so you can rest assured that you're in good hands.
I installed it right after the changeover.
I also did the installation myself.
It was the first time I removed the Cowl, so it was Large strange, but the installation itself was easy to do.
It's OEM, so it looks neat and secure.
View detail
The lower part of the Engine will be grounded
I thought it was OEM, so I bought it I wanted to know how much protection effect it has, so I asked my friend to help me I gently knocked over the Motorcycle
The result is not good Even if you have a mossy finish, the Engine may have Wound or broken footpegs It is not possible to float the Engine as reliably as the Engine Guard It doesn't seem to be possible
View detail
Performance unknown, but...
We don't know the Performance because we haven't even stood up yet
There is a sense of security from having and OEM
I hope I never have to make use of it.
View detail
Fits: KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Z650, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650 KRT EDITION
Frame slider for KAWASAKI NINJA 650
닌자 650 프레임 슬라이더 순정품으로 구입했습니다. 색깔도 예쁘고 화려한 중국산 제품들도 많이 있었지만, 그래도 제조사에서 제작한 순정품이 좀 더 믿음이 가고 무언가 이유를 가지고 디자인 하지 않았을까하는 생각에 좀 비싸더라도 순정품으로 택했습니다. 장착후 시승후기 다시 올리겠습니다. Ninja 650 frame slider purchased as genuine. There was a lot of beautiful and brilliant Chinese products in color, but I still chose genuine products made by the manufacturer as genuine even though it was a little expensive and I thought that I would not have designed something with some reason. After mounting, I will raise the test time again. translated by Google Translator View detail
I recommend the Kawasaki Genuine Frame Slider.
I recommend the Kawasaki Genuine Frame Slider. The price is also low. You can buy it for around 200,000 won including shipping. I use a genuine product, but it gives me peace of mind, but it's shorter than I thought... Kawasaki Akira Makoto frame slider is recommended. The price is also very low. I bought a brand-new genuine product. It's shorter than I thought ... I wish I could be a little longer. I wish it was a little longer View detail