Reviews
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZrX1200ZrX1200 DAEG
ZRX1200DAEG is equipped. It attached by the insurance at the time of a fall by no means. He is an engine guard. Another vehicles also have a wearing history and have reliance. A result is good and he likes a design. Attachment is also
ZRX1200DAEG is equipped.
It attached by the insurance at the time of a fall by no means.
He is an engine guard.
Another vehicles also have a wearing history and have reliance.
A result is good and he likes a design.
Attachment is also easy, and it is OK if there are a ratchet wrench and a spanner.
The mounting arrangement appears also in the instruction manual in detail.
Although only the point that the clearance of a left-hand side pad and an engine part is narrow is worrisome, since it is specification, it is likely to be satisfactory.
ZRX1100, 1200, and DAEG are made to serve a double purpose.
View detail
Fits: DUCATI STREETFIGHTER848, DUCATI 848, DUCATI 848EVO, DUCATI 848EVO, DUCATI 1198, DUCATI 1198, DUCATI 1198S, DUCATI 1198S, DUCATI 1198R, DUCATI 1098, DUCATI 1098S, DUCATI 1098R
DUCATI: Equip a street fighter. This product is absurdly inexpensive!!! Although it has fallen twice to me and an ashamed thing in fact, it has not resulted carefully by the favor of this slider. With [ when there is this / no ] no being [ it / in
DUCATI: Equip a street fighter.
This product is absurdly inexpensive!!! Although it has fallen twice to me and an ashamed thing in fact, it has not resulted carefully by the favor of this slider.
With [ when there is this / no ] no being [ it / in the state with Yukichi required for triple figures in which a frame gets damaged ] mistake.
.
.
Since aftermarket parts are also solid, it is a duracon of one side, and bolt exchange, and it is 3 or 200 yen.
Bending will be able to be managed for 200 yen, if it is a little fall since it is only a bolt rightly.
When you buy it, it is a little painful, but if it thinks in the future, he has no mistake absolutely!! Attachment is exchanged for the shaft of an engine mount.
Although an engine does not fall only by extracting this, it is safe, if it can do and the engine will be supported with the jack etc. from the bottom as insurance.
View detail
![[IDEAL] Frame / Engine Slider](https://global.webike-cdn.net/photo/article/24/1295151593724L.jpg)
I think that texture and a design (especially a logo is liking) are good. Attachment is easy. When unpaired, even when he had no jack, the engine did not fall by 1 mm. However, torque management of bolting is an indispensable matter because a
I think that texture and a design (especially a logo is liking) are good.
Attachment is easy.
When unpaired, even when he had no jack, the engine did not fall by 1 mm.
However, torque management of bolting is an indispensable matter because a portion [ a portion ]! Those who consider attachment in person need a torque wrench.
Since a function is unknown for the moment (forever [ if it can do ] ...), let it be a three stars.
View detail
If a frame slider system of this sort carries out a slip down, it is known for destroying a support part and making it a vehicles total hull loss. The motion in which the slider which has projected digs up a support part by the principle of the lever
If a frame slider system of this sort carries out a slip down, it is known for destroying a support part and making it a vehicles total hull loss.
The motion in which the slider which has projected digs up a support part by the principle of the lever is carried out, and a cause puts a crack into an engine mount part or a frame, or a thread part is twisted, and a slider is caught in a wind strange between a frame and a road surface, and it dents a frame.
However, this slider made from an agras for B-KING has two support parts.
Therefore, it can be expected that the power of the motion which comes off is distributed by two places.
Even if it carries out the caught motion, it can be expected that the foundation of aluminum protects.
It has been the overhang condition of the range exactly good for standing, of course and protecting sheathing from GOKE.
View detail
why quantity is not like this -- it considered before ?? and purchase. after buying it, when a thing is seen, it is still high too by the impression of being made very well heavily heavily -- I thought --. However, although it is such a skid pad,
why quantity is not like this -- it considered before ?? and purchase.
after buying it, when a thing is seen, it is still high too by the impression of being made very well heavily heavily -- I thought --.
However, although it is such a skid pad, it has passed to the role on the attached next day.
Although it stood and was GOKE, it was the touch which the end of a brake lever calls a wound, a muffler calls a wound, and a little skid pads [ some of ] call a wound.
Probably, the wound was certainly contained in the tank, if there was no skid pad.
The deep socket wrench was required for attachment.
View detail
it stands and is the happiness now which is the insurance of GOKE (smile) -- the effect is not realized. The volume is and is pleasing than expected!! It is GOOD! by the insurance + dress-up effect up.
it stands and is the happiness now which is the insurance of GOKE (smile) -- the effect is not realized.
The volume is and is pleasing than expected!! It is GOOD! by the insurance + dress-up effect up.
View detail
![[IDEAL] Frame Slider](https://img.webike-cdn.net/catalogue/11500/006-sk008_TS.jpg)
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1100
it sideslips, and can stand and draw through -- etc. -- crack prevention and a design are favorite well. It attaches, there is also no crack of vehicles and it is glad with dramatically helpful components.
it sideslips, and can stand and draw through -- etc. -- crack prevention and a design are favorite well.
It attaches, there is also no crack of vehicles and it is glad with dramatically helpful components.
View detail
Fits: KAWASAKI D Tracker 125, KAWASAKI KLX125, KAWASAKI D Tracker 125, KAWASAKI KLX125
The D-trucker 125 was equipped with the machine protector. It equipped with these goods in order a short wife may ride, stood, and to have reduced the damage to a car body since GOKE is anxious although a design is not unsatisfactorily pleasing indivi
The D-trucker 125 was equipped with the machine protector.
It equipped with these goods in order a short wife may ride, stood, and to have reduced the damage to a car body since GOKE is anxious although a design is not unsatisfactorily pleasing individually.
Although it is No. 1 that there is no degree of an effect from a part for -- -- (^^;
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
It will be a moriwaki if it is called an engine slider. It is the shin without liking to feel, if it can be performed whether the effect has been felt yet. Is this product touch that look before you leap? You should equip with the direction wh
It will be a moriwaki if it is called an engine slider.
It is the shin without liking to feel, if it can be performed whether the effect has been felt yet.
Is this product touch that look before you leap?
You should equip with the direction which wants to protect an engine, and the direction where an engine wants to become hollow in and to avoid --.
View detail
Even if it equips, it is searching in the smart thing, and it arrived at this product. being very massive -- if compelled -- I think that it guards perfectly when saying. About wearing, the bolt attached now is removed and it only attaches with an
Even if it equips, it is searching in the smart thing, and it arrived at this product.
being very massive -- if compelled -- I think that it guards perfectly when saying.
About wearing, the bolt attached now is removed and it only attaches with an attached bolt.
Since it is not necessary to remove all, I consider a bolt as it is better to work once it checks of which portion a bolt is removed in advance before loosening a bolt.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZrX1200ZrX1200 DAEG
It is a safe moriwaki skid pad. Although it is to ZRX1200-08, it can attach also to ZRX1200DAEG. It is seldom conspicuous and texture is also very best.
It is a safe moriwaki skid pad.
Although it is to ZRX1200-08, it can attach also to ZRX1200DAEG.
It is seldom conspicuous and texture is also very best.
View detail
It attached to ZEPHYR750. Although I was lonelier than the engine guard, it chose out of the problem of appearance and an angle of bank here. Attachment is dramatically easy and possible in several minutes. A happy effect has not been tried.
It attached to ZEPHYR750.
Although I was lonelier than the engine guard, it chose out of the problem of appearance and an angle of bank here.
Attachment is dramatically easy and possible in several minutes.
A happy effect has not been tried.
View detail
Since the slider with which it had equipped before separated and it went missing, it thought and purchased in instead of. Although the effect is not tried (it is -- although No. 1 does not fall over), it is likely to demonstrate an effect rather than
Since the slider with which it had equipped before separated and it went missing, it thought and purchased in instead of.
Although the effect is not tried (it is -- although No. 1 does not fall over), it is likely to demonstrate an effect rather than the thing attached before.
He purchased white according to the color of a car body.
View detail
he bought black! attachment will be immediately attached, if there is even a very easy 笙ｪ tool -- he also regards as cool the figure in which 笙ｪ black does not need to be conspicuous and to which it appeared, and it was peevish and 笙ｪ also attached the sk
he bought black! attachment will be immediately attached, if there is even a very easy 笙ｪ tool -- he also regards as cool the figure in which 笙ｪ black does not need to be conspicuous and to which it appeared, and it was peevish and 笙ｪ also attached the skid pad.
A photograph is a super low speed, is super-slow motion, and the crack of a skid pad when it is a hill, it cannot finish supporting on foot and it has pushed down is attached, and it is condition.
it is dared to carry what was attached in the crack ^^; While carrying out one's left leg under the motorcycle and carrying out impact absorption, there was also favor of a skid pad and the crack was that the crack went into the mirror for a while! such -- standing and saying dramatically in the scene of GOKE -- it is . [ smile ]
Since it is black, it is not conspicuous even if a crack is attached.
however -- although I think a corner and that it depends on a situation and speed [ whether it comes out and is how much helpful ], without he would like to meet with such a situation -- the shin.
Since neither a smile and a corner nor the degree of incidence to the frame stand and according to GOKE is known, four stars are used! Mr. Manufacturer will make it five stars which offered the information [ influence / on a frame ] were uninfluential, by the experiment and the numerical value.
(I think that it changes depending on how to fail to get off the ground.) In a direction to stand and not damage by GOKE, it is recommended by all means.
although there is also an engine guard -- XJR1300 -- not being quite satisfactory .
CB400 When attached to SUPE 2, even if it carried out the spin at the corner, the engine was protected firmly.
(It was crowded to the tank ^^;)
View detail
Fits: DUCATI MONSTER1100/S, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI MONSTER696
It seems that it purchased since it was a little cheap compared with DUCATI MONSTER 1100S to the make of the purchase other company, but it is satisfactory to functionality. In order to remove the mount bolt and nut which are attached from the first,
It seems that it purchased since it was a little cheap compared with DUCATI MONSTER 1100S to the make of the purchase other company, but it is satisfactory to functionality.
In order to remove the mount bolt and nut which are attached from the first, unless it works since the bolt side is fixed, it cannot idle and cannot remove a nut.
2 sets of socket wrenches are prepared, or a device is required.
(I loosened from the bolt side with the socket wrench, I having combined the adjustable wrench with the longer socket, and fixing the opposite side.) The attachment itself was easy and it was able to be managed with about 10 minutes.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
It is wearing at CB400SF (NC31). Although surely an engine is protected, if it falls violently, a meter will break or a handle will bend. It seems that excessive expectation cannot be performed so that what is protected to the last may be only an
It is wearing at CB400SF (NC31).
Although surely an engine is protected, if it falls violently, a meter will break or a handle will bend.
It seems that excessive expectation cannot be performed so that what is protected to the last may be only an engine.
Since it is a product made of resin even if it falls, there are characteristics referred to as not damaging a road surface, and I thought that they were parts of a circuit use graduate.
It is also safe that repair parts have also come out.
View detail
It fell on right-hand side. Once, although the skid pad was attached, the crack went into the cowl. (Although it is better than not having attached well --) I think that a crack will not go into a cowl to a slight degree if it excels. I think
It fell on right-hand side.
Once, although the skid pad was attached, the crack went into the cowl.
(Although it is better than not having attached well --) I think that a crack will not go into a cowl to a slight degree if it excels.
I think that I will exchange to it since repair parts have 70 mm.
View detail
![[IDEAL] Frame Slider](https://global.webike-cdn.net/photo/article/74/1287886627774L.jpg)
Evaluation is difficult parts and it was peevish, and since it was the best reason that Colet does not achieve a duty when it could do, it attached to wwwB-KING. Since B-KING is that tank cover anyway, 1 time of the repair cost which it stands and occ
Evaluation is difficult parts and it was peevish, and since it was the best reason that Colet does not achieve a duty when it could do, it attached to wwwB-KING.
Since B-KING is that tank cover anyway, 1 time of the repair cost which it stands and occurs in GOKE becomes quite more nearly big-ticket than other motorcycles.
Short-legged I stood at every waiting for a signal by CHIBI, and it was cut by fear of GOKE.
I think it large that it can obtain the sense of security which is a grade which is these parts.
Well, since the tank form is Allais, the slider itself becomes longer than the object for other vehicle types, and I regard that it is a little conspicuous as the unavoidable kana which was.
Since it still is not farther [ than a hard overseas fellow ] conspicuous, it is O.
View detail
This slider is attached to GSX1400. First, depending on a view, a price is also stretched very well in Ho who is examining whether a mount slider will be attached, and it is not good-looking, and, and yet, is a degree of an effect... Is it a plug now
This slider is attached to GSX1400.
First, depending on a view, a price is also stretched very well in Ho who is examining whether a mount slider will be attached, and it is not good-looking, and, and yet, is a degree of an effect... Is it a plug now [ direction ] which is considered to be ??? It is the impression based on real experience from me to such a direction.
The other day, it fell also with the misfortune.
However, since this slider was attached, damage remained in the minimum.
Although I attach white, I match the coloring of GSX1400 K7 very much, and think that it is individual with it being Good.
And since it was preeminent also for the effect, we recommend you to attach a sake [ when a slider is emergency ] (direction currently examined).
View detail
![[IDEAL] Frame Slider](https://global.webike-cdn.net/photo/article/71/1287119344071L.jpg)
It worried about a moriwaki or BabyFace and decided here. Since it seemed that pad parts were longer than the thing of others [ the relation which must carry out a drilling process to a cowl and out of which a pad comes on a cowl ] although it has rid
It worried about a moriwaki or BabyFace and decided here.
Since it seemed that pad parts were longer than the thing of others [ the relation which must carry out a drilling process to a cowl and out of which a pad comes on a cowl ] although it has ridden on CBR600RR of 2010 models -- (there is no telling whether to be this TO)
Since a drilling process was impossible by itself truly, I had you ask for it by Schopp.
Since that of wages is higher than honesty and an article, it worries, but I think whether it is required in considering the time of falling.
View detail