Reviews
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa
Self-installation (*>_<*) no
If you ask a motorcycle shop, it will cost you a 10,000 yen bill, so I installed it by myself. I bought a Chinese 22mm hole saw for 498 yen and waited for 3 weeks. I bought a Rear Wheel stand for 1980 yen from Amazon (This is GSX1300R HAYABUSA easily raised and works more than the price) and used Front Wheel Clamp. Confirming the position of the hole opening with the attached paper, first of all, from Left. The position of this one was decided in one shot, but the Right Side has been gapped about 1 cm, and it was able to adjust and install after a shaky start. The adjustment part is hidden by the protector, so it looks OK. View detail
Parts that may have different tastes.
Simple EngineDesign of Z900RS is lonely and dress-up effect. and Guard for practical use.
Thinking that it looks a little bit persistent, the billet of his Machine I'm relieved that it fits in with the parts without any discomfort.
It's expensive and looks like it's floating when it's mounted with a single body, so it's likely to divide people's tastes.
From a practical point of view, it was useful when I was standing and stumbling. There is no difficulty in installation. However, it is not difficult to install the Point cover (DOREMI products) If you want to install it at the same time as the Slider, you need to gain height on the Slider side.
View detail
It was not Bolt On
The position of the Bolt hole of one of the resin parts does not fit, and it is necessary to correct the hole using the stick file by oneself and to make a new hole The cost may be high, but after a provisional assembly inspection, I was able to assemble it It would be more conscientious to be shipped In addition, because the Base is aluminum and the screw hole is cut shallow, I feel that it is weak in terms of strength I made it lightly to tighten View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900
There may be a quality difference
I had it installed at the shop when I bought my new car LargeI was happy with it, but it cracked after 2 years of installation I never once hit it by standing or falling There may be a difference in the quality of the individual pieces, but I think it's a bit of a shame View detail
ProductBody is zero, Included Parts:Bolts? No
ProductBody is 0 good, Included Parts:Bolts are ? No M10×60mm 1.25Pitch 2pcs M10×70mm 1 .25Pitch1 pc
M10× 75mm 1.25 Pitch 1 pc (Bolt to mount on vehicle) All 4 pcs Inaccurate, cannot be screwed in, Material:I bought the Stainless Steel at the nearby Screw shop By the way, it cost me 2013 yen for 4 pieces
View detail
The lower part of the Engine will be grounded
I thought it was OEM, so I bought it I wanted to know how much protection effect it has, so I asked my friend to help me I gently knocked over the Motorcycle
The result is not good Even if you have a mossy finish, the Engine may have Wound or broken footpegs It is not possible to float the Engine as reliably as the Engine Guard It doesn't seem to be possible
View detail
Fits: KAWASAKI Z1, KAWASAKI Mk2, KAWASAKI GPZ1100F, KAWASAKI Z1-R, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z2, KAWASAKI GPZ1100F, KAWASAKI Mk2, KAWASAKI Z1, KAWASAKI Z1-R, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z2, KAWASAKI GPZ1100F, KAWASAKI Mk2, KAWASAKI Z1, KAWASAKI Z1-R, KAWASAKI Z1000J, KAWASAKI Z1000R
Try it
I thought it would be best as a Z series Slider with a sharp design, but After I thought I didn't have to install it in the first place, I became aware of completely unnecessary Items
It might be better to have it for Circuit driving, but is it necessary for those runs? That said, it's not essential
After using it for a long period of time, I think that the slider part of the resin has become white This may be a problem of the material, but it is not so much the raggedness as the body of the car It bothered me because it made me feel cheap
I don't have any problems with the workability of the installation, so I think it's something like this I have no choice
View detail
Fits: BMW S1000XR, BMW HP4, BMW S1000RR, BMW S1000R
Oil leak after installation
Engine cover, Clutch cover, Front sprocket cover3 I bought it to unify the points with SSK, but unfortunately, the day after I installed it, my Oil went off It was oozing, so I tightened it up, but it didn't go away
I tried to go back to OEM, but the bolt ran out of screws and it broke off and I couldn't do anything about it I had to have it removed at the Dealer (labor costs and tears) Too bad!
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000
Small
It's pretty Smallish (lol) when I installed it Of course, I don't want to be taken care of, but you won't know how well it works until you roll it
Bolt seems to be somewhat cheesy
Installation is easy, no need to remove the Cowl
The instruction manual is in English
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA
Good
Unlike the other manufacturers, I liked that it was not very noticeable It may be the individual difference of the vehicle, but there was a place which interfered with a part of cowl and I shaved with File And although the tightening torque is described in the Instruction Manual If you tighten the torque, it won't torque-tighten I stopped to some extent and in some places So far, no oil leaks etc., so I'll have to wait and see View detail
I am satisfied with the accuracy and appearance of the product ..
This is probably due to the design of the Frame, but the quantity:Pair (for Left and Right) It is not a Penetrating type, so there is some concern about its strength in case of a fall
If it's just a standing mock-up, you'll probably only need to use SliderBody's Damage, but if you're driving If it falls over, there is a possibility that it will break from the Bolt's thinness
However, I chose this product because of its SMART look when installed
View detail
Removing the Cowl is a pain in the ass
The Cowl cannot be attached or detached while the Slider is still attached
You can install the Cowl without removing it It was written that you can remove the Cowl without removing the Slider, but on the contrary, you can remove the Cowl It will be gone
Frequent removal and installation of Engine Mounting Bolts is a hassle
I'm considering switching to another product
If you don't do your own maintenance etc., this is the only product that isn't a direct mount Recommended
It is not recommended for those who frequently take Cowl on and off and service it
View detail
It looks normal
I installed it on the GSX-S1000 (no markings)
It's a Slider with just the right amount of protrusion and a good but not overly assertive feel to it, and it's a Slider that doesn't feel like it's too much of a good thing I think
I can only hope that I won't have to take care of you
View detail
65 points
I bought it as a SliderGuard, do you like the Design? I couldn't say for sure until I came, but the color BESE Black Plate BLUE It was quite beautiful and I liked it The reply said two months for delivery, but I was surprised that it came within a month, installation was easy! However, it took time to remove the FrameBolt of NORMAL because it was hard I removed the FrameBolt and put in new parts It's a little difficult to position the Plate It is the end It's an easy task if you 。 I don't want to be a part of this, but I'm happy with the design, the colors, and the way it looks View detail
The Left Side doesn't stick around
Because the size and shape are small, it does not spoil the styling of the r1, but the Left is a little bit bigger than the right one It's not possible to install it as it is, so you need to either remove the side cover or modify the slider itself But I didn't want to process the new car, so I shaved the Slider to install it View detail
I'm not happy with the installation
To go ahead with the results, it seems to have come off while driving and was lost
The pedestal and the Slider are separated However, the engine mounting bolts hit the engine mounting bolts before the seat surface and cannot be completely tightened Mm
I think this is because of the design of this product, but I think the design is wrong
If you use it, don't forget to apply Screw Lock and check for looseness on a regular basis
View detail
No Cowl cracks
I stood on the Left Side with these Parts, but our Parts are Clutch lever, Side Stand, Footpeg, and Cowl with a degree of splattering I was able to drive myself home with only minor scratches
I'm glad I had it on because I probably would have called the Wrecker if I didn't have it on
I'm not sure if this is the only one that distorts the frame I would like to purchase Engine Guard and install it together with the Plug replacement
View detail
It doesn't look bad, but the AELLA Clutch Assist Plate is installed and (used to make a request or demand) won't work
Because of the interference with our Slider, the
Cannot be used with the AELLA Clutch Assist Plate
In addition, because the position of the plate part of the Clutch and the base of the Slider are very close, there is some interference I will
I want to recommend AELLA's Slider to you, just in case it's dangerous
I may buy it again
View detail
Damaged by a low-speed fall on a public road
Used in GSX-R1000 K7
When I rode in the cold winter months, the Tire wasn't warmed up and I had to make a Right break from a pause SlipDown
In that case, the Slider was shattered and the Mounting Bolt was bent The collar of the Aluminum Collar and the collar of Frame side of the original part was also bent by the effect Slightly deformed
Damage of the vehicle is shaved off of the OEM exhaust system, side cowl Crankcase was shaved, Brake lever was bent, and Slider was cracked Without it, Damage would have been much smaller
It may be because it's been a few years since it was installed, or it may be because the temperature was low, or it may be because it was originally cracked I don't know if it is an easy material to use
We won't know its true value until an emergency occurs, so …
I think it's best to think of it as just a good luck charm for standing back; SlipDown doesn't give you much hope!
View detail
The EngineOil Filler Cap doesn't work!
The texture and sense of security are as expected of BabyFace For installation, it is better to remove part of the cowl It is not in the product description, but as shown in the product photo, the EngineOil Filler Cap You need to replace it with a shorter type because the EngineOil Filler Cap will not open if it is OEM Note that if the EngineOil Filler Cap is OEM, it won't open Please! I didn't realize it until after I installed everything View detail