Reviews
Fits: HONDA CB1100, HONDA CB1100 RS, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP
General Slider
The car was delivered with DAYTONA's Engine Guard installed.
Because I scraped it just by driving normally on a mountain road,
Changed to Slider.
I am concerned about Damage to the Motorcycle in the event of a fall.
View detail
Engine protector
I bought it because I wanted to protect my Engine from being scratched easily, even after just one stumble! I have not fallen over yet, but I put it on as an insurance policy. It is easy to install, so I recommend it! View detail
Fallen cannibals
[How is it used?
I installed it on my last model CB400SF.
This is a beginner's family Motorcycle and there are concerns about standing and falling,
There are several manufacturers, but I chose this one because of its simple design.
Was the one you received as per Image?
Yes, Aluminum base and DURACON SliderBody, Color, Bolt Quantities:Set. Decorative stickers are included, but I did not apply them. I thought about Pipe Bumper, but I decided to use Refreshing Bumper.
Was the installation difficult?
Tools used:14mmSocket, Extension bar, Breaker bar, 14mmSpanner for holding the nut on the back (or Glasses Wrench) Only.
I used a breaker bar instead of a ratchet handlebar because the NORMAL Engine Mounting Bolt is tightened hard. Especially on the Left Side, the Nut is located close to the Radiator hose and the Exhaust System, so it is best to work on the Engine when it is cold.
If you work on one side at a time, you don't need to use Jack and it's Large sturdy.
How was your experience with it?
I hope you don't have to come in.
[Included Parts:were they on?
It comes with a Sticker that wraps around and attaches DAYTONA! As you like.
[Was there anything that disappointed you?
I think 10mm longer would be more secure.
Balance between design and function is difficult.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT Edition
Simple
I was looking for something Simple and inexpensive with text and WITHOUT Logo and came across this.
Can be installed on zx4r with no problem and Cowl can be removed.
View detail
DAYTONA Engine Protector
Yamaha XSR900 (23). 5 days to deliver to Singapore by EMS. Easy to install with socket wrench. Material looks sturdy. Patruding width looks good. View detail
Fits: YAMAHA XSR700, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07
Installed DAYTONA products every time of transfer
I have purchased this every time. I have had a few minor rollovers on my previous Motorcycle, but only the Slider was scraped and the other parts were only faintly scratched. View detail
Fits: HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1100, HONDA CB1100, HONDA CB1100
Good color and gloss.
I am satisfied with the moderate color and gloss, and it does not blend in with the color of the car body. View detail
a cane before a fall.
I had a MORIWAKI Skid Pad installed on my ZEPHYR750, and it was effective enough for standing chock,
We immediately installed it on our new XSR as an insurance policy.
The work is not difficult, just make sure to keep Torque control.
View detail
easy
I have yet to beat it, so the effect is unknown, so I am using Center for the effect item.
Installation is Quantity:Pair (for Left and Right) We had no problem if we worked on the remaining side after either one was completed.
I would like to use it as little as possible, but I think it is cheap if you consider it as a peace of mind fee.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT Edition
Best in the world!
I wasn't planning to install the Slider, but since I raised the ride height by 20mm, my heels would float, just in case.
Compared to other manufacturers, the cost performance is outstanding and the manufacturing is solid. My 25R is not an SE, so the installation was completed within 3 minutes on the One Side.
View detail
just to be sure
I was confused because there seemed to be various Merit/Demerit products when I looked into it, but I didn't want to scratch it, so I installed it when I bought the new car anyway. The installation was very easy, as all I had to do was remove the original bolt and use the bolt that came with this product to tighten this product together (of course, it sticks out quite a bit to the side). Note that there is a Red line in the product photo, which I was going to remove when I installed it because it does not match the color of my Motorcycle, but I am glad that it was actually included as a Seal separately from the product. I have not tipped it over, so I am not sure about the effectiveness of the product. View detail
It is easy to install.
Was the one you received as per Image?
Street Image
Was the installation difficult?
The existing bolt on the Both Sides car was too hard (I thought the ratchet would break), but the ProtectorBody was easy to install with clear instructions.
How was your experience with it?
We want to make sure that Protector does not have to be active. It is economical to purchase parts in case it is scraped off.
[Was there anything that disappointed you?
Does it stick outward more than expected? Well, it's a Protector, so maybe that's all right. The color could be a couple of centimeters shorter, but it would still be large and sturdy. It might also improve the balance of the appearance.
View detail
I'm satisfied with the solid product.
The material and expression of the slider are very luxurious. The installation was as simple as any other slider, and I think my cb400sf will provide excellent engine protection. Sliders, included washers and bolts are also very strong. View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI ZX-14R
Cospa good
I like that it is inexpensive compared to otherManufacturers.
The product seems solid and sturdy. I have not had any problems with it so far.
However, there is no Logo or anything, and it is tasteless. It is not something that will be cool if you put it on, which is fine. Installation is easy if you have the right tools. (^o^)
The Torque is very high, so a Large Spinner Handlebar is necessary. Also, I put a Jack under the Engine just in case.
View detail
Fits: HONDA CB400SF Spec-II, HONDA CB400SF Spec-I, HONDA CB400SF Revo, HONDA CB400SF Spec-III, HONDA CB400SB Revo, HONDA CB400SB
DAYTONAEngine slider
This product is useful in the event of a standing fall. View detail
Also Daytona
Daytona deserves its name.
I considered other products, but the price difference is almost 3-4 times.
This quality at such an affordable price, and the design is simple, so there is no harm to the bike design.
Shipping is also very fast.
100 points for purchase satisfaction.
-------------------------------------------------- -------- After all, Daytona is the name. I considered other products, but the price difference is almost three to four times. At this low price, this quality is simple, so there is no element that is harmful to the bike design. Delivery is also very fast. Purchase satisfaction is 100 points. Powered by Google Translator
View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100
Strong and safe
Like all Daytona products, packaged securely and includes clear instructions (in Japanese) with pictures. Would've been helpful to have a little more info about where to jack the engine to support it during bolt removal, but you can figure it out. Hope I never have to use them, but I'm glad to have them! View detail
Mounted on MT-09SP 2022MODEL
The vendor from whom we purchased Motorcycle installed it for a labor charge of 0.2h.
I contacted Daytona and they replied that they have confirmed the installation on the 2021, but have not yet confirmed the installation on the 2022.
The OEM Protector costs close to 40,000 yen, so I think it's a good deal, just in case.
View detail
Installed together with Performance damper
It was installed together with the Performance damper.
Since the SliderBody and collar can be separated, the Damper side does not use the supplied collar, but uses the KITACO Aluminum spacer for M10 OD. (A):Φ22× Thickness (B) Quantity:8mm:2pc. When set between the two, they are about the same length as the other side, and a damper can be attached with the included Slider Mounting Bolt.
View detail
Peace of mind
I regretted that I should have put it on before I put it on because I was standing on it.
It sticks out quite a bit, but that gives it a sense of security.
I hope you don't roll over and don't need Protector.
View detail