Reviews
I would like to have a larger size!
Purchased as a countermeasure for Enduro race, which is expected to be in muddy condition.
If mud gets into the gaps in the Under Guard, it will make it much heavier and washing the car will be Large strange.
The countermeasure is to fill the gap with this Sponge.
It worked well in actual driving, bouncing mud off the ground.
SpongeQuantity even if you use it for Off-roadFull size vehicles if you want.:I felt that it would be better if they could sell it in a large size so that only 1 pc. is needed.
View detail
countermeasures against mud
[How is it used?
Situation that cannot be avoided when playing Enduro with HUSQVARNA TE250i Muddy." I think that the secret to longevity is how much we can enjoy this Condition. I feel that the secret to a long life is how much you can enjoy this Condition.
I don't dislike driving in the mud that much, but I can't help but fall over or run in a swamp. Mud, dirt and others are heaped onto the Motorcycle in Large quantities.
this "Mud." One article reported that the weight of the car before and after driving in Muddy condition can change by nearly 20 kg due to the mud adhesion factor.
I was convinced when I read the article that it was really my motorcycle that had fallen over with mud on it.
If that's the case, let's take various measures to prevent mud from sticking! So, I'm an Off-Roader-Large lover. Dirt ace" Ya Silicon spray. I sprayed a large amount of "Mud" and drove around. The feeling was that it was better than nothing, but the mud adhesion was not that small because of the spray.
Then, let's physically prevent mud contamination! That is why we put on this Sponge.
DirtFreak has also released a Formetc. to be attached to the FenderReverse side, but we heard that it is difficult to remove it once it is attached to the Fender, so we were the first to install this Form, which seems to physically prevent mud from mixing in by putting it in the gap.
How Large is Large? We didn't even know how much we needed for the Husk, so we used the Quantity:2 Set is purchased and installed.
As you can see in the image, we put it between OEMGuard and Engine.
Actually used about half of 1pc. Quantity:2pc. No Set was needed either.
I installed it and had a Race with Muddy running, so I actually used it, but I feel it is lighter because it is indeed physically free of mud. Washing the car also became somewhat easier, so it is effective for the price.
I was concerned about the heat resistance with Engine heat, but I used it for 1Race2 hours and had no problem at all.
I think everyone should install Enduro rider.
Was the one you received as per Image?
How was your experience with it?
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Necessities
It's a must-have when wearing Under Guard. View detail
To prevent mud clogging
I bought this to prevent mud from getting stuck between the bottom of my car's engine and the skid plate. I haven't ridden the car that much since I installed it, but I think that filling the gap makes it harder for mud to get in. I think it will be more effective in situations like Muddy's Race, where mud gets stuck everywhere. View detail
I guess you could say it's essential when you're Muddy.
Because my car has Under Guard of the type that goes around to the SIDE, I install it so that it pushes in from the side with Image instead of the mud that comes in rather than in Under Guard.
Up front, I have a not-so-nice looking but appropriate Clear File hanging from the Radiator guard with a Tie Band to prevent mud from sticking to the tires.
The effect of these two is immensely large, and depending on the condition of the soil and rain, maybe 3 to 4 km of mud adhesion can be prevented.
It is easy to wash the car after driving. Of course, mud will accumulate in the Under Guard, so it is better to remove it and wash it.
Even if you're not a Muddy, you may find it easier to keep them on during normal driving conditions.
I thought that if I just pushed it in from the side, it would fall off due to the vibration while driving. I thought so, but it has not fallen off even once.
With this usage, I only needed to purchase one of these Forms and it was enough.
So-called Sponge. So I had a suspicion that it might melt if it touches the Engine which becomes high temperature, but it seems to be Large strong.
I used it in Dry in the middle of summer, but it did not melt and was Large strong.
After use, you can wash it in normal water, dry it, and use it repeatedly.
I don't clean it carefully because it gets dirty anyway.
This is not a soft Sponge like Car Wash Sponge or Kitchen Sponge, but rather a stiff material.
When I left it outdoors exposed to the direct sunshine of midsummer and the cold air of midwinter as it was, when four or five years had passed, ParaPara and black powder came to fall from Form. I think the number of times it was used was about 10 to 30 times.
I had to throw it away because the surrounding area gets dirty, but I think it's very cost effective because it's cheap and can be used repeatedly.
Even if it is just Sponge, it is difficult to find on the market because of its special use and location, so I will definitely repeat it next time.
View detail
Car wash is a breeze! Atmosphere Large thing!
I bought these to prevent mud from building up in the Under Guard before the Muddy for Race
I used it on my WR250R, but Quantity:If you buy 2 sets, the Large body Under Guard area is filled
Washing the car is easier because it's less likely to get mud in (* 'Ω `*)
I remove the Under Guard every time I change the oil, and I'm looking at it, but the amount of mud is clearly more than when it's not installed
Later, my Motorcycle Under Guard doesn't have a hole for oil drain It's a type that is difficult to get into, which means it's not easy for water to go out Drain bolt is now full of Rust
Regular cleaning may be a Large thing..
I had a blind spot, it's a rather elastic sponge, so when I first installed it The Under Guard is bulging and hard to install
Well, there's no point in being skunked, so I guess we'll just have to go with it..
If the price is a little bit cheaper, I think it will be a natural product for OffLoader to install I do (* 'Ω `*)
Everyone likes Large Lightweight, this product reduces the weight of the soil that increases when driving As a result, it's substantially better than cars that aren't installed Lightweight, ( ● ? Ro??) ????
View detail
It's not just a Sponge !!!
【What made you decide the purchase?】 Mandatory Watching other people use Muddy's Race
【How was it actually used?】 Required Firm, elastic in Sponge, easy to put in the gap
【Was it difficult to install? (Hard parts case)】 Optional Sponge itself is easy, but it was a pain to add an undagger with Sponge in between.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any
*
* [Is there anything I was disappointed about?] It is not required
* [Hope for Manufacturer - Please tell me if there are any improvement points】 Required It is not at present.
* 【Have you compared items?】 Required
* Home center's normal Sponge
* [Others] Any
View detail
Easy and effective Large
In running with Muddy, sandwiching this between the Skid plate and the engine will not result in mud and it will not cause unnecessary weight increase. Easy to remove because it is easy to wash at the time of car wash and you can wash it cleanly and you can relax because the mud is not clogged. View detail
Engine bottom
【What made you decide the purchase?】
I bought it to make it difficult for dirt to enter between the Skid plate and the Engine.
【How was it actually used?】
I do not know because it is under the Engine, but the thing that the mud enters inside the Skid plate has decreased.
Also, from the bottom of the Skid plate, the Engine reflected sound became somewhat less.
【Was it difficult to install? (Hard parts case)】
Just put it in the Skid plate.
[Is there anything I was disappointed about?]
There is none.
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none.
【Have you compared items?】
There is none.
[Others]
As Form's eyes are made rough, it does not look like Sponge.
View detail
Muddy essentials
This will prevent mud from accumulating between the Skid plate and the Engine in Muddy driving and becoming heavier. It also makes car washing easier. It is an exclusive item to withstand even the high temperature of Engine. View detail
To those who are tired of mud car wash
Every time, Under Guard of Motorcycle that got muddy, muddy comes out even this, Enduro...
Why is he Small Shi-chan as to come out when forgotten.
If you look closely well, Small Bran - chan who makes a face with Konnichiha, Mr. Straw.
It is this Urethane foam that eliminates the gap that they enter!
If you buy it at Home center, I'm worried that I will not be able to solve it!.
However, without Under Guard there is no point!
Stuff it into the gap between Under Guard and Engine.
Then see, the car wash is easy!
And it will not get heavy!
View detail
It attached simultaneously with ED Skid Guard wearing. -- getting mud blocked clearly -- -- since it is serious form -- -- the crevice was previously filled up with this Sponge. This is also a safe Parts.
It attached simultaneously with ED Skid Guard wearing.
-- getting mud blocked clearly --
-- since it is serious form --
-- the
crevice was previously filled up with this Sponge.
This is also a safe Parts.
View detail
if it equips with an Engine guard -- between an Engine and Plates -- mud -- -- it accumulates very. If it equips with the Form between Plate Engines in order to prevent it, only the minimum mud enters and a car wash is easy.
if it equips with an Engine guard -- between an Engine and Plates -- mud --
-- it accumulates very.
If it equips with the
Form between Plate Engines in order to prevent it, only the minimum mud enters and a car wash is easy.
View detail
The plants invasion between an Engine and a Skid plate is likely to be prevented. Slight resonance of the Engine may also be prevented.
The plants invasion between an Engine and a Skid plate is likely to be prevented.
Slight resonance of the
Engine may also be prevented.
View detail
[ -- the Webike Monitor ] -- since there is a Volume that it is unexpected, it corresponds also with a big car body one.
[ -- the Webike Monitor ]
-- since there is a Volume that it is unexpected, it corresponds also with a big car body one.
View detail
[Buying motive] When attaching the under guard of pro skill to -KDX220SR (99), it is used for the crevice between skid plate and an engine published also by Mr. Webike's HP, and the fatal damage by a mud jam or a stepping stone is prevented. It is pul
[Buying motive] When attaching the under guard of pro skill to -KDX220SR (99), it is used for the crevice between skid plate and an engine published also by Mr. Webike's HP, and the fatal damage by a mud jam or a stepping stone is prevented.
It is pulled by and is this product DRC skid plate form product number:D58-17-012. 30 cm x general-purpose size:15-cm were purchased.
[Attachment of goods] etc. - book product is cut and inserted in the form of the vehicles lower part with scissors etc., and an under guard is only fixed.
- It is easy to treat to the extent that the small hole for drain bolts, etc. go out simply with scissors.
- There is no mud jam now.
[Grading of goods] - size is also a size which can respond to almost all motorcycles, and it is a thing cheap [ a price ] and ordinarily good.
It is considered as four stars.
View detail