Reviews
Fits: KTM EXC150 TPI, KTM SX125, KTM SX150, KTM XC125, KTM XC-W125, KTM XC-W150 TPI, HUSQVARNA TC125, HUSQVARNA TE150I, HUSQVARNA TX125, GASGAS MC125
be too soft
Used on a KTM 150EXC.
Purchased because it has a slightly wider range of protection than the Under Guard that comes with the OEM and is more reasonably priced.
The back end is hooked to the Frame and the front end is bolted via a special Bracket.
I was driving on a rocky OffRoad course and I noticed that the back end had come off and bLOOVE it. I thought that was ridiculous and reinstalled it by deflecting the product with my hand. It went back on easily. No, if it bends and distorts so easily, that's why it comes off right away. As I expected, it came off right away and I was in love with it.
I had no choice but to fix the back end with a thick Tie Band and ran that day, but I immediately returned to the OEM one and it has been in the drawer ever since.
It seems to come off easily when you go igoigo with the underbelly applied, so I guess it is good if the course has no stir, such as a rocky area. It seems that the position of the bolt fastening at the front end is too far forward, which is also not good.
I don't know about the SX and the Guard itself, as they seem to share the same fixing method, but the Guard itself is too soft anyway.
I also hit a rock hard under the belly with this Guard on and it dented the Frame a little. I am very disappointed, however, because I have never had a Damage on the Frame with the OEM Guard in the same way.
View detail
Fits: BETA RR 2T 250, BETA RR 2T 250 RC, BETA RR 2T 300, BETA RR 2T 300 RC
Cracked.
I just recently purchased it on Outlet.
It cracked after one use. I didn't ride it HARD, just a few times over logs.
Was it cracked or degraded from the start?
I don't know if I'm riding the wrong way, but I think it's moroi.
You should check it carefully when you buy it.
View detail
The position of the drain bolt does not match. The position of each bolt is also slightly different. Too bad.
I regret buying it. Too bad about the Bolt position and hole location, as cool as it looks on the outside. View detail
Yes, if you want to process it.
I am using it mainly for forest road touring.
The sense of security has been Up Large width.
It's just badly made and full of BALI.
I also bought one for DJEBEL 250 XC.
The packaging is marked for kdx200 and
It is a suspicious product with DR250R and modified Seal on it.
I'm sure you've been forced to use the Gold model of other models.
The profile does not match the frame and interferes.
That's why I removed both ends of the interfering Guard and Profile
I matched it.
Since it is resin, processing can be easily cut with a gold saw.
Given that there are no other new Guard for DJEBEL.
Well, I thought it was acceptable.
If you want to install it neatly, I think processing is necessary.
View detail
Fits: SUZUKI DR250R, SUZUKI DJEBEL250XC, SUZUKI DJEBEL250XC
Quality, precision is not good.
To put the Guard on the DJEBEL 250 XC, this product only appears. I packed it with the sawteeth in the rear of the Right Side. Miscellaneous quality. Gold amount is also less than 5000 yen item.
12000 yen is terrible. Mounting Bolt nut etc. also purchased again at the separate home center etc. If you can do some processing yourself, I think that there is no problem.
View detail
Machine noise increase Large
There are no plans to run on wasteland, but purchase is important for appearance.
Easy to install with just four Bolt stops.
There is also a hole in Oilfor Replacement and it is a well thought item.
However, it is resonance or the sound of the high range of the Engine becomes large and it is harsh to the ears.
View detail
Appearance is tolerable. This light uncanny light was surprised at it. Since I think that there is uneasiness a little if it is in reinforcement, but it turns out that it is used, I would like to carry out in play [ additional ]. it is not dif
Appearance is tolerable.
This light uncanny light was surprised at it.
Since I think that there is uneasiness a little if it is in reinforcement, but it turns out that it is used, I would like to carry out in play [ additional ].
it is not difficult, especially concerning attachment -- if it is as long as 5 minutes, it can attach, but although a frame has a screw hole for skit plates, in an attached screw and washer, a screw is long and interferes with a frame.
Regulation by washer (two-sheet or three sheets) addition is required.
Touch are filled with an engine sound does a little run test.
There is the necessity of attaching the rubber or sponge of a vibration isolation in which there is fairly (at the time [ Speed. ] of 40 to about 60 km) loud sound which it and the skit plate rear interfere with a frame, and chatter sound generates.
View detail