Reviews
Cospar good
I bought this because I was told that without it, the Swing Arm would be scraped off in the event of a fall.
The length of the shaft that came in the first package was wrong, but they sent it to me right away.
I am satisfied with the quality and response for the price.
View detail
antlion antlion Rear slider
antlion antlion Rear slider
Items that should be purchased for Motorcycle protection.
View detail
antlion antlion Front slider
The least expensive product in Slider
Custom parts are gradually being discontinued.
I should probably buy it to protect Motorcycle.
View detail
Antlion front slider
Inner rod dia M6 was to small, M8 or M10 will defintely solid. As i already have front, rear and engine mount kit. "So cool in a set" View detail
Antlion rear slider
Well front slider looks cool, but inner threaded rod only M6 in diameter. If rod were M8 it will be solid. Got front, rear & engine mount, looks cool in a set. View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R
Purchase at the same time as Rear slider
Installed to protect front fork and other parts in the event of a fall.
I think it is just the right size.
I don't know how effective it is because I think Handlebar will hit the ground first, depending on how it falls.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Just in case.
It was installed to prevent damage to Axle Nut and other parts in the event of a fall.
I hope it is not too small, but just the right size to be effective.
I bought White, but the Chain oil splashed on it and it was noticeably stained in Black, so I thought I should have chosen Black.
View detail
It attaches and easy!
It attaches and easy! View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
I think that it is a necessary minimum size.
I think that it is a necessary minimum size. View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
By the rear slider and the hand guard containing a core, protection of a car body thinks or enough and it equips with it. A front is also merely an additional purchase by it being cheaper than other manufacturers. This setting of price is kind.
By the rear slider and the hand guard containing a core, protection of a car body thinks or enough and it equips with it.
A front is also merely an additional purchase by it being cheaper than other manufacturers.
This setting of price is kind.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R
It attached to the sake in an emergency. It is more smart than having seldom become the obtrusive touch but having considered. Conversely, it is as moderate as it will become anxious, saying It is OK ? now if it says. I think that it is good i
It attached to the sake in an emergency.
It is more smart than having seldom become the obtrusive touch but having considered.
Conversely, it is as moderate as it will become anxious, saying It is OK ? now if it says.
I think that it is good in order to protect a brake rotor, a swing arm, etc. in case of emergency.
However, since the die length of a bolt is shorter, the following model wants a margin to bolt length to a slight degree.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
It attached to the sake in an emergency. It is more smart than having seldom become the obtrusive touch but having considered. Conversely, it is as moderate as it will become anxious, saying It is OK ? now if it says. I think that it is good i
It attached to the sake in an emergency.
It is more smart than having seldom become the obtrusive touch but having considered.
Conversely, it is as moderate as it will become anxious, saying It is OK ? now if it says.
I think that it is good in order to protect a brake rotor, a swing arm, etc. in case of emergency.
However, since the die length of a bolt is shorter, the following model wants a margin to bolt length to a slight degree.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R
It attached to the sake in an emergency. It is more smart than having seldom become the obtrusive touch but having considered. Conversely, it is as moderate as it will become anxious, saying It is OK ? now if it says. I think that it is good i
It attached to the sake in an emergency.
It is more smart than having seldom become the obtrusive touch but having considered.
Conversely, it is as moderate as it will become anxious, saying It is OK ? now if it says.
I think that it is good in order to protect a brake rotor, a front fork, etc. in case of emergency.
However, since the die length of a bolt is shorter, the following model wants a margin to bolt length to a slight degree.
View detail
antlion Front slider CRF250L MD47
[How is it used?
Buy for Custom
Was the one you received as per Image?
Yes
How was your experience with it?
Satisfied
[Points to note]
Nut co-tightening from both sides, so a socket wrench is needed for that.
How did it compare to other products?
MD47 Slider is the only product available, so I can't compare.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Wish to develop products with hexagonal hole Bolt
View detail
antlion Rear slider CRF250L MD47
[How is it used?
Buy for Custom
Was the one you received as per Image?
Yes
How was your experience with it?
Satisfied
[Points to note]
Nut co-tightening from both sides, so a socket wrench is needed for that.
How did it compare to other products?
MD47 Slider is the only product available, so I can't compare.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Wish to develop products with hexagonal hole Bolt
View detail
After all, this is the MOTARD Slider!
I really like the antlion Slider, the shaft strength is solid, the quality of the duracon resin is good, and the mounting bolt comes with a SpringWasher so you don't have to overtorque it to get it loose.
This time I put it on my dr-z400sm which I bought a second time.
I am also using it on my WR250X, so I know all about the advantages of the design!
Fortunately, I've never had a fall, but the shape is the smallest possible and the design is well calculated, so it's definitely protective.
View detail
Best Fit and Performance for the Lowest Price
With the Off-roadShop of the neighborhood, First Model Typedr-z400sm of the BALI thing was purchased at a very low price with the trade-in as it is.
I don't have the car in my possession yet because I'm still in the process of getting it inspected and delivered, but I go to the shop every time I have a day off to put on some custom parts and get in the way of my dad's work.
The Slider of antlion that is also being used in WR250X was put on by Front and Rear Set.
This is a good one, the price is very low, the shaft is decent, the quality of DURACON resin is good, and the size is moderate, so the protection range is perfect.
Springwith WasherBolt is a nice consideration.
View detail
Bolt On for some reason.
I heard that there is a case that you need to widen the bolt with a drill when you pass it through the hollow part of the Axle Shaft on the front, but in my case, it was large and strong.
However, there was a trick and mud was stuck inside for some reason. I removed the mud with 4-wheel windshield wiper rubber brackets, removed more mud with a guard wire, and washed with Parts cleaner.
The Steam washer only washes with water to protect the Bearing, and I'd like to see it avenged by not applying pressure, so I'd better watch out for clogged areas once in a while.
View detail
Excellent design at a great price.
I also installed this product in my wife's WR250X for Course. Since it has already been installed on our 2007 WR250X, the goodness of the design of this product, simple and less self-assertive design is superior to the products of other companies.
It is designed to minimize damage to the Shift Pedal and Brake Pedal, and with the Axle Slider and Silencer Slider installed, it is also an excellent guard for circuit riding. It is also a very good Guard for circuit riding. We have no experience with falls, so we can't attest to its actual protective power, but it is well designed and should be used.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R
Outstanding accuracy and design for such a low price
I also installed this product on my wife's WR250X for Course. As it has already been installed on my 2007 WR250X, it is designed to be lightweight, simple in construction and less assertive in design, and when it falls, it can surely protect the Axle Nut and the main parts around the front. The Axle Nut is designed to protect the Axle Nut in the event of a fall, as well as the main parts around the front. View detail