Reviews
The Z900rs requires some modification.
First of all, the design of the text is different between the image and the real thing, but I didn't mind it too much.
The Left Side Lock nut is not included in the kit, so you need to prepare it by yourself. I first selected "Pitch normal" for the Left Side Lock nut and failed to use it. (You are solely responsible for your own mistake.)
The lock nut of the M18 was too tight for the Left Side Protector, so I had to grind the inside of the Protector a little to fit.
Quantity:Pair (for Left and Right) The bolt for penetrating the "B" is also a little long, and it is difficult to apply the tip cap, so both ends were shaved off.
Note that the z900rs does not have a bolt on and requires some modification.
View detail
![FrontShaft protector[Front axis protectors]](https://img.webike-cdn.net/catalogue/images/41365/PV1_pict_03_web_TS.jpg)
Incompatible with ’23RnineT
First, it does not fit the ’23 RnineT. The Axle seems to be shaped differently and the One Side boss does not fit inside the Bolt of the Axle.
So I cut off the boss and managed to use it.
Disappointing result for the time it took to deliver.
View detail
Fits: SUZUKI GSX1300R HAYABUSA
22 HAYABUSA It would be nice to have a 1/4Socket for installation.
This is a general type of Penetrating Axle Shaft.
The 13mm lock nut is tightened with Both Sides, but the entrance is narrow and it is difficult to reach the nut with 3/8Socket. 1/4Socket can easily enter the nut and tighten the lock nut.
It is recommended to work with Socket, which is thinner in thickness.
View detail
Rear Axle SliderShaft is too short to install.
You should not buy it. It will be a waste of Gold. View detail
![RearShaft protector[Rear axis protectors]](https://img.webike-cdn.net/catalogue/images/41365/PK1_pict_00_web_TS.jpg)
Fits: SUZUKI GSX-R 1300 Hayabusa
RearShaft protector
I installed it in case of an accident. I don't know how effective it is yet, but I think it is good for drive shaft protection. I think you can enjoy customizing it to match your motorcycle. View detail
![Rear Axis Slider Guards [Rear Axis Protectors]](https://img.webike-cdn.net/catalogue/images/41365/PKN_pict_1417609301960759_web_TS.jpg)
Unlike Front, Quantity:Pair (for Left and Right) There
I put on Rear Axle Protector, although there are pros and cons.
The image is after installation, but it is not very noticeable and looks good.
The damage may increase due to the longer sliding distance, or it may get stuck and increase the damage due to the lever principle, but we assume that the speed is not too high.
It is a 13mm Nut, but normal Glasses cannot be tightened because the Nut goes inside.
Also, when you close the Quantity:Pair (for Left and Right) If you don't tighten it evenly etc., one Bolt will pop out.
Unlike Front, Quantity:Pair (for Left and Right) There is a
I haven't experienced the effects. No effect." The company is committed to
I hope you don't feel it.
View detail
It's discreet and nice.
I put on the front axle protector, although there are pros and cons.
The image is after installation, but it is not very noticeable and looks good.
The damage may increase due to the longer sliding distance, or it may get stuck and increase the damage due to the lever principle, but we assume that the speed is not too high.
It is a 13mm Nut, but normal Glasses cannot be tightened because the Nut goes inside.
Also, when you close the Quantity:Pair (for Left and Right) If you don't tighten it evenly etc., one Bolt will pop out.
I haven't experienced the effects. No effect." The company is committed to
I hope you don't feel it.
View detail
Axle Slider
Easier to install than Front. It does not look good. View detail
Fits: HONDA CBR1000RR FIRE BLADE ABS
Axle Slider
Installation was easy. It looks … not cool. View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 ABS
Better made than I expected.
Purchased from WeBig.
It was an order item but arrived earlier than originally scheduled.
ProtectorBody is Quantity:Pair (for Left and Right) If you don't make a mistake, you will get it right because there is a difference between the two.
However, the PenetratingShaft is Stainless Steel, but the Washer and Lock nut are Steel.:Stainless Steel was purchased separately.
View detail
Good cost performance and one point color options
Good product at a relatively low price.
It is an overseas product, so the delivery time is about one month? It takes time.
For installation, the Nut inside the DURACON must be
Clearance is narrow, so 13 deep sockets are Quantity:2pc. Set required.
View detail
![RearShaft protector[Rear axis protectors]](https://global.webike-cdn.net/photo/impression/31/31c8dcdd6574680a594e5e3e7f80cd4cL.jpg)
Cost performanceGood
Good product at a relatively low price.
It is an overseas product, so the delivery time is about one month? It takes time.
I received a different Size to begin with, but they replaced it properly.
For installation, the Nut inside the DURACON must be
Clearance is narrow, so 13 deep sockets are Quantity:2pc. Set required.
View detail
The Frame is subtle, long, and poorly made.
The length of the Frame is too appropriate. The actual product is quite small. View detail
The dimensions don't match at all.
I bought this for the rear, but the shaft is not long enough to fit the guard. I'm not sure. View detail
![Rear Shaft Protectors 【Rear Axis Protectors]](https://global.webike-cdn.net/uiu/impression/202110/13_1018910_6166f1c7a138b.jpg)
Cost-effective choice
The first time you buy this brand, the price is more favorable than other brands. The style and performance are good. There are many colors to choose from, which can be matched with different colors. Please note that you need to bring your own hex key and a pair of socket wrenches when installing. Twist both sides at the same time.
The overall packaging of the goods is good, and there is anti-collision material filling protection in the logistics box. -------------------------------------------------- -------- For the first time, buy this brand, the price is more than other brand discounts, style and meticulous colors, can meet different color body with match, please pay attention to the installation before buying, you need to bring your own hexagle and a pair of sleeve panels. 2 is twisted at the same time.
The cargo pack is overall, and there is a collision material filling in the logistics box.
View detail
![Front Shaft Protectors [Front Axis Protectors]](https://global.webike-cdn.net/uiu/impression/202110/13_1018911_6166f2a07bcbe.jpg)
Cost-effective choice
The first time you buy this brand, the price is more favorable than other brands. The style and performance are good. There are many colors to choose from, which can be matched with different colors. Please note that you need to bring your own hex key and a pair of socket wrenches when installing. Twist both sides at the same time.
The overall packaging of the goods is good, and there is anti-collision material filling protection in the logistics box. -------------------------------------------------- -------- For the first time, buy this brand, the price is more than other brand discounts, style and meticulous colors, can meet different color body with match, please pay attention to the installation before buying, you need to bring your own hexagle and a pair of sleeve panels. 2 is twisted at the same time.
The cargo pack is overall, and there is a collision material filling in the logistics box.
View detail
I wasn't on the rear.
The front was attached by another manufacturer, but the rear was not attached, and I installed it so that the Swing Arm would not die when I fell.
The installation itself is simple with the ScrewShaft and Nut tightened from both sides.
If I wanted to, it would be easier to thread the hollow shaft and bolt it in place.
I also added it and the Maintenance Stand is now harder to use:。。。。
View detail
Fits: YAMAHA MT-07
Is it such a thing?
The large size of the Guard on the Right Side of the vehicle does not match the diameter of the Outer tube at the insertion point.
It's a lousy design mistake.
As you tighten the Nut, it will become slanted.
I thought about shaving it off and fixing it, but it got too cumbersome in the middle of doing it, so I just installed it at an angle.
Probably won't bother anyone but the Owner, though.
I may scrape it off and reattach it in the future if it bothers me.
View detail
A bit of a disappointing product…
Slider's bracket has screws on both sides, so it's hard to screw it in evenly. Also, there was only one Cover for Nut in the box. Because I avoided the hot season, I gave up and installed it as it was because two months had passed since I bought it. It was cheap but a little disappointing… (>_<) View detail
RearShaft protector
Bought this for my 2021model PC40. It looks good and I am satisfied.
An ultra-thin 13mm long socket is required for installation.
View detail