Reviews
Fits: HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D, HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D
It is so Exactly that it makes me anxious when I put it on.
Before I put it on, it looked like it might interfere with my work, but it fit perfectly.
It was a perfect fit for my NSR50 Front fork.
I would like to install the balance and the rear, but I am wondering if I should shave 1mm off the Axle of GCraft's Swing Arm because this Slider is too large in diameter.
View detail
It can be used in Normal stand even though it is PRO ARM.
I originally had a STAND that was not for PRO ARM, but since I could not use it on my CB1000R, it was left in the yard. View detail
For peace of mind.
Purchased the product because it was equipped with Over Rear Sets and Sliders.
The sense of unity has been improved by matching the logo,
The product was easy to install without being too subtle, and it was easy to install, but I applied a little Locktite just to be sure,
View detail
Cosmetic! For protection of Axle Shaft.
[How is it used?
Used at Circuit. The screw thread of Axle Shaft was almost crushed when it fell down without being attached.
Was the one you received as per Image?
Yes.
Was the installation difficult?
Just pull out the SHAFT and insert the Cup between both SIDE.
However, if you assemble the Rear Shaft without thinking about it, as has been your habit, you will have to redo the whole thing.
You might want to get into the habit of putting Cup in the beginning.
How was your experience with it?
I haven't tipped it over yet, so I can't give an imprementation, but it is solid and secure for the low price.
The resin Cover is removed, but still high enough for Shaft protection.
[Included Parts:were they on?
It had parts to accommodate M10.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If I had to say so, I would say that the length of the resin slider could be a little shorter, as it seemed to hit the ground in the Circuit.
View detail
Fits: SUZUKI GSX1300R HAYABUSA
22 HAYABUSA It would be nice to have a 1/4Socket for installation.
This is a general type of Penetrating Axle Shaft.
The 13mm lock nut is tightened with Both Sides, but the entrance is narrow and it is difficult to reach the nut with 3/8Socket. 1/4Socket can easily enter the nut and tighten the lock nut.
It is recommended to work with Socket, which is thinner in thickness.
View detail
more than expected
Installed with no problems. It looks better than expected and I am satisfied. View detail
Funnel Type, so Parenthesis is good!
I think the price is high for what it is, but I like the look of the Funnel Type!
It is easy to install., to One point!
Happy with the results!
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1200DAEG, YAMAHA XJR1300
Exclusive Design
It came on without any problem because of Exclusive Design.
It is installed by insurance.
I would be careful not to use it.
View detail
Fits: YAMAHA FZ-10, YAMAHA MT-10 SP, YAMAHA MT-10 SP, YAMAHA MT-10, YAMAHA MT-10, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R6
Gilles axle sliders YZF-R1
DOing a little bit of protection for the R1 recently and decided to go for the Gilles tooling axle sliders. I have used Gilles for protection before and have had really good results even after them getting some action. I found the correct part from Gilles tooling webisite and then searched Webike for the corresponding parts. Luckily, Webike do have quite a lot of R1 Gilles items in stock. Get in the basket. These were part of a larger order as this also saves me money on the amount of shipping. I use now EMS fast as they have never let me down. Even from Japan to the UK takes 4-5 days total. This time around, most of the parts were already in Wrbike warehouse so they all arrived in 5 days. I do love the way Webike package their orders. They take great care in packaging well and keeping everything separate and individually packed. if there is any space, they fill that with extra padding like bubble wrap and/or air pockets. This was the case on this order. Although the box these came in was relatively samll, they are kind of heavy for what they are. The last thing I wanted was for these to be moving around whilst in transit. Not with how Webike package items though, thumbs up for that one. The axle sliders arrived in perfect 100% condition as you would expect. ALl the manufacturing from Gilles is exceptional. They really do know how to make parts and make parts to the highest specifications and quality. They do not take much to fit them, simply a couple of bolts and away you go. If for any reason, these do see the tarmac, I know they are going to do their job as intended. Gilles, you are a superb brand and I am very pleased Webike stock your parts. Thank you Webike for the great service provided with this and all my other orders View detail
Fits: YAMAHA FZ-10, YAMAHA MT-10 SP, YAMAHA MT-10 SP, YAMAHA MT-10, YAMAHA MT-10, YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R6
Gilles Tooling rear axle sliders
Having already decided to purchase the front Gilles Tooling axle sliders, it was only right that I also purchase the rear axle sliders. I found the correct part from Gilles Tooling website. Then again, luckily, Webike also stock the rear axle sliders too. Brilliant. I could probably get these shipped direct from Gilles at around the same kind of price but then I woul have to hope they package their products accordingly. Ended up just getting averyhting from Webike. There were already the front axle sliders in my basket and a few other smaller bits and pieces. The shipping because of this was a lot better value than if I purchased just one or two products from Webike. I use nowadays, EMS fast. The service is spot on, everything is delivered in rapid time, when I say rapid, I mean from Japan to the UK in less than 5 days. All the parts in my order were neatly fitted into a smallish box which Webike took the liberty to seal on the outside. The inside was well packaged and these guys must be great at Tetris as they got eveything in the samll box without compromising the efficiency of the extra packing. They filled any gaps with bubble wrap and air pockets. When these arrived, you can just feel the quality. All the machining is perfect, no weird burrs or shards. The paint is flawless and you also get a couple of different coloured rings which should suit anyone's needs. Fitted really nicely and the overall result is a great looking bike with protection I know I can trust just in case. Very pleased with my purchases, thank you Webike View detail
Need a thin Socket
I was glad that there were no decorative elements in this section, so it was Simple and inexpensive.
The clearance between the Body and Bolt is narrow, requiring a thin-walled Socket.:Pair (for Left and Right) Note that two of the same Size are required because they will turn around unless they are pressed from the
I don't know how effective it is because I haven't tipped it over. (I feel that if the bottom case is tipped over in such a way that it is damaged, it would not be enough to protect Axle.)
I think it would be easier to attach and detach if one side is fixed, but I don't know why.:Pair (for Left and Right) It is a hassle because you have to hold it down from the
View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R
Damper effect expected
Sliders with a single point of attachment are at risk of damaging the frame, but this product was selected because it has a built-in damper to dampen the impact.
It is hard to tell how effective it is because it has not been tipped over. It seems to be less stressful on the mounting area because it has little overhang for its thickness.
I like it because it is a shape that does not make much of a statement.
View detail
Fits: DUCATI XDiavel, DUCATI PanigaleV2, DUCATI PanigaleV4R, DUCATI PanigaleV4, DUCATI 1299 Panigale, DUCATI 959 Panigale, DUCATI 1199 Panigale, DUCATI 899 Panigale, DUCATI StreetFighterV4, DUCATI StreetFighterV2, DUCATI Diavel1260, DUCATI Diavel V4, DUCATI Diavel
Everyone loves Red and Black, right?
[How is it used?
Street Riding Only for now.
Was the one you received as per Image?
Street Image
Was the installation difficult?
Easy to use, but requires two sets of hexagonal bar spanners when tightening.
How was your experience with it?
Function as a Slider is still unknown, but it looks good.
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI Z1000, KAWASAKI , KAWASAKI ZRX1200DAEG, KAWASAKI ZX-6R
Trickster's Front Axle Slider
I wanted a Simple Front Axle Slider and this was it. I haven't rolled it so I don't know how effective it is, but I also think it looks good while being Simple. I think it's a good product in terms of what kind of atmosphere I want my vehicle to have, and in terms of damage reduction in case of an emergency! View detail
Nice fit.
Slider fitment can make the front lower part look more solid and fuller. insurance that will protect against unexpected damage. View detail
Slider
I mistakenly bought the one for M8 when it was Bolt for M10. The product is strong and seems to work well enough. I am thinking of widening the hole to use it. View detail
I think it's the Front Axle Slider from Best Buy.
Someone has already written a Review, so here is another perspective.
Front forkBottom and Brake Caliper are not affordable to replace with Wound.
But when I tried to buy a Slider for that purpose, it cost me 15,000 yen for two small chunks of DURACON and a mere stick of All Screw in a Vinyl bag. I was like, "Are you going to pay 15,000 yen out of the small amount of money you have in your pocket? It was an Image like that.
The quality of each part is so high that it can withstand the act of looking at it next to the PC until the day of installation after it arrives.
The shaft is not just an all screw, but a machined aluminum alloy shaft, so I did not use the included stainless steel screw, but prepared a separate Duralumin screw to assemble the shaft.
This is a great QUALITY product as others have stated in their Reviews.
Before purchasing the product, I was a little concerned about the Logo, which is often noticeable in photos, but in reality, it is a small one, so it is not particularly noticeable.
Anyway, we strongly recommend this product to those who are not sure which front fork slider to choose.
View detail
CBR1000RR-R SP Slider
When I received the product, I thought it was too large and the design was not so good.
Once installed, it fits the car body and is quite good.
View detail
It looks great?
We purchased it because we also wanted Accent for the front wheel of our Motorcycle.
To be honest, I put it on just for looks, but I am satisfied with the Large size, and I have added a cap to the gold POSH bolt for the M6 bolt for installation.
It is also a recommendation for those who want to add an "Accent" to their Motorcycle.
View detail
Slider
The product is quite good, the Rear is better than the Front to fit the Large size car body. View detail