Reviews
Fits: KAWASAKI Z250 (2013-), KAWASAKI NINJA300, KAWASAKI NINJA2 Helmet50R ABS, KAWASAKI NINJA250R, KAWASAKI NINJA2 Helmet50RR
Axle Shaft Replacement
OEMShaft was shaved off due to a fender bender and replaced.
The first difference with OEM is that it eliminates the need to use Split Pin.
This will lead to a MechanicalAdvantage when changing Tire later on.
Next, reduce Damage to Axle Shaft and Handlebar in the event of a fall.
Slider itself is an expensive consumable item, but it is a small expense considering the damage to the handlebar, footpeg, exhaust system, etc. when it falls over.
The 5mm hex Cap bolt allows for quick replacement.
Demerit is that there is no Instruction Manual for handling.
I am not sure about the Torque for tightening the Cap bolt and Axle Nut.
I had no choice but to tighten the nut side with the OEM specified torque and the cap bolt with 10Nm, but I am not sure if it is correct or not.
Next, Cap bolt must be visible.
There was a scattering of imprints that pointed out a few things, so it is possible that rust will occur over time.
If this is the case, please purchase a separate Cap cover.
When installing, be sure to apply grease to the shaft.
I applied Bell Hammer Grease No.0 to the wheel side and No.2 to the nut side to prevent rust, lubrication, scratches, and friction loss.
Unlike hollow shafts, the most outstanding feature of this product is that it can be easily installed and removed, but the lack of a handling instruction manual is the minus point.
The Ninja 250R and Ninja 250 are compatible with this model. (EX250L/M・EX250P) Therefore, it is recommended that you make sure that your motorcycle is compatible with the system.
View detail
Fits: KAWASAKI Z1000, KAWASAKI , KAWASAKI ZRX1200DAEG, KAWASAKI ZX-6R
Trickster's Front Axle Slider
I wanted a Simple Front Axle Slider and this was it. I haven't rolled it so I don't know how effective it is, but I also think it looks good while being Simple. I think it's a good product in terms of what kind of atmosphere I want my vehicle to have, and in terms of damage reduction in case of an emergency! View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-14R, KAWASAKI ZX-6R, KAWASAKI ZZR1400, KAWASAKI ZZR1400
Trickster for Kawasaki cars
Low cost compared to other companies.
I bought these parts because they protected my front fork when I crashed in the Circuit on another vehicle.
I don't want to try it again (laughs).
View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-14R, KAWASAKI ZX-6R, KAWASAKI ZZR1400, KAWASAKI ZZR1400
TricksterFront Axle Slider
Slider, the last resort, all put together by Trickster.
A sense of unity - wonderful!
View detail
Good.
It is easy to install. I took it down tentatively and it looks good. View detail
Fits: KAWASAKI Z1000, KAWASAKI , KAWASAKI ZRX1200DAEG, KAWASAKI ZX-6R
Bolt is a little short
2020 ZX-6R, 2BL-ZX636G.
The length of the bolt is not enough. I installed it with No Color for now.
I'll go look for Bolt ….
View detail
As Bar end slider
Due to the limited shape of the Bolt On, it can only be mounted on the Axle Shaft included in the product in question, and it is heavier than the OEM Product & less accurate.
Since I can't return it, I diverted the Slider as Bar End, but
The included Axle Shaft was unavoidably discarded.
View detail
Fits: KAWASAKI ZX-10R, KAWASAKI Ninja H2, KAWASAKI Ninja H2 SX SE+, KAWASAKI Ninja H2 SX SE
I love the texture!
First of all, the texture is very good. The shaft to fix the shaft is also black and looks tighter. (Although it is hidden by the Axle Shaft...)
It is very easy to install and takes only a few minutes.
I don't know how much protection it has, but I'd like to avoid having to take care of it if I can.
View detail
Small modifications that are better than nothing
The quality is good, in fact, no matter how the car falls, the chance of hitting this position is very small, but it is better than nothing...it has a certain protective effect on the front wheel axle. As for the aesthetics, it depends on your choice. . The Phantasy Star set looks good in my heart. The sizes are completely original, please rest assured to buy. The quality is good. In fact, the chance of the car falling down to this position is very small and small, but it is better than nothing... It has a certain protective effect on the front axle. As for the beauty, it depends on your choice.. Dream Stars suits well, it seems that my heart is still very cool, the size is completely the original factory, please rest assured to buy. translated by Google Translator View detail
Fits: KAWASAKI ZX-10R, KAWASAKI Ninja H2, KAWASAKI Ninja H2 SX SE+, KAWASAKI Ninja H2 SX SE
I am very satisfied..
Easy to install, it also fits the appearance of Front fork.
Design is also my favorite..
I am also expecting performance.
View detail
Fits: KAWASAKI Z250 (2013-), KAWASAKI NINJA300, KAWASAKI NINJA2 Helmet50R ABS, KAWASAKI NINJA250R, KAWASAKI NINJA2 Helmet50RR
[Webike Monitor] Since the Frame slider was purchased with Mr. Trickster's goods, the Front axle was also made into Mr. Trickster. As comment, it was not conspicuous too much and was a good feel in nonchalant touch. It is a charm in case of emer
[Webike Monitor] Since the
Frame slider was purchased with Mr. Trickster's goods, the Front axle was also made into Mr. Trickster.
As
comment, it was not conspicuous too much and was a good feel in nonchalant touch.
It is a charm in case of emergency like the
Frame slider.
View detail
Fits: KAWASAKI Z250 (2013-), KAWASAKI NINJA300, KAWASAKI NINJA2 Helmet50R ABS, KAWASAKI NINJA250R, KAWASAKI NINJA2 Helmet50RR
I think that they are parts in which it is better to be once also a sake [ when / it fell over ]. I think that it can be truly managed with the minimum damage even if GOKE [ stand and ], if both are attached with a frame slider! I think that the size
I think that they are parts in which it is better to be once also a sake [ when / it fell over ].
I think that it can be truly managed with the minimum damage even if GOKE [ stand and ], if both are attached with a frame slider! I think that the size of running out of both sliders is known with a photograph.
View detail