Reviews
Over Racing front axle slider for z650rs
The front axle slider for z650rs from Over Racing is well made and fits the z650rs stock front wheel with minimal tools necessary to install. It’s a direct bolt on and no other necessary bolts or screws are needed for installation. The sliders tip is flushed on the axle as you can see in the picture and installation time is quick. Just insert it in the hole in the front axle and screw it tight and its done. View detail
z650rs Over Racing rear axle slider
In the picture included, the rear axle slider is attached to the top of the bolt that holds the rear wheel. This is possible because the z650rs has a hole in the rear axle unlike in the other z650 lineup. It is an easy install and the sliders looks and feels well made. View detail
Front fork protection?
I personally like it better than other Manufacturer and it looks good. View detail
For peace of mind.
Purchased the product because it was equipped with Over Rear Sets and Sliders.
The sense of unity has been improved by matching the logo,
The product was easy to install without being too subtle, and it was easy to install, but I applied a little Locktite just to be sure,
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1200DAEG, YAMAHA XJR1300
Exclusive Design
It came on without any problem because of Exclusive Design.
It is installed by insurance.
I would be careful not to use it.
View detail
Good !
I appreciate the good stuff. Although the delivery period has been getting longer ... Satisfactory items have arrived. View detail
good
I received it very well. The shipment was very long due to the local circumstances in Japan, but it came packed safely and well. Although it is not yet fitting, I am not worried about the famous product. Thank you for providing good products at great prices. View detail
It came in handy when I was standing in a goggle
I was surprised by a car that came out at UTurn and I applied FBrake and knocked it down with BaTan Injuries were only intact, such as the RearSwing Arm and Caliper
There are only a few scratches on the DURACON part of the Slider, and as long as we keep our eyes closed for scratches, we can still use it Le state
I don't want to test how well it works in a fall at speed, but it's better to do the damage than not It's going to keep you in check
View detail
Fits: YAMAHA MT-09, YAMAHA XSR900, YAMAHA MT-09 To Racer
It is a shadowless staff
RearBrake Caliper, Sprocket If it becomes protection around, it is simultaneous purchase before and after.
Installation is not particularly difficult, but Bolt nut head is getting in so 12 mm Socket wrench is Quantity : Installation with 2pc is easy.
Should you fall, Right Side is an Exhaust System, Left Side is footpegetc. Although I do not know if there is much effect as it installs first, but I do not know what kind of way of falling so I installed it.
It is somewhat expensive but it is generally satisfying as a cane.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 TRACER, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-09, YAMAHA YZF-R7
It is a shadowless staff
Front brake caliper at the time of falling After thinking about protection around for Shaft purchase,
Especially Quantity : Banjo protruding by 2 pc tightening is appreciated when the Left Side is protected.
Installation is not particularly difficult, but as the head of Bolt nut is getting in, 12 mm Socket wrench is Quantity : I think work is quick if there are 2 pc.
Actually left to the Left Side, but Slider on the car body side was able to be cut, but this was not scratched
There may be no effect except when it fell fairly hard.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 TRACER, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-09, YAMAHA YZF-R7
Good feeling
This time we purchase both Front and Rear, the quality of the product is also good Performance as a Slider ... I do not know, but easy to install, Total 15 minutes, after installation a little conspicuous feeling View detail
A little Is it high?
A little I think whether it is high, but the making is solid and there is a sense of security. I can not understand the performance of Protection because I can not try it. I will try hard so that this female does not work. View detail
With Front and Set
Since there was Type of 2017, I bought it together with Front. I like it like Front. Rear is easy to install and can be done in 5 minutes! View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 TRACER, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-09, YAMAHA YZF-R7
Do not insist too much
I chose by casualness that I insist too much. Parenthesis is nice with Simple. Circuit Because it is not running, I decorate it and I think it is a high ornament
Installation is easy and can be done in as little as 5 minutes
View detail
Fits: YAMAHA MT-09, YAMAHA XSR900, YAMAHA MT-09 To Racer
I will not arrive at MODEL in 2017.
It was conformed to the 16 year MODEL of MT - 09, but I bought it because it would have been unchanged since it was 17 years MODEL, but I had a blind spot. Because Rear under Fender was newly adopted, Axle Shaft of the Bracket's thickness was lengthened. Of course Stud bolt was short, so I bought a long Bolt at Home center and installed it safely instead of Stud bolt. View detail
Fits: YAMAHA MT-09, YAMAHA XSR900, YAMAHA MT-09 To Racer
Guard done!
FAxle Slider installed the K-FACTORY product, but since the company did not have a Rear Axle Slider for MT-09, we decided on this product considering other company's products. Shape is also good, DURACON Black and Material : AluminumColor Silver's Contrast is COOL.
No problem with installation, 12 mm Box wrench is Quantity : It can be done easily with 2pc (Double-end Wrench is impossible).
Although CrankcaseSlider is Y'sGEAR, Frame slider is DAYTONA, FAxle Slider is K - FACTORY, and RAxle Slider is OVER, all four Sliders have become different products, but there is still unity and it is perfect. Burkbuster of SW-MOTECH is attached to Hand guard, Radiator core guard is made by Etching factory. The guard plan for MT - 09 is complete!
...... However, as the former OFF ride, Under Guard is wanted nowadays this time ... ... I think MT - 09 is SUPER MOTARD, somewhere for MT - 09, "Under Cowl" Not Material : Aluminum's "Skid plate" Would you mind making me?
View detail
Fits: YAMAHA MT-09, YAMAHA XSR900, YAMAHA MT-09 To Racer
Is it necessary to run Closed on MT - 09?
I bought it for the fall in case of running.
When examining variously, MT-09 has a high possibility that Damage will go to Swingarm when falling over. I installed it for Swingarm protection.
Quantity : Pair (for Left and Right) Overhang amount is different, Over think firmly - I guess I designed it.. I hope to protect Exhaust System and footpeg.
It looks grainy and rugged, but it seems to be able to function. For Dress-up purpose we recommend purchasing more colorful things.
I wonder if the price feels a little expensive. I wonder if it is about half the price.
Mounting is very easy, only tighten the M8Nut with a 12 mm Socket wrench. Especially there is no Torque designation. However, 12 mm Socket wrench is Quantity : 2pc. Set is necessary, so if you do not have it you will need to run to the Home center. One thing that gets in mind at installation is that we are using Lock nut, but Shaft's Length is not delicately enough and One Side has not reached the lock part. With this, the precise locking mechanism does not work effectively. Quantity : P
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 TRACER, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-09, YAMAHA YZF-R7
Fallen cannibals
I bought it for the fall in case of running.
Quantity : Pair (for Left and Right) Overhang amount is different, Over think firmly - I guess I designed it.. It looks grainy and rugged, but it seems to be able to function. For Dress-up purpose we recommend purchasing more colorful things.
I wonder if the price feels a little expensive. I wonder if it is about half the price.
Mounting is very easy, only tighten the M8Nut with a 12 mm Socket wrench. Especially there is no Torque designation. However, 12 mm Socket wrench is Quantity : 2pc. Set is necessary, so if you do not have it you will need to run to the Home center. One thing that gets in mind at installation is that we are using Lock nut, but Shaft's Length is not delicately enough and One Side has not reached the lock part. With this, the precise locking mechanism does not work effectively. Quantity : Pair (for Left and Right) We adjusted the amount of tightening and installed it, but I think it would be better to improve.
View detail
This is a good product, best price-performance ratio. Excellent quality at affordable prices and fast delivery very pleased with the results of wibike. It is certainly a product that protects the rear undercarriage when she fell.
This is a good product, best price-performance ratio. Excellent quality at affordable prices and fast delivery very pleased with the results of wibike. It is certainly a product that protects the rear undercarriage when she fell. View detail
Fits: YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA YZF-R25
I got this for my friend and they bought the full slider of OVER...front, rear, and middle... alot of people bought this well they liked it alot good price when it was on sale and good quality
I got this for my friend and they bought the full slider of OVER...front, rear, and middle... alot of people bought this well they liked it alot good price when it was on sale and good quality View detail