Reviews
countermeasure against standing up
Coloring also matched Cafe in Black??Gold.
We won't know the effect until we take it down, but installing it as an insurance policy gave us great peace of mind.
View detail
Risk Reduction
[How is it used?
In case of emergency.
Was the installation difficult?
Remove the NORMAL AxleBolt→attach the included AxleBolt (with a hole for the shaft)→Slideretc. and attach the rest of the parts. If you have a Glasses Wrench and a Hexagonal Wrench, all you need to do is to follow the instruction manual. It took me about 10 minutes to do it.
How was your experience with it?
If you look closely, there is a small gap between the brake side bolt and the gold base plate, which is not a good parenthesis.
But overall, I am satisfied with the Dress-up and everything else.
I'm glad I put it on." I hope that the day will never come when we will be able to do so.
View detail
Fits: HONDA CB1300 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA X-4
k-factory stuff was always good
The left and right sliders are very light and neatly injected. It's simple to install it by putting it in the left and right holes of the front axle. I have z900rs, but I changed the front suspension to raise up light I bought it for cb1300sb and installed it. The middle gold metal ring has a very good design. View detail
No worries in case you fall down!
[How is it used?
I purchased this car so that I can drive it safely even if I fall down when I go on a long trip, such as touring destinations.
Was the one you received as per Image?
Quality is as good as the Image.
The precision of the screws and pipe lengths, etc., were fine.
Was the installation difficult?
It was a complete Bolt On.
I was concerned about the durability of the Axle ShaftBolt since it is a hole type, but when I saw the product, I was reassured that it was well made.
How was your experience with it?
I have not fallen down yet, but it also has a dress-up effect.
[Included Parts:were they on?
Instruction Manual, Bolt, Shaftetc.
[Was there anything that disappointed you?
I am concerned about the durability as it is anodized and may fade in the future due to sunburn, etc.
For Honda models other than CB1100, CB400SF, CB1300, etc.Fork pitch is the same type and can be used with Hollow Axle Shaft by Bolt On. In my case, I use it with 0 pointsShaft and it works fine.
View detail
Focus on appearance
I almost never scrape here when I fall (experienced,, sweat),
Well, I introduced it because I thought it was important to look good.
One point of Gold is nice.
It is also well made.
It comes with a detailed instruction manual and is very easy to install.
View detail
Emphasis on decoration
It was the first product that came out, so I installed it, but it is a little expensive. I was glad that there were no decorative elements in this part, such as the decorative plate on the base or the aluminum collar, which is not visible after installation.
Quantity:Pair (for Left and Right) Note that two sockets of the same size are required because they will be supplied if they are not held from the
I don't know how effective it is because I haven't tipped it over. (I feel that if the bottom case is tipped over in such a way that it is damaged, it would not be enough to protect Axle.)
I think it would be easier to attach and detach if one side is fixed, but I don't know why.:Pair (for Left and Right) It is a hassle because you have to hold it down from the
View detail
Nice fit.
Slider fitment can make the front lower part look more solid and fuller. insurance that will protect against unexpected damage. View detail
I think it's the Front Axle Slider from Best Buy.
Someone has already written a Review, so here is another perspective.
Front forkBottom and Brake Caliper are not affordable to replace with Wound.
But when I tried to buy a Slider for that purpose, it cost me 15,000 yen for two small chunks of DURACON and a mere stick of All Screw in a Vinyl bag. I was like, "Are you going to pay 15,000 yen out of the small amount of money you have in your pocket? It was an Image like that.
The quality of each part is so high that it can withstand the act of looking at it next to the PC until the day of installation after it arrives.
The shaft is not just an all screw, but a machined aluminum alloy shaft, so I did not use the included stainless steel screw, but prepared a separate Duralumin screw to assemble the shaft.
This is a great QUALITY product as others have stated in their Reviews.
Before purchasing the product, I was a little concerned about the Logo, which is often noticeable in photos, but in reality, it is a small one, so it is not particularly noticeable.
Anyway, we strongly recommend this product to those who are not sure which front fork slider to choose.
View detail
Smaller Accent
The small accents and gold on the feet are very effective. I hope this Parts will never be active …. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA
Kayfak BirdFront Axle Slider
I bought it because I like the Anodized in Gold. the Gold is not too dark. I think it has excellent protection against falls. View detail
Z900RS CAFE Don't miss the 2023 color!
This would be the kind of product that is for the Z900RS CAFE 2023 color.
I like the elegance of the color distribution that is not all Gold.
View detail
Fits: SUZUKI BANDIT1200, SUZUKI BANDIT1200S, SUZUKI GS1200SS
If you think it looks good, buy it.
Are you glad you put it on when you have an accident?
I hope this doesn't prove to be useful.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI NINJA ZX-14R
K-FACTORYAxle Slider
I've been using K-Factory's Slider for years, and it's quintessential quality! Beautifully built! No doubt about it! View detail
Is it a feel-good product?
It is easy to install, but is it just a slider? It is very short and small. It seems to be not so effective when it tumbles down. It is not very noticeable, so it looks good. View detail
Z900RS 50th Fork Slider
I installed it on my Z900RS 50th with the purpose of dress-up and to emphasize the appearance. View detail
Best for Z900RS 50th
I installed it on my Z900RS 50th as a part of dress-up rather than as a fork slider. The color match with the gold wheel very well and it was a large success. It looks very Parenthesis. View detail
KATANA 2022, Gold color is MATCH!
I bought it not only because of its function as a Slider, but also because I liked the way it looked.
I like the look of the KATANA because the front fork is Gold for the 2022 model year, so it has a MATCH look.
I don't know how effective it is as a Slider yet, since it has not been rubbed.
The installation itself is easy, but the Hexagonal Wrench is a Quantity:2pc required
View detail
Design is very contemporary and up to date in function.
This axle slider is of exceptional build quality. Packaging is exquisite. Fit and finish is top notch! Design very beautiful in form and function. I like the way they anodise the metal on this set. Nicely done and will compliment a lot of bike colour schemes. View detail
Safety and aesthetics
I was able to install it successfully using the KITACO front axle shaft.
I feel like I'm on the edge with the KITACO Nut. I think I'll replace it with the supplied Nut.
It will definitely protect the car body, and it will also hide the Axle Nut and other parts, which may improve the aesthetics a bit.
I haven't tumbled over it, so I haven't been able to check its protective performance. The product is within my expectations.
View detail
Fits: KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZRX1200, KAWASAKI ZRX1100
Look number one!
Looks are important! The texture is as good as it gets.
Now we just need to figure out how durable the Gold alumite is!
The Axle Shaft is hollow, so it's a good item for plugging holes, and it's a recommendation for people who use the zrx fork.
View detail