Reviews
Fits: SUZUKI GSX1300R HAYABUSA
22 HAYABUSA It would be nice to have a 1/4Socket for installation.
This is a general type of Penetrating Axle Shaft.
The 13mm lock nut is tightened with Both Sides, but the entrance is narrow and it is difficult to reach the nut with 3/8Socket. 1/4Socket can easily enter the nut and tighten the lock nut.
It is recommended to work with Socket, which is thinner in thickness.
View detail
![Rear Shaft Protectors 【Rear Axis Protectors]](https://global.webike-cdn.net/uiu/impression/202110/13_1018910_6166f1c7a138b.jpg)
Cost-effective choice
The first time you buy this brand, the price is more favorable than other brands. The style and performance are good. There are many colors to choose from, which can be matched with different colors. Please note that you need to bring your own hex key and a pair of socket wrenches when installing. Twist both sides at the same time.
The overall packaging of the goods is good, and there is anti-collision material filling protection in the logistics box. -------------------------------------------------- -------- For the first time, buy this brand, the price is more than other brand discounts, style and meticulous colors, can meet different color body with match, please pay attention to the installation before buying, you need to bring your own hexagle and a pair of sleeve panels. 2 is twisted at the same time.
The cargo pack is overall, and there is a collision material filling in the logistics box.
View detail
![Front Shaft Protectors [Front Axis Protectors]](https://global.webike-cdn.net/uiu/impression/202110/13_1018911_6166f2a07bcbe.jpg)
Cost-effective choice
The first time you buy this brand, the price is more favorable than other brands. The style and performance are good. There are many colors to choose from, which can be matched with different colors. Please note that you need to bring your own hex key and a pair of socket wrenches when installing. Twist both sides at the same time.
The overall packaging of the goods is good, and there is anti-collision material filling protection in the logistics box. -------------------------------------------------- -------- For the first time, buy this brand, the price is more than other brand discounts, style and meticulous colors, can meet different color body with match, please pay attention to the installation before buying, you need to bring your own hexagle and a pair of sleeve panels. 2 is twisted at the same time.
The cargo pack is overall, and there is a collision material filling in the logistics box.
View detail
RearShaft protector
Bought this for my 2021model PC40. It looks good and I am satisfied.
An ultra-thin 13mm long socket is required for installation.
View detail
FrontShaft protector
Bought this for my 2021model PC40. It looks good and I am satisfied.
An ultra-thin 13mm long socket is required for installation.
View detail
You look better, etc.!
If you've ridden a Z900RS, you know what I'm talking about.
I found this product and bought it immediately because I was concerned about the appearance of the Nut being bare.
Nut's hiding upstairs, etc.!
View detail
It's solid
In the product information photo, there was an Axle Shaft, but it was not attached, but I was able to install it without any problem. The texture is not bad and the only problem is the strength. View detail
Fits: KAWASAKI NINJA1000
I'm all about the look!
Good work for a low price. (Excuse me) It's a good product. If you have a 10mm socket, you can install it. I think it's better than OEM! View detail
![RearShaft protector[Rear axis protectors]](https://img.webike-cdn.net/catalogue/images/41365/PK2_pict_000_web_TS.jpg)
Watch out for tools.
I like the thing very much, but be careful when replacing it, because the Socket doesn't fit depending on the thickness of the Socket.
I've never beaten it yet, so I'm setting the protection at 3 for now, and I don't know how effective it is. (I'd like to remain unsure for the rest of my life, though …)
I like the Slider because it makes it look cooler.
*For your information.
The tool is a Vessel T-type Socket set.
If the Socket is less than the thickness of this Socket, I thought it would be Large sturdy.
View detail
Fits: SUZUKI BANDIT1250
Just in case.
I purchased and installed it to protect it in case it falls over. It's easy to install and gives me a sense of security. Fortunately, it hasn't fallen over since I installed it, but I am satisfied with it. View detail
Just in case.
I purchased and installed it to protect it in case it falls over. It's easy to install and gives me a sense of security. Fortunately, it hasn't fallen over since I installed it, but I am satisfied with it. View detail
Cover at Front and Rear
For SpindleGrip to keep Damage to the Smallest Limit in the event of an accident It is used as a crash protector and can be installed on both the front and rear wheels I feel like we have a system in place to
The black color is comparable to the black body of the car, and the design is excellent I think it is Installation can be done easily with 13mm BOXWrench I referred to the photograph of the installation example attached to the product description column of the Web I am very happy with the performance I would recommend this product as a precaution against crashes, which should not happen It is
View detail
Fits: YAMAHA MT-09 TRACER
I'm glad I put it on the Rear, and the Front too
It's for MT-09, but you can also install it on the Racer 900GT without any problem
I installed the Front as well because I liked the way it looked on the Rear
Installation is easy with two 13mm Socket wrenches, but you can use a little bit of One Side If you don't tighten it more, the length from Nut will be snarled
I don't know what Protection is, as I've never actually sledged
It took me about half a month to deliver it, but I'm happy with it because it's a good cosmetic product
View detail
It guarded well
Installed on the rear axle (M's Slider is also installed on the body) Corner exit at about 90km speed, SlipDown due to too much Axel dawn, and I skied for about 20 meters, but the Cowl was only a Small scratch and the Swing Arm was intact It's done
I'm still going to use it for my next fall without replacing it
However, it took about two weeks from the time I ordered it to arrive to see if it was shipped from overseas
View detail
Fits: YAMAHA MT-09 TRACER
I bought it for the cheapest price and it's good!
I installed it on my Racer 900
I wasn't sure if I could install it on MT09to Racer, but I was able to install it with no problem I could
It only takes about 10 minutes to install, and the design is simple and I like it so much that I ordered the Front as well It's a good idea
Protection has not been taken care of (and I don't want to be), so I gave it 3 stars
View detail
visually satisfied with the appearance of
I installed the Front as well as the Rear, but it is not too large, and I think it is just right large It's not bad looking The instruction manual is also available in English It was very easy to understand and install Now I can customize it again in a classy way The.. (*^^*) It was self-satisfying! View detail
![Rear Axis Slider Guards [Rear Axis Protectors]](https://global.webike-cdn.net/photo/impression/0a/0a74d283e7af479f23d48c3399067d9aL.jpg)
Looks OK
I'm not sure if it's a self-satisfied, good looking product or not, but it's not large, and it's a very nice and customizable product All the Instruction Manual was in English version There is a diagram of the installation of the "M" and "M", so anyone can understand it just by looking at it View detail
I bought it at a special sale, so it was a great costumer!
I had the Motorcycle shop put it on before delivery It was 2km from delivery and it was the middle of winter + Brand new Tire + Left turn + crosswalk White Line SlipDown in combination with White Line SlipDown (xox)
In combination with the Engine Guard, which is installed separately, it did a good job It was not able to reach Large Clutch lever bent, but (^^;
In terms of the amount of gold purchased, the costumes are not too bad
However, according to the motorcycle shop, it seems to have been installed to the Limit, so be careful about looseness and such It's only subtle to the point that I was asked to put it on
View detail
Included Parts : Shortage
MT-07 (2018) A ride. There was no problem with the installation of this product. However, the cap cover of the hexagonal screw that fixes and fixes the product was not included. Inquiries, about 3 weeks waited for the answer "Although the front has a cap, since the size of the left and right screws are different, the cap is not originally attached because it is the rear" And.... Hmm?... It was that kind of feeling. If my eyes are decent, the product picture has a cap attached. What's more, what's included in the same product for the front for accessories and for rear for not included? "Takaka cap is about" Did it seem so?. There is no item that is supposed to be there.... Although there was sense of incongruity in answer content, I thought that there was no decent answer, no correspondence, I give up more than this. Even if it is a product made in a foreign country, how about just passing along the answer received from the manufacturer.... However, indeed I am sorry if there was no cap for the rear, so I think if you can post the presence or absence of the screw cap cover included with other MT-07 rides purchased this product. I think the product itself is a good one. View detail
for Front is perfect
It is used for 2017 YZF-R6. Easy to install! Material is satisfactory, Large is also exactly good. For installation the 14 mm Wrench is Quantity : 2pc is required. The manual is English version but I do not think that it is necessary. The problem is for Rear - - - View detail