Reviews
**EXCELLENT SERVICE**
About quality and texture of the Honda NC750X Centre Stand was excellent. Difficulty of installation..Not difficult at all. Install went well, easier with two people. Only took about 15 minutes. Cost performance and comparison with other products. Honda product fitted perfectly. About shipping and packaging. The centre stand was packed well and shipping was quick. It took only five days to arrive.Very happy with the new centre stand. The stand makes it a lot easier with maintenance on the bike.. Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
I knew I wanted a Center Stand.
As expected, OEM Product View detail
Fits well on NC750X DCT 2023
Received the order within the week via EMS. Item fits well on my NC750XDCT 2023. Workshop installed the stand and works perfectly although the bike is generally heavy thus can be difficult to mount/dismount. Highly recommended. View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
Cb400Sf main stand
Wow item is very easy to fix and solid too. Shipment is fantastic! Super fast shipment! Definitely will purchase more! Thanks Webike! View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
The upright position gives it a nice old car feel.
[How is it used?
?When I do some tinkering with my motorcycle, it is easier to work and clean with a center stand, and I thought it would be better for my motorcycle to be upright.
Was the one you received as per Image?
It was more solid than ?Image. I think it is indeed OEM.
Was the installation difficult?
?Rubber was hard to screw in, so I applied detergent and put it in a vice.
?I had referred to a YouTube video on how to install the spring, so I shaved about 3mm off the spring and bought a tool to pull the spring beforehand.
?Spring was attached by pulling at the end, but it took a lot of force and was tough. I bought a tension spring hook just for this.
How was your experience with it?
?Of course it's very nice; you pull up the Grab Bar while putting your weight on the protruding part of the STAND, which is quite heavy. But I feel secure because I'm not standing on one leg, but standing firmly.
[Included Parts:were they on?
?I had everything in order. I prepped everything on YouTube to see where and how to use it.
[Was there anything that disappointed you?
?Motorcycle is used but the Center Stand and Engine Guard are new, so it looks almost like a new car at a glance. I am glad it is as I expected.
?No disappointments at all. The only thing is the high price.
■Points of installation and hang
?Spring should be hooked up and installed last. Also, the Spring pulling tool costs 500-600 yen, so you should definitely buy it in advance. It is quite difficult to do because there is an exhaust system nearby.
Availability and clarity of Instruction Manual
?I don't think there was an Instruction Manual to begin with. Everything was taught on YouTube.
?Honda, please thank YouTube for their help.
Notes
?I don't want to knock over the Motorcycle by doing something wrong in the first place, so I always hang a chain block from a beam in the back of the ceiling. (Chain block was bought to move garden stones.)
Again, using the Chain block, Quantity:Pair (for Left and Right) I put a rope through the bolt at the top of the rear shock of the motorcycle and lifted the rear of the motorcycle up to make it easier to work with. Also, at first, I asked my wife to stay on the other side of the motorcycle so that the motorcycle would not fall over. It is good for those who have a variety of tools, but those who work with a minimum of tools need to be careful not to let it fall over.
? There is a Motorcycle shop on YouTube that has installed a Center Stand on a CB400SB, and you should definitely watch that and learn before you do it. Also, he is very skillful and lean.
Items to buy together
?Tension spring hook (like a spring puller)
?In my case, it is an early NC42 CB400SB, so I needed Grinder or sandpaper.
Opinions and requests to ■Manufacturer
? On YouTube. Instruction Manual contains …" but the flimsy Quantity written in English Version:It only contained 1pc. of paper. the Motorcycle shop on YouTube was much clearer.
?Motorcycle is a used 2011 model, so I originally planned to buy a cheap used Center Stand and install it, but there are few people who can buy the Center Stand Body at a reasonable price, but I couldn't find the SpringOthers' Included Parts:Quantity. However, I could not find many people who were selling them, and I could not find any other Included Parts:Quantity other than the Body.:I don't know where Set is sold, so in the end, even if I could buy Center StandBody for 3000-4000 yen, I had no choice but to buy it new for me, because I couldn't do anything if I couldn't get decent Included Parts:.
?? Also, there is no mention of Center Stand in the Parts catalog or anything, so it still seems that Included Parts:is hard to get, and it is hard to understand how to install it, and if Motorcycle shop can install it for about 3,000 yen, from today's experience If a motorcycle shop can install it for about 3,000 yen, I think it is cheap enough. But if they say 5,000 yen, I think it is a bit expensive.
I think it is still a great product as an ?OEM Product.
?It would be helpful if you could mention the OEM Center Stand in the Parts catalog if possible.
View detail
Re-Thailandia by installing
I downloaded the Instruction Manual from the enclosed QR code and was able to understand how to assemble the center stand, but when it came time to assemble the spring, it took a lot of force to attach the spring and I had to pull it on with a needle gold. When I installed the body, I had to go to a motorcycle shop to have the side stand and footpeg removed because they were screw-locked and I could not loosen the screws with the tools I had on hand.
The feel is that the vehicle is high to begin with, so when the STAND is put up, it becomes much higher.
I was a little more afraid of standing up and stumbling when I folded it than when I stood it up. However, Motorcycle's maintenance is easy and safe in every corner.
As a result, touring became more enjoyable, and cleaning the chain and wheels and waxing after returning home became easier, so we are glad we installed the new equipment.
View detail
Re-Thailandia by installing
I downloaded the Instruction Manual from the enclosed QR code and was able to understand how to assemble the center stand, but when it came time to assemble the spring, it took a lot of force to attach the spring and I had to pull it on with a needle gold. When I installed the body, I had to go to a motorcycle shop to have the side stand and footpeg removed because they were screw-locked and I could not loosen the screws with the tools I had on hand.
The feel is that the vehicle is high to begin with, so when the STAND is put up, it becomes much higher.
I was a little more afraid of standing up and stumbling when I folded it than when I stood it up. However, Motorcycle's maintenance is easy and safe in every corner.
As a result, touring became more enjoyable, and cleaning the chain and wheels and waxing after returning home became easier, so we are glad we installed the new equipment.
View detail
I was worried about it for about 6 months and finally put it on.
I had read the reviews of the senior members saying that certain parts would come later, but I still don't know what they are talking about until I actually do the work myself.
I was at my wits' end, thinking it would be impossible while following the Instruction Manual and changing the order of Spring, when I thought of that and re-read the Review...
I wondered if this was it? I tried it once by removing Rubber's Cushion, and it was installed so quickly that I wondered what all that trouble was about!
There have already been many reviews by senior members, but I dare to write this for the sake of those who are going to be involved in this project.
The Rubber component that is inserted into the middle hole is the last one.
ChainMaintenance has become overwhelmingly easy.
You're right that the Side Stand is hard to take down, as is often pointed out, but once you get used to it, it's not that hard!
Simply put, instead of avoiding the Center Stand and unloading the Side Stand, just lick the Center Stand, or rather, unload them together.
Better to buy it and put it on than to hesitate.
This is one such product.
View detail
Excellent OEM Centerstand
Installed on a 2014 Honda CTX700. Bikes should come with centerstands from factory we all know this. Especially if they have the mounting points for them. Finding one for this bike was unusually difficult. Retailing at around $200 + shipping. This was a cheaper option at $150 with the chain stop shipped. Not to mention Honda built. Can't go wrong. Now brakes jobs and chain adjustments are a breeze. View detail
main stand
good~
It is said that you must write at least 100 characters.
The center stand paint condition is good.
It's lighter than you think.
It's not installed yet
Installation doesn't seem difficult.
And the delivery is really fast haha
I will have to recommend it to others around me.
-------------------------------------------------- -------- Good It is said that it should be used more than 100 characters. Center stand stamp is good. Lighter than I thought. It's still before mounting Installation doesn't look difficult And delivery is really fast haha I should recommend it to others around. Powered by Google Translator
View detail
Useful for daily maintenance
I feel that it should have been included from the beginning, but since it is relatively inexpensive, I did not hesitate to install it.
It does not feel that heavy to lift, so I think it is well made.
This makes ChainMaintenance much easier.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
It could be used with DAYTONA's Saddlebag Support.
Material:Stainless Steel and rust free, could be used with DAYTONA's Saddlebag Support. View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
Good product for CB400SF, Revo 2019 model
Product fits nicely without the need to remove the exhaust pipe. The tech fixed it up in 10 mins and commented the ease to fix it up compared to those after market main stand. View detail
Highly recommended OEM item
Highly recommended, Stand is easy to fit as it is an OEM item both the correct holes and mounting for spring are already there. As another reviewer stated fit the rubber stop last (great addvice). Delivery was super quick within a few days from Japan amazing. View detail
suzuki gsx s 125 center stand
really glad i purschased this stand. really can't understand why suzuki gb stopped importing this item. I ordered expecting a long wait with japan being along way from uk! I was wrong they posted it stright away on the 8th and i received it today 13th june! quicker than alot of parcels sent witin the uk. I had read the reviews on here and like another customer commented leave the rubber stop until the last job as it makes it alot easier putting the spring on which i wrapped a piece of old electric wire round it and easily pulled it on. only took me 5 mins from start to finish,and probably only 2 mins if i had to do again! very happy with it.I can now see my oil and coolant level just by glancing down at them,and just gave the bike a wash and leather,it was so easy with it been upright! if your thinking of getting one stop thinking ,just buy it!!! View detail
Center Stand is a must-have equipment
To save on installation labor, I did the installation myself.
The installation process was more time-consuming than expected due to interference with the rightfootpeg.
At first we could not hang the Center Stand at first because of the weight of the Motorcycle.
I learned how to hang Center Stand on YouTube, and after practicing a few times, it became easy.
Center Stand is essential equipment because it makes ChainMaintenance easier.
View detail
Essential accessory for the Yamaha TDM 850
The main stand kit arrived in 7 days by EMS, well packaged and boxed. Everything needed for fitting the stand is included in the kit, with clear instructions in English. The stand and fitting brackets are well made and fit together easily. Some ground clearance is lost due to the brackets protruding beneath the exhaust system, but for a road bike it's not a problem. Overall I am very pleased with the stand kit. I would recommend it as an essential accessory for the TDM. View detail
As expected
Main stand is essential for maintenance.
I had changed the Exhaust System to Other Brand Product, so I wondered if I could install it easily.
I had my doubts, but it was OK without processing.
It does not interfere with the exhaust pipe.
Installation is difficult for beginners because it is difficult to install Spring.
Be careful not to get hurt.
View detail
I feel more centered!
Shouldn't all chain drive bikes have a center stand as stock? I think so, so I added one to my 03 Honda CTX, and I am very happy with it. I looked up some videos on Youtube to help with the process, and it all went well, although securing the spring was more difficult than I thought it would be. A ratchet strap did the job, but the spring is really tight. Overall, I appreciate Webike's price and shipping. I got the stand stopper as well, it's essential for my bike. View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
The construction is solid.
Other manufacturers seemed to have similar products, but we chose this one because it seemed to have a good reputation. The price is a little higher than other manufacturers, but I am satisfied with the quality. K&HSeat since purchase (Low seat) I was planning to exchange it for a new one, so I thought I would match it with the design of the new one. View detail