Reviews
Fits: HONDA CBR1000RR, HONDA CBR1000RR, KAWASAKI Ninja250, KAWASAKI Z1000 (water-cooled), KAWASAKI NINJA1000 (Z1000SX), SUZUKI KATANA, KAWASAKI ZX-25R, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR954RRFire blade, KAWASAKI W800, KAWASAKI ZX-10R, SUZUKI B-KING, SUZUKI GSR400, SUZUKI GSR600, SUZUKI GSX-R1000, SUZUKI GSX-R125, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000
As a Slider?
Purchased as Stand Hook.
The product does not look that large in the photo, but my first impression was that it was larger than I expected.
It is named Slider, but there is no expectation other than Stand Hook for GSX1300R HAYABUSA.
The key is that it is easy to use as a Stand Hook.
Used in Dynamoto's STAND. Solid.
View detail
Acts as a Guard. Fade resistant
It is a Stand Hook of a fairly Large size.
The color purchased is Gold; it is a somewhat bright Gold color as shown in the product image and has not faded in the 4 years I have had it on. The weather resistance is quite high.
It functions well as a Stand Hook, and the large size makes it easy to hang.
It also functions as a guard in the event of a fall. In fact, it also works as a guard in the event of a large fall, and a large down type exhaust system was able to survive with only a small scratch.
I was afraid that the Swing Arm side of the support would bend, but the material itself is soft and the large size makes it firm and secure. "Spinning away." The Swing Arm side did not bend.
I used to use MORIWAKI's product, but the catch on the Swing Arm side bent even after a light fall (after that, I replaced the Swing Arm and started using this product).
I can recommend it because it stands out rather prominently due to its large size and color, and it is inexpensive as well.
View detail
Just right Size
I have used it in STAND for J-TRIP and it was a very good Size. View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, KAWASAKI Ninja250, KAWASAKI Z1000 (water-cooled), KAWASAKI NINJA1000 (Z1000SX), SUZUKI KATANA, KAWASAKI ZX-25R, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR954RRFire blade, KAWASAKI W800, KAWASAKI ZX-10R, SUZUKI B-KING, SUZUKI GSR400, SUZUKI GSR600, SUZUKI GSX-R1000, SUZUKI GSX-R125, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000
I like it a lot.
[How is it used?
If the hole of Stand Hook is left open, sand or foreign substance may enter the screw mountain and it may be easy to rust. I use this Slider which can also be used for Stand Hook as a thing to fill the hole because it will damage the screw mountain afterwards.
Installed and used for about a year.
Was the one you received as per Image?
As per Image.
Was the installation difficult?
Installation itself is easy. However, when installed as is, it is very close to the Swing Arm and seems to use more care than necessary when hooking the V-shaped Hook on the Maintenance Stand. A little [Color] I adjusted my 4mm aluminum spacer in between to take out the ClearAlans.
How was your experience with it?
Good for Stand Hook with V-shaped receiver.
It can be used with Stand Hook.
[Included Parts:were they on?
Instruction Manual only.
[Was there anything that disappointed you?
I would appreciate it if the included Bolt was a little longer.
View detail
Fits a 2020 NINJA2 Helmet 50R
2020 NINJA2 Helmet50R (EX250P) attached to the
I just bolt it to the existing hole in the rear arm.
The M10 that comes with the product does not fit the Size.
Please note that you need to prepare M8.
I think the product itself is well built.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, KAWASAKI Ninja250, KAWASAKI Z1000 (water-cooled), KAWASAKI NINJA1000 (Z1000SX), SUZUKI KATANA, KAWASAKI ZX-25R, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR954RRFire blade, KAWASAKI W800, KAWASAKI ZX-10R, SUZUKI B-KING, SUZUKI GSR400, SUZUKI GSR600, SUZUKI GSX-R1000, SUZUKI GSX-R125, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000
Cospar good
I like it because it is cheap and looks Simple.
I have no problems using the rear stand.
View detail
Rear Sand Plate
Was the one you received as per Image?
It's a beautiful color. I wish the color was a little darker.
Was the installation difficult?
Be careful not to loosen or drop it!
How was your experience with it?
No particular problem
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
nothing special
View detail
Your neighborhood AGRAS is the best in the world.
I went to AGRAS in my neighborhood and asked them to install the engine slider, clutch and generator guard on my cb1000rr. The precision of the molding is very beautiful and the appearance of the factory in town is very good. View detail
Fits: KAWASAKI NINJA250R, KAWASAKI ER-4n, KAWASAKI ZX-10R, KAWASAKI ZRX1200, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZX-10R, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI ZRX1100, KAWASAKI NINJA400R, KAWASAKI NINJA2 Helmet50RR, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ZX-10R
Dress-up parts.
I don't have a maintenance stand, so this is just a custom part for appearance. It is very easy to install and you can dress-up your car easily. View detail
It's a high-class affair!
It's only a stand hook holder, but as expected of AGRAS, it has a very luxurious feel to it!
Style and accuracy are both excellent, but the only downside is the high price
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR, KAWASAKI Ninja250, KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-10R, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI KATANA, KAWASAKI ZX-25R, SUZUKI BANDIT1250F, SUZUKI BANDIT1250, SUZUKI GLADIUS650400, SUZUKI TL1000S, SUZUKI TL1000R, SUZUKI SV650S, SUZUKI SV400, SUZUKI SV1000S, SUZUKI GSX250R, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
I like it
It has a V-shaped receiving groove for easy STAND-hooking
It's very handy because I can stand up when I remove the wheel and wash the car
I leave it on after I put it on, but it doesn't come off or interfere with Silencer Mm
Slider is Naming, do you rub this place?
This is a product from Recommendation
View detail
Quality is a sure thing.
I am using it with zx - 14r. It is not used Frequently it looks good Parenthesis is good. The Heelercap of the same Manufacturer is faded with heat and it is useless. View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, KAWASAKI Ninja250, KAWASAKI Z1000 (water-cooled), KAWASAKI NINJA1000 (Z1000SX), SUZUKI KATANA, KAWASAKI ZX-25R, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR954RRFire blade, KAWASAKI W800, KAWASAKI ZX-10R, SUZUKI B-KING, SUZUKI GSR400, SUZUKI GSR600, SUZUKI GSX-R1000, SUZUKI GSX-R125, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000
Although I tried to attach it ...
Good quality and good shape and easy to handle STAND ...
But Large Yeah, Large is too much ...
I used it for a while and swimmersen.
View detail
For RACING use
I bought it for using STAND.
To unify the undercarriage with Blue, purchase with Blue.
Easy installation with Bolt-on.
The color is really good, so you will be worried about fading.
It is very disappointing that Screw is NORMALSilver installed just for good color.
This price is high as it is so it is this evaluation.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, KAWASAKI Ninja250, KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-10R, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI KATANA, KAWASAKI ZX-25R, SUZUKI GSX-S1000, SUZUKI GSX-S125, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX250R, SUZUKI TL1000R, SUZUKI TL1000S, SUZUKI GLADIUS650400
Satisfied?
Previously I was wearing AGRAS, but I have flaked away so I bought a new one this time. Even though RED was a bit more vivid, the shape is not complain. View detail
For Maintenance
Maintenance We purchased this item in order to improve the performance.
Can be installed immediately. Approximately 3 minutes.
When it falls, it bends and breaks.
In a sense, it became a substitute for Slider.
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR, KAWASAKI Ninja250, KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-10R, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI KATANA, KAWASAKI ZX-25R, SUZUKI BANDIT1250F, SUZUKI BANDIT1250, SUZUKI GLADIUS650400, SUZUKI TL1000S, SUZUKI TL1000R, SUZUKI SV650S, SUZUKI SV400, SUZUKI SV1000S, SUZUKI GSX250R, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
It is functional
In doing ChainMaintenance, I was looking for Stand Hook.
I decided on this product on condition that there is trust, which is functional priority rather than appearance priority.
It is easy to install, and it is thought that V letter Hook will not interfere with Swingarm if you attach the included Color.
I will make the price as it is, but it looks pretty, but I am very happy.
View detail
Large I'm satisfied..
USSpec. Because there is no Center Stand in zx - 14r of, ChainMaintenance was Large strange.
When purchasing Maintenace Stand, I bought this item together.
It looks gorgeous because it makes it to Gold with colors with other Parts.
It's simple and extremely satisfied because we only screw Screw installation.
View detail
I installed an universal part that worked as a stand hook and a slider. It was for protection against fall, but considering its height, I don't think that it is going to get scraped. So I guess this part is more or less for decoration.I can't expect m
I installed an universal part that worked as a stand hook and a slider. It was for protection against fall, but considering its height, I don't think that it is going to get scraped. So I guess this part is more or less for decoration.
I can't expect much because it is an universal part, but there is almost no clearance between the stand hook, for the cross section of the swing arm is oval. I am thinking of buyin an aluminum spacer with height aside from this part.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-6R, KAWASAKI ZX-12R, KAWASAKI ZRX1200, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1100, KAWASAKI ER-4n, KAWASAKI NINJA400R, KAWASAKI NINJA2 Helmet50RR, KAWASAKI NINJA250R, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZX-9R
the result of having worried about the product made from a YOSHIMURA, and which being used -- -- white The AGRAS made from a DURACON was used. It is good and satisfied, although it is somewhat comparatively high-priced. Or [ that bl
the result of having worried about the product made from a YOSHIMURA, and which being used --
-- white The AGRAS made from a DURACON was used.
It is good and satisfied, although it is somewhat comparatively high-priced.
Or [ that
black was also good again although white became an One point and was conspicuous ]?
View detail