Reviews
Fits: Others , KTM 1190 RC8R, KTM 1190 RC8, HONDA CBR954RR, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR1000RR-R SP, HONDA VTR1000 SP1, HONDA VTR1000 SP2
Casual Dress-up
For Front Axle Slider and Engine slider
I have Babyface on and a Stand Hook.
The same Manufacturer is used for this product.
View detail
Fits: DUCATI SCRAMBLER FULL THROTTLE, DUCATI SCRAMBLER CLASSIC, DUCATI SCRAMBLER ICON, DUCATI SCRAMBLER URBAN ENDURO
Easy Stand Hook installation
Stand Hook is very useful for chain maintenance and other work with the rear tire in the air.
This product was easy to install, just tighten with a Hexagonal Wrench, and it worked without any problems.
The product looked great and was satisfactory.
View detail
Compatible model
It also arrives at cb750 rc42. View detail
Fits: Others , KTM 1190 RC8R, KTM 1190 RC8, HONDA CBR954RR, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR1000RR-R SP, HONDA VTR1000 SP1, HONDA VTR1000 SP2
Logo is Cool
Material:The Aluminum ones look worn out after use,
I looked for it among DURACON's things.
After all, the Logo is Cool.
View detail
It is a good product
I purchased this product because I was concerned about working with the Shoulder Type since the Motorcycle Axle is not hollow. There is no problem in installation. I don't think it will come off with the Y-type Hook. The quality is quite good, but the price is high. If it were a little cheaper, it would be easier for people in need to get their hands on it. View detail
Fits: SUZUKI GSXR125, GPX DEMON150, KAWASAKI Z125, HONDA GROM, HONDA Monkey
I installed it and Parenthesis is good.
I installed it on the Grom
Parenthesis is good
As for the function, it helps me with standing up.
View detail
Fits: Others , KTM 1190 RC8R, KTM 1190 RC8, HONDA CBR954RR, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR1000RR-R SP, HONDA VTR1000 SP1, HONDA VTR1000 SP2
It is also a good product
After considering several products, I chose Baby Face. Again the quality is very good
It fits the 2023 katana well, so don't worry and order it. It seems to be convenient for chain management
It is a good item and not too expensive. WeBike is also reliable in shipping ------------------------------------------- --------------- I was worried about various products and selected baby face. After all, the quality is very good It's a good fit for Katana in 2023, so don't worry. I think it can be convenient when managing chain The price is not burdensome and it is a good item. Webike is also reliable Powered by Google Translator
View detail
Used for JC92Front
I installed this on a Grom JC92Front. The Right Side Axle Nut of the JC92 is a UNut, so it is very tight. I couldn't turn it with a normal ratchet handlebar, so I extended the Spinner Handlebar + handle with a Pipe.
The Right SideAxle Nut has a 19mm socket, but I was a little worried.
View detail
As Axle Slider
As Axle Slider,
I purchased it in the hope that I could use it as a Stand Hook.
It is strictly as Stand Hook.
Maybe JTrip's Hook receiver would work.
It is not easy to find a receptacle of this size, and Rear
There is no point in using it around.
It looks good, it will be One point.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA MT-10
Maintenance Stand was a durable VPlate receiver.
The maintenance stand I am currently using is a durable VPlate stand, so I decided to use Babyface's Swingarm Stand Hook V Type Black (I thought it would be better to be inconspicuous), which is a very good quality and cost-effective product! The Hook is very easy to hang and can be used by one person! I am also considering changing to a Torx type bolt with a tamper-proof mechanism to prevent theft of the single body parts. View detail
If you've just seen it, I recommend...
[How is it used?
Purchased to use Maintenance Stand.
Was the one you received as per Image?
As per Image. Cool.
Was the installation difficult?
It interfered with the welded bead on the body side, so I had to shave the bead and install it. I think it is an individual difference.
How was your experience with it?
I used it for the J-Trip endurance test, but it is difficult to maintain the rear caliper due to its position.
In particular, the Bolt on the front side of the Caliper will not allow the use of a normal length HEXSocket.
In the end, we decided on the Spool type.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZX-10R, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI NINJA2 Helmet50RR
Logo is Accent
I bought this to use Rear stand on my zrx1200ZrX1200 DAEG.
I decided on this one because the Logo is cute.
Since it is DURACON, I think it is good without damaging the STAND.
I can't help but feel a slippery slope when I use it.
View detail
Material:Plastic is GOOD
Material:In the case of Aluminum+Anodized products, the Anodized Treatment will inevitably peel off, so the Material:I was looking for something Plastic. The installation feels good. However, if the surface of the HookBracket on the STAND side is rough, it will scrape the Stand Hook, so be careful. View detail
Fits: Others , KTM 1190 RC8R, KTM 1190 RC8, HONDA CBR954RR, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR1000RR-R SP, HONDA VTR1000 SP1, HONDA VTR1000 SP2
Quality is assured
I purchased this for my CBR600RR (PC40).
I purchased this product because I needed it to use Maintenance Stand.
The price is high, but I am glad I chose Babyface sex.
The quality is safe to use.
View detail
Nice Accent, Large satisfied!
Axle Cup made by Baby-Face and Gold by Baby-Fsce are beautiful in color and make a good accent around the front, and I am satisfied with the large size.
If you have a STAND, you can simply loosen and pull out the Bolt, put the Axle Cup through the Bolt, and put it back in.
View detail
Swingarm Hook - Gold
About quality and texture The packaging is good and the texture of the product is good. About the feeling of use I just installed it and haven't tried the stand yet, so I don't know yet. Products to buy together I purchased the stand hook separately. Difficulty of installation It is simple, but it is a bit difficult to attach the rubber part. Cost performance and comparison with other products I think it is a reasonable price considering the function and the dress-up part. About shipping and packaging It took the expected time and the packaging was very good. Any concerns, cautions, or advice when purchasing Gold is very dark gold. Not the same as the Z900RS SE wheel color. View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZX-10R, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI NINJA2 Helmet50RR
It's Babyface.
Swing Arm and Stand Hook do not interfere with each other.
I'm satisfied
View detail
Bobbin position is low, so beware of that. Other than that, I'm satisfied.
This is a convenient part that allows the Bobbin (the round guy on the V-shaped receiving side) to be attached to the Swing Arm.
Babyface made, so the machining accuracy is high and there is no rattling or quantity.:Pair (for Left and Right) Cut-out Plate is also excellent in appearance.
The only thing to note with this part is that the Bobbin position is lower than usual (usually the Swing Arm itself has a Bobbin mounting hole), which increases the amount of lift up and requires more force when lifting up. It is not recommended to use a cheap short stand (although if two people are working together, this should not be a problem…).
I use j-trip's Exclusive V Received Set for ZrX to reduce the amount of lift up and to get a safety margin, since I basically do the lift up alone.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA MT-10
Active in maintenance and car wash
When lifting a rear tire on a motorcycle with only a Side Stand, a Maintenance Stand is used, but if a Hook is attached to the Rear Suspension Arm, when the Rear Suspension Arm rolls over, the root of the Rear Suspension Arm with the Hook on it will be damaged. I was also concerned that the Hook might crack, or that the Hook could not be removed because it had been scraped off.
When using this product, it is necessary to attach a Hook to the Maintenance Stand side, but even if it is not a ready-made product, it could be lifted by attaching the Hook that was originally attached to the rear suspension arm of the Motorcycle to the Maintenance Stand side.
It depends on the position of the Hook attached to the Maintenance Stand you use, but if you use a V-shaped Hook, you do not have to use as much force to lift the Motorcycle from the front, and the clearance between the Tire and the ground is not as high, so you can hang the Motorcycle on the Stand stably, which is a good thing. There was plenty of it.
When lifting the Motorcycle, the Side Stand is used to hold the Motorcycle at an angle to ensure that the Hook of the STAND is in the groove of the V-shaped Hook.:Pair (for Left and Right) Quantity by looking at the position of the:If you raise the Motorcycle to near vertical after setting and then raise the Maintenance Stand, the Motorcycle will not topple over.
View detail
I put it on my bmw s1000r 2018.
It was easy to install and looks great ^^. View detail