Reviews
Fits: KAWASAKI NINJA2 Helmet50RR, KAWASAKI BALIUS2, KAWASAKI ELIMINATOR 250V, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI NINJA400R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZZR1400 (ZX-14), KAWASAKI VERSYS, KAWASAKI VULCANS, KAWASAKI ZRX1100, KAWASAKI ZX-9R, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI Z1000
Convenient for maintenance
It's OEM Parts and convenient for maintenance. View detail
Fits: KAWASAKI NINJA2 Helmet50RR, KAWASAKI BALIUS2, KAWASAKI ELIMINATOR 250V, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI NINJA400R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZZR1400 (ZX-14), KAWASAKI VERSYS, KAWASAKI VULCANS, KAWASAKI ZRX1100, KAWASAKI ZX-9R, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI Z1000
It's just OEM Parts.
It is rigid.
It seems to me that many of the Kawasaki cars I see at Touring destinations also have a high installation rate,
I often see people dropping one side, so I apply Screw lock.
It has a rigid feel, but when you hold it in your hand, you can feel its weight because it is a lump of Gold.
For those who are working on weight reduction with Titaniumium Bolt and Aluminum parts, it is a good idea to use the following parts to reduce the weight of the vehicle.
There may be some resistance.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z800, KAWASAKI NINJA1000 (Z1000SX)
Stylish Stand Hook Bolt by Kawasaki
This is a Stand Hook Bolt from Aftermarket parts of Kawasaki overseas.
The installation instruction manual included in the kit is the English version, and the text is small and the printing is rough, so I could hardly read it. I took a picture of it with my cell phone and enlarged it to read it.
Although the instruction manual did not list the Z900RS as an applicable model, I was able to install it on the Swing Arm using the longest of the three included Spacers for the Left Side and the middle one for the Right Side, even though it was limited.
Maintenance Stand was used, and we could see that the resin part protects the Swing Arm to some extent.
I like the Simple design.
View detail
Kawasaki Stand Hook
It was supposed to be for a ZX-10R, but I was able to install it without any problems. View detail
Fits: KAWASAKI NINJA2 Helmet50RR, KAWASAKI BALIUS2, KAWASAKI ELIMINATOR 250V, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI NINJA400R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZZR1400 (ZX-14), KAWASAKI VERSYS, KAWASAKI VULCANS, KAWASAKI ZRX1100, KAWASAKI ZX-9R, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI Z1000
Convenient
I use it with Maintenance Stand and it is convenient because I can hang STAND stably.
Hook bolt is very easy to use and you don't have to worry about scratching the car body.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z800, KAWASAKI NINJA1000 (Z1000SX)
Both SidesExhaust System Caution
Purchased as OEMStand Hook for NINJA1000 (Both SidesExhaust System).
It is a US Kawasaki and the instruction manual is only available in English version, but it can be installed in less than 30 minutes.
I use a J−TRIP rear stand, but the Exhaust System and VHook fight with each other.
The gap between the Exhaust System and Stand Hook is small (Quantity to be exact).:Pair (for Left and Right) The VHook hits the Exhaust Guard (in my case it's the Left Side).
I thought about Cut of Exhaust Guard, but I use L-Type receiver for Rear stand.
I think the One SideExhaust System is Large strong?
Now I have it installed as a decoration because it looks good.
The price is high for the thing.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z800, KAWASAKI NINJA1000 (Z1000SX)
US KAWASAKIOEMParts
Original OEMParts from US kawasaki.
I don't know if it's because Kawasaki in Japan doesn't carry them or not, but the webike compatibility chart hasn't been updated at all.
If you can use M8 Stand Hook, it will fit, but you can check US kawasaki Site if you are interested.
As a product, Material:Bobbin and Material in Stainless Steel:Aluminum Protectordisc (with Logo) The combination of the two.
Protectordisc is somewhat matted and has a sense of unity with the Swing Arm.
On the downside, it's expensive.
If you want to buy only Bobbin, you can buy it for half the price of this Parts. If you don't care about it, you can buy it there.
View detail
Fits: KAWASAKI NINJA2 Helmet50RR, KAWASAKI BALIUS2, KAWASAKI ELIMINATOR 250V, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI NINJA400R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZZR1400 (ZX-14), KAWASAKI VERSYS, KAWASAKI VULCANS, KAWASAKI ZRX1100, KAWASAKI ZX-9R, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI Z1000
Practicality.
The Green Light Hook bolt that I normally use for the Maintenance Stand is the only one that I use for the Custom. I use this product's Hook bolt when I actually hang the Maintenance Stand. It is very convenient to use without worrying about scratches. View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z800, KAWASAKI NINJA1000 (Z1000SX)
After running the car, we found out why it was not included in the compatible models.
The Swing Arm has the Stand Hook mounting holes, but for some reason the Ninja 650 is not included in the Kawasaki OEM Stand Hook.
I bought the other sizes for vehicles that fit the mounting holes of the Swing Arm and tried to install them.
When the maintenance stand was used afterwards, there was not even a thing that was scratched on the body of the car.......but when I ran around the neighborhood a little after maintenance and touched the part to check the looseness of the Mounting Bolt, the exhaust hit or it was quite hot!
There was a good reason why it wasn't in the compliant models.
The resin part might melt if you run for a long time in Touring, etc., so I remove it except when using STAND. 。
View detail
Fits: KAWASAKI Kawasaki Others, KAWASAKI Kawasaki Others
The Manufacturer logo is working at one point.
I replaced it with an Aluminum Swing Arm, and since the Stand Hook was attachable, I chose this product after much hesitation.
The reason for the choice was that I thought the Motorcycle Manufacturer name looked better than the one with a brand name or something that has little to do with the vehicle.
I like the fact that the diameter of the brim of the Hook is larger on the inside of the car body, which seems to be more effective in preventing damage to the Swing Arm.
View detail