Reviews
RIDEA stand hook
I want to know what I want to know.
I can't wait to see it, I can't wait, I can't wait to see it.
Webike bike bike bike.
I purchased this part because it made chain cleaning and bike maintenance easier.
The quality and weight of the product, as well as the perfect color, are very good.
We would like to thank Webike for packaging the item safely and neatly even though it was shipped far away. -------------------------------------------------- -------- This part was purchased for the convenience of chain cleaning and bike maintenance. The quality of the product, its weight, and the perfect color are all very good. We would like to thank Webike for packaging the item safely and neatly even when it was shipped over a long distance. I bought this part because it made it easier to clean the chain and maintain the bike. It's important to know how to prepare and feel the importance of weight. It's easy to move around and separate the parts. Powered by Google Translator
View detail
Fits: HONDA , SUZUKI , DUCATI , KAWASAKI NINJA ZX-10R, KAWASAKI NINJA ZX-6R, KAWASAKI NINJA1000, KAWASAKI Z1000, KAWASAKI Z800, TRIUMPH DAYTONA675, BMW S1000RR, BMW S1000RR
Good quality
Accuracy quality is good.
I should have checked the outside diameter dimensions of where the Hook hangs before purchasing.
It would be appreciated if you could indicate the size in the Catalogue Spec.
The diameter of the Attachment of the Rear stand is Small, Quantity:Set was not possible.
View detail
It wasn't necessary.
Purchased to raise the rear wheel when cleaning the chain, etc., as there is only a side stand.
I attached it, but I only needed the L-Type Adapter that came with the Rear stand.
Well, it looks good, and I'll leave it on.
View detail
Too much sticking out, unreliable and uncool.
I am sure we are mistaken, but the distance from the outside of the bottom edge of the rear suspension to the mounting collar of the rear stand is wide, and although I cannot explain it well in words, the diameter is thin and unreliable. View detail
Fits: KAWASAKI NINJA ZX-10R, KAWASAKI NINJA ZX-6R, KAWASAKI NINJA1000, KAWASAKI Z1000, HONDA , SUZUKI , DUCATI , KAWASAKI Z800, BMW S1000RR, TRIUMPH DAYTONA675
Quality is satisfactory
The quality is satisfactory, but it is a little thicker than the STAND of DAYTONA and did not go all the way to the back of the Hook. View detail
improve labor efficiency (labour)
Maintenance is easier.
Some Screws need to be stopped with Screw locketc.
View detail
Screw lock is required for installation.
If the Hook is simply installed and run like a normal Stand Hook, the outer part of the Hook will come off and be lost.
I lost one of mine on the first run.
It seems that only a temporary assembly was done at the time of shipment, and it was only when it was missing that I realized it was a split type.
It was found that the structure is not stacked and assembled with the Bolt in the Center.
The body is divided into three sections (outer, hook, and inner) and is not held in place by the bolt, so the body is not held in place by the bolt.
After attaching screw locks to each part, the body is assembled, and then the body is attached to the motorcycle.
Since the MONKEY125 has a large vibration, there is a large possibility that it will come off without screw lock.
The quality of the product itself is very good, and the fact that the Stand Hook is easy to use is a 5, but
The Shock of having lost in disassembling is Large, and already Quantity.:I bought 1 Set (crying)
View detail
Fits: KAWASAKI NINJA ZX-10R, KAWASAKI NINJA ZX-6R, KAWASAKI NINJA1000, KAWASAKI Z1000, HONDA , SUZUKI , DUCATI , KAWASAKI Z800, BMW S1000RR, TRIUMPH DAYTONA675
Good-looking and practical
When using the maintenance stand to lift up, I used the V-brake on my previous motorcycle, but with the ninja 1000, the Normal muffler would interfere with the V-brake, so I used the L-brake.
This time, I bought Stand Hook because I could finally use the V receiver after replacing the Exhaust System.
There is no instruction manual, you just put it on with a hexagon, but it is easy to loosen by vibration, so I used screw lock agent. 5 minutes is all it takes.
I selected it because of the Red color in the insert, but it is very well made.
It is also effective for Dress-up.
View detail
Necessary and sufficient
The quality is more than enough for the price.
The good point of this product is not only the quality but also the fact that the suspension mounting part is made of SUS to keep enough strength and the outside color is Anodized Finishing Aluminum.
The mounting nut of the rear suspension is a point where I want strength and reliability, so it was the right choice for that one point alone.
View detail
Fits: KAWASAKI NINJA ZX-10R, KAWASAKI NINJA ZX-6R, KAWASAKI NINJA1000, KAWASAKI Z1000, HONDA , SUZUKI , DUCATI , KAWASAKI Z800, BMW S1000RR, TRIUMPH DAYTONA675
No problem
It can be used for maintenance and dress-up.
It has a nice color.
View detail
It looks cool.
It was well made and left on.
I tightened it by hand, but I was worried about Torque, so I tightened it with Torque wrench, but I tightened it too much and Screw was damaged.
Be careful when tightening as it is shaped like a Nut.
View detail
It is easy to install.！
Just remove the Bolt at the base of the Suspension, replace it with the product in question, and tighten it with the Hexagonal Wrench, so you can complete the installation in 10 minutes.
I installed it because I plan to use the maintenance stand when I do chain maintenance, and I like it because it matches the body color better than I expected.
View detail
Up in looks and workability!
Installation is easy, just replace the Nut with the Rear Suspension Nut, so anyone can do it. 。 Not only will it look better, but it will also make it easier to use the maintenance stand and improve the workability. The price is also Reasonable and the cost is also good. I recommend it! View detail
That's good, about half the price of other companies' products
If you search on the Net, it's about half the price of other companies' products
You may have different tastes in shape, but the texture is quite good
I think the cost is better than buying more STAND
The higher the position, the less lift is required
I was wondering if I should buy a STAND for my mini bike, but I didn't need one It's very easy to install, so it's not necessary to buy a stand for my bike But I'm leaving it on because it has a good reputation around it
View detail
Satisfied (Lol)
For this price, you can't complain about this accuracy, build and quality!
At first I had to look around quite a bit to find this product But I'm glad I didn't buy expensive products from other companies (Lol)
Cost performance by quality/price is very high!
View detail
Almost satisfied
Although Stand Hook comes out from various Manufacturers, the thing which is easy to get at the shop was scraped from the solid wood of Large Resistance Aluminum and it went on to Color Anodized Aluminum, so I was looking for somewhat elaborate design.
As a precaution, the Reverse side is hard to understand if it is a picture, but there is a cylindrical projection on the bottom side of the HookBody.
The body with the Hook attachment part on the lower side of the Swingarm is designed to adjust the step difference with Swingarm in that part, but in the case of the body with the Screw hole directly in Swingarm it will be quite unnatural shape.
Because I was here, I disconnected it with HandyGrinder and used it.
View detail