Reviews
Fits: SUZUKI , TRIUMPH DAYTONA675, KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ninja, KAWASAKI ZX10R, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI Z250, KAWASAKI Z1000, HONDA , KAWASAKI Ninja 1000SX, DUCATI Late 999, BMW S1000RR, DUCATI 749, BMW S1000R
Replaced from Chinese
I bought it after seeing other people using it at Motegi. Unlike the Chinese Hook, the J-TRIP Hook has a step to prevent the swing arm from hitting the swing arm. What I didn't understand was that the Hook has a double structure with a collar inside, but since the Hook doesn't rotate, I am wondering what the collar is for. I also think the price is a bit high. Well, I am satisfied with it. View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
I know it's not the same application, but this one helped me!
The other day, when I was in a fender bender with a car and fell, this Hook bolt was deformed but the Swing Arm was unharmed.
I guess the original purpose of this product is to be used as a Hook when raising the product in STAND, but it was helpful to play the role of a Slider.
However, as may have been mentioned in the product description, the clearance may not be sufficient and the STAND may interfere with the Swing Arm if it is used as a Stand Hook as it should be.
I don't want to bother you again, but I am still wearing the same one after the accident.
View detail
Fits: Others , KTM 1190 RC8R, KTM 1190 RC8, HONDA CBR954RR, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR1000RR-R SP, HONDA VTR1000 SP1, HONDA VTR1000 SP2
Casual Dress-up
For Front Axle Slider and Engine slider
I have Babyface on and a Stand Hook.
The same Manufacturer is used for this product.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S150, SUZUKI GSX-R150, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI KATANA, SUZUKI GSX-R1000, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI SV650, SUZUKI V-Strom250, SUZUKI SV650X ABS, SUZUKI SV650 ABS, SUZUKI SV650X, KAWASAKI ZX-10R, DUCATI 999, DUCATI 999S, SUZUKI GSX-8S, SUZUKI GSX-S1000GT
Fashion
STAND will be easier, but it is more dress-up oriented. View detail
Fits: KAWASAKI BALIUSI, KAWASAKI ZEPHYR400 χ, KAWASAKI ZX-7RR, KAWASAKI ZX-7R, KAWASAKI , KAWASAKI XANTHUS, KAWASAKI ZXR400, KAWASAKI ZXR750, KAWASAKI ZXR250, KAWASAKI ZRX400
For future maintenance
Purchased in anticipation of future maintenance using the Maintenance Stand.
Installation is as simple as tightening the bolt.
View detail
Compatible model
It also arrives at cb750 rc42. View detail
Refreshing appearance
I originally used Hook bolt, but bought CrabHook because I thought it looked more Refreshing.
I installed it immediately and it is working fine.
It looks Refreshing and I like it very much.
View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom1000, SUZUKI V-Strom250, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSX-R125, SUZUKI GSX-R125 ABS, SUZUKI GSX-S125
To dress-up your feet.
Blue, the same color as the car body, was selected for the One Point underfoot.
It's a little bright Blue.
It can also be a Stand Hook, which is its original purpose, but for me, since my purpose is to Dress-up, I don't think I would use STAND.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S150, SUZUKI GSX-R150, SUZUKI GSX-S1000F, SUZUKI GSX1300R HAYABUSA, SUZUKI V-Strom250, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI SV650X ABS, SUZUKI SV650 ABS, SUZUKI SV650X, SUZUKI GSX-8S, KAWASAKI ZX-10R, DUCATI 999, DUCATI 999S, SUZUKI GSX-R1000, SUZUKI KATANA, SUZUKI GSX-R1000R, SUZUKI SV650, SUZUKI GSX-S1000GT
A bit pricey?
I put it on every time I change Motorcycle.
The black plastic part that receives the Hook of the Maintenance Stand inside rotates, so the Body is hardly scratched.
If it were cheaper, I would give it 5 stars.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Moriwaki branding would be a nice touch
Nicely machined & fit for purpose. They screw in easily to the mounting points on the stock swingarm. Such a shame that moriwaki neglected to place their logo somewhere on this product, it would have been a nice touch. View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z800, KAWASAKI NINJA1000 (Z1000SX)
Stylish Stand Hook Bolt by Kawasaki
This is a Stand Hook Bolt from Aftermarket parts of Kawasaki overseas.
The installation instruction manual included in the kit is the English version, and the text is small and the printing is rough, so I could hardly read it. I took a picture of it with my cell phone and enlarged it to read it.
Although the instruction manual did not list the Z900RS as an applicable model, I was able to install it on the Swing Arm using the longest of the three included Spacers for the Left Side and the middle one for the Right Side, even though it was limited.
Maintenance Stand was used, and we could see that the resin part protects the Swing Arm to some extent.
I like the Simple design.
View detail
Fits: HONDA , SUZUKI , DUCATI , KAWASAKI NINJA ZX-10R, KAWASAKI NINJA ZX-6R, KAWASAKI NINJA1000, KAWASAKI Z1000, KAWASAKI Z800, TRIUMPH DAYTONA675, BMW S1000RR, BMW S1000RR
Good quality
Accuracy quality is good.
I should have checked the outside diameter dimensions of where the Hook hangs before purchasing.
It would be appreciated if you could indicate the size in the Catalogue Spec.
The diameter of the Attachment of the Rear stand is Small, Quantity:Set was not possible.
View detail
It is a good product
I purchased this product because I was concerned about working with the Shoulder Type since the Motorcycle Axle is not hollow. There is no problem in installation. I don't think it will come off with the Y-type Hook. The quality is quite good, but the price is high. If it were a little cheaper, it would be easier for people in need to get their hands on it. View detail
Fits: SUZUKI DL1000 V-STROM650, BMW S1000RR, BMW S1000RR, KAWASAKI Z1000, KAWASAKI ZX-10R, KAWASAKI ZX-25R, KAWASAKI ZX-6R, SUZUKI GSR750, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-S1000F, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX250R, SUZUKI SV650, SUZUKI KATANA, SUZUKI GSX-S1000, KAWASAKI NINJA250
Easy and clean!
It's easy, beautiful, and a dress-up! View detail
For STAND use
[How is it used?
Purchased for use with rear stand
Was the one you received as per Image?
Yes
Was the installation difficult?
Very easy. Installed with Screw lock agent.
How was your experience with it?
good
[Included Parts:were they on?
None in particular (Body and mounting Screw only)
[Was there anything that disappointed you?
nothing in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It is a small part, but the texture is good and it is not too conspicuous.
I think it would be better if the diameter of the body side is a little larger to reduce the possibility of the attachment of the STAND touching the swing arm.
Also, it would be better if there were several color options.
View detail
Used for JC92Front
I installed this on a Grom JC92Front. The Right Side Axle Nut of the JC92 is a UNut, so it is very tight. I couldn't turn it with a normal ratchet handlebar, so I extended the Spinner Handlebar + handle with a Pipe.
The Right SideAxle Nut has a 19mm socket, but I was a little worried.
View detail
Fits: BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX250R, SUZUKI GSX1300GSX1300R HAYABUSA, BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Purchased with Maintenance Stand
I purchased the V-receiver for the Maintenance Stand and bought it together.
Since the bar end was Posh's, I chose the same Manufacturer.
I thought the color was the same, but is it slightly different? Is it the light or my imagination? It may be hard to tell from the photo, but I'll put it up just in case.
View detail
I like it because it looks like Mr. Battle.
Short Type.
I am a wait-and-see motorcyclist, and I chose the short length in order to limit damage in the event of a fall.
I like Battle's products because they are generally suitable value with Stages.
Note that it is more difficult to use than Long Type for private use.
View detail
Dress-up
Using Lift jack is now much easier.
The installation was a bit tricky, as the angle of the fixing spacer needed to be adjusted when tightening the bolt.
View detail
Racing Stand Hook
Reason for purchase
Since GOOSE does not have a center stand, I bought a very inexpensive racing stand and worked without a hook, using the rear swing arm to support the stand. It is not impossible, but it is easy to gap and may damage the Swing Arm.
For work efficiency, we decided that it would be better to add a Stand Hook and purchased it.
Although there are a variety of Material:I chose Plastic because I thought I would not have to worry about scuff marks. I also thought the price was reasonable.
【attachment】
The original Screw hole Cap was removed and the Screw hole was grimly and thoroughly cleaned to make sure the supplied Bolt would fit Smoothly before installation.
【Impressions】
I have not used other Stand Hooks of this type, so I can't compare, but I think it is something like this. I think it is not bad.
View detail