Reviews
Fits: APRILIA RS125, DUCATI MONSTER S2821, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA RS250, YAMAHA , TRIUMPH DAYTONA675, APRILIA SL750
I went with Gold...
I bought it to go with the rear stand, but I think it would be fine with other Manufactures.
The color jumps with age when exposed to the sun, I think the same for the others.
If so, I'm glad it was inexpensive.
View detail
Fits: SUZUKI , TRIUMPH DAYTONA675, KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ninja, KAWASAKI ZX10R, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI Z250, KAWASAKI Z1000, HONDA , KAWASAKI Ninja 1000SX, DUCATI Late 999, BMW S1000RR, DUCATI 749, BMW S1000R
Well, I managed.
I purchased STAND because it is easier to clean the chambers by standing them up. STAND is especially good for cleaning the Chain.
The stand hook no longer interferes with the OEM muffler on the 1000SX, but the gap between the stand bracket and the swing arm is narrower because the stand hook is shorter. The stand and stand bracket are J-TRIP's short roller stands and V-suke 1.
As a countermeasure, we fixed the protective cover of the receiving bracket with tape so that it would not come off even if it rubbed against the swing arm, and inserted two washers (made by KITACO) with an outside diameter of 14mm, an inside diameter of 8mm and a thickness of 1mm into the hook bolt to widen the gap between the receiving bracket and the swing arm. I decided to insert two washers (made by KITACO) of 14mm OD, 8mm ID, and 1mm thickness into the hook bolt to widen the gap between the bracket and the swing arm.
I think the receiving bracket is made of steel, but the hook bolt is made of aluminum. The Kawasaki OEM hook bolt I used on my old motorcycle was stainless steel, and I prefer stainless steel as a tool. It feels worn, but it is not noticeable and does not scrape.
Incidentally, I have PLOT's LowdownKIT installed, but the gap between the tire and the stand is narrow, and depending on the brand of tire, it may interfere with the stand. In that case, you can raise the stand one step, but the gap between the fender and the stand will be narrower, so it will be a little harder to step on the fender with your foot, and the higher the stand, the heavier the stand clamp will be.
View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
good
Since it is the same Manufacturer as STAND.
Because it is not as flashy as other Manufacturers.
View detail
In any case, it should be from a reliable Manufacturer.
To be honest, I could have chosen any stand hook, since all stand hooks are equal in performance, but I wanted to choose one made by a well-known and reliable manufacturer, so I decided to go with MORIWAKI. View detail
Fits: YAMAHA MT03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03
Stand Hook for easy lift up
Purchased for use with Racing Stand.
Compared to the Spool type, the Spool type does not protrude laterally and has a smaller Damage at the time of tipping.
The installation seems to be a hassle since the Type requires fine adjustment. The structure is such that it is likely to shift its position while being used.
It can be used without any problem in terms of feel. The texture is not bad.
View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom1000, SUZUKI V-Strom250, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSX-R125, SUZUKI GSX-R125 ABS, SUZUKI GSX-S125
M10.
M10, but if you have a small one, buy it because YOSHIMURA is in the middle of unification, It is easy to install. View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, KAWASAKI ZX-10RR, KAWASAKI ZX-6R, KAWASAKI ZX636
It also prevents damage in the event of a fall.
I changed to Racing Stand Hook in consideration of tipping over because of circuit driving.
You can use JTrip's STAND.
The color selected was Green Light because it is Kawasaki.
Color Matching is good.
View detail
Spacer is required!
I installed Spool on Z900RS, but there are many parts that overlap with Swing Arm, so I think it is better to install Spacer and Spool.
The texture was 0.
View detail
Fits: KAWASAKI Z750S (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI Z750R, KAWASAKI Z750R, KAWASAKI Z750R, KAWASAKI Z250SL, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R
Work
I installed it on a 2021 RC390, but the bolt that came with it did not have the correct pitch, so I used a bolt sold at a local home center.
We purchased this item because we just had the Orange color in stock.
After using it for a while, the color faded due to ultraviolet rays? After using it for a while, the color faded due to UV rays.
I didn't have any problems using it on Jack-up, but if you are concerned about how it looks or when it is left mounted on the car body, you may need to take some measures to prevent it from looking bad.
View detail
It wasn't necessary.
Purchased to raise the rear wheel when cleaning the chain, etc., as there is only a side stand.
I attached it, but I only needed the L-Type Adapter that came with the Rear stand.
Well, it looks good, and I'll leave it on.
View detail
Fits: APRILIA RSV4 RF, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono, APRILIA Tuono, APRILIA Tuono, APRILIA Tuono, APRILIA Tuono, APRILIA TUONO V4 1100 Factory, APRILIA TUONO V4 1100 Factory, APRILIA TUONO V4 1100 Factory, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR
Is M6 still thin?
Installation 3 min.
If only this would make Maintenance easier!
This is the second time I've bought one of these, or maybe the last time, and one of them got bent.
I put it back and it broke.
Is M6 still too thin?
View detail
PetitCustom
I considered AELLA products, but I didn't like the protruding ones, so I decided to go with this one. The operation was good without damaging the boots. View detail
It's good looking, but …
Anodized treated, colors are great, design is cool! …However
Is it not suitable for a racing stand…? Compared to other Hooks
It is hard to STAND. I am also worried because I don't think it is very hard.
Recommendation for those who prioritize looking good!
View detail
Bolt size was wrong, but the quality was high.
I tried to use it on my Panigale, but gave up installing it because it was an M6 instead of an M8.
However, we switched to M6Spec. because of its higher quality compared to the price.
The product was designed with no problems in installation and the texture of Aluminum, and was recommended.
View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
Anodized or DURACON?
I bought DURACON because using Anodized Hooks inevitably results in Anodized peeling and scratching after use.
I purchased the black color and the scratches from use are not noticeable, but the black color is turning white due to sunburn.
In this respect, the White color may not be noticeable.
It is simple, so it does not have the same dress-up effect as the Anodized version, but I like the simplicity of the smallest necessary limit.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI NINJA ZX-14R, KAWASAKI ZX-12R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1100 II, KAWASAKI ZX-10R, KAWASAKI NINJA1000, KAWASAKI Z1000, KAWASAKI ZX-6R, KAWASAKI NINJA250, KAWASAKI NINJA250R, KAWASAKI Z250, KTM RC250 (KTM)
It looks good Gold color
Is a spacer used, is the bolt longer or shorter? There was no Instruction Manual, so it was difficult for a beginner to understand. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S150, SUZUKI GSX-R150, SUZUKI GSR750, KAWASAKI ZX-10R, SUZUKI SV650 ABS, SUZUKI SV650X, SUZUKI SV650, SUZUKI KATANA, SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX1300R HAYABUSA, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, DUCATI 999, DUCATI 999S, SUZUKI GSX-8S, SUZUKI GIXXER SF250
high
The product is not bad, but the price is too high. View detail
Fits: BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, SUZUKI GSX250R, BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX1300GSX1300R HAYABUSA, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
usually
There is no problem in STANDing.
It has quite a presence, so it could be a dress-up piece.
View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom1000, SUZUKI V-Strom250, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSX-R125, SUZUKI GSX-R125 ABS, SUZUKI GSX-S125
It has attached to ZX-10R.
It has attached to ZX-10R. View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom1000, SUZUKI V-Strom250, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125, SUZUKI GSX-S750
In zx10r.
I wanted Stand Hook and bought it.
It works fine
I thought it would be short, but it doesn't stick out, just right.
Recommendation.
View detail