Reviews
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
SNIPER SnaRacing Stand Hook with Sprocket guard Type C
I installed it as a decoration! I don't know about the functionality of the Racing Stand since I haven't used it. View detail
Fits: KAWASAKI NINJA2 Helmet50RR, KAWASAKI BALIUS2, KAWASAKI ELIMINATOR 250V, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI NINJA400R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZZR1400 (ZX-14), KAWASAKI VERSYS, KAWASAKI VULCANS, KAWASAKI ZRX1100, KAWASAKI ZX-9R, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI Z1000
It's just OEM Parts.
It is rigid.
It seems to me that many of the Kawasaki cars I see at Touring destinations also have a high installation rate,
I often see people dropping one side, so I apply Screw lock.
It has a rigid feel, but when you hold it in your hand, you can feel its weight because it is a lump of Gold.
For those who are working on weight reduction with Titaniumium Bolt and Aluminum parts, it is a good idea to use the following parts to reduce the weight of the vehicle.
There may be some resistance.
View detail
To change from L-Type to U-Type receptacle
Purchased to change from L-Type to U type nut. The installation work itself is simple, but the nut holes are gapped because of the load applied when the pure STD nut is removed.
When installing this product, Jack or lifting force to lift the vehicle body is required. After installation, maintenance stand work is safer.
The gap between the ground and Tire is about 55mm with AstroPROducts MiddleRear stand.
View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom1000, SUZUKI V-Strom250, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSX-R125, SUZUKI GSX-R125 ABS, SUZUKI GSX-S125
To dress-up your feet.
Blue, the same color as the car body, was selected for the One Point underfoot.
It's a little bright Blue.
It can also be a Stand Hook, which is its original purpose, but for me, since my purpose is to Dress-up, I don't think I would use STAND.
View detail
Swing Arm Protection
It doubles as a Stand Hook and Slider.
A light fall will provide protection.
Large falls make the bosses flinch.
That's right
Because it is easy to use.
I would like to modify the mounting Bolt.
Installation is a cinch, as only Screws are required.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S150, SUZUKI GSX-R150, SUZUKI GSX-S1000F, SUZUKI GSX1300R HAYABUSA, SUZUKI V-Strom250, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI SV650X ABS, SUZUKI SV650 ABS, SUZUKI SV650X, SUZUKI GSX-8S, KAWASAKI ZX-10R, DUCATI 999, DUCATI 999S, SUZUKI GSX-R1000, SUZUKI KATANA, SUZUKI GSX-R1000R, SUZUKI SV650, SUZUKI GSX-S1000GT
A bit pricey?
I put it on every time I change Motorcycle.
The black plastic part that receives the Hook of the Maintenance Stand inside rotates, so the Body is hardly scratched.
If it were cheaper, I would give it 5 stars.
View detail
Fits: YAMAHA R1M, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA MT-10, YAMAHA MT-10 SP, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09 TRACER, YAMAHA YZF-R6
It was expensive to prevent Rust.
I have attached a Stand Hook even though I do not have a Maintenance Stand. The purpose is to prevent bolt hole rust.
I ordered at Tension at night even though I'm not particular about K-FACTORY, and when I reconsidered, it had already shipped and I was done with it.
If you want to prevent Rust, you can use a cheap one.
As mentioned above, I don't have a maintenance stand, so I don't know how I feel about it, and I don't have any feelings for K-FACTORY as dress-up parts.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Moriwaki branding would be a nice touch
Nicely machined & fit for purpose. They screw in easily to the mounting points on the stock swingarm. Such a shame that moriwaki neglected to place their logo somewhere on this product, it would have been a nice touch. View detail
In any case, it should be from a reliable Manufacturer.
To be honest, I could have chosen any stand hook, since all stand hooks are equal in performance, but I wanted to choose one made by a well-known and reliable manufacturer, so I decided to go with MORIWAKI. View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom250, SUZUKI V-Strom1000, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125, SUZUKI GSX-S750
YOSHIMURA! For now, SEA BASS is YOSHIMURA!
[How is it used?
At any rate, I wanted to include one YOSHIMURA since it is a SEA BASS car!
Was the one you received as per Image?
I knew there was another higher Class, so I guess this is what I got!
How was your experience with it?
To tell the truth, I have not been able to use it because I do not have a STAND, which is the most important part of this product!
Asunaro Asunaro, and I hope to be able to grab it when I buy it someday.
[Points to note]
Please buy this and throw it in before the inside of the Screw hole rusts.
How did it compare to other products?
No, so the fact that it says YOSHIMURA is Status (laughs).
▼ Other items like this can be helpful (Items that should be purchased together)
Since the Bracket is designed to be used with the Maintenance Stand, it would be a waste without the Rear Stand! (^。^) y-. O-
View detail
Fits: YAMAHA MT03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03
Stand Hook for easy lift up
Purchased for use with Racing Stand.
Compared to the Spool type, the Spool type does not protrude laterally and has a smaller Damage at the time of tipping.
The installation seems to be a hassle since the Type requires fine adjustment. The structure is such that it is likely to shift its position while being used.
It can be used without any problem in terms of feel. The texture is not bad.
View detail
Good looks, good functionality
It can be easily installed using the Bolt hole from which the OEM Rear Fender was removed. It looks good, functions well, and you can hang the Rear stand without any problem. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S150, SUZUKI GSX-R150, SUZUKI GSX-S1000F, SUZUKI GSX1300R HAYABUSA, SUZUKI V-Strom250, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI SV650X ABS, SUZUKI SV650 ABS, SUZUKI SV650X, SUZUKI GSX-8S, KAWASAKI ZX-10R, DUCATI 999, DUCATI 999S, SUZUKI GSX-R1000, SUZUKI KATANA, SUZUKI GSX-R1000R, SUZUKI SV650, SUZUKI GSX-S1000GT
I buy Motorcycle every time I buy a new one.
I buy it to match my car body color.
The aluminum body is fixed with Bolt, and the inner DURACON rotates freely with the aluminum body as the axis of rotation, allowing the maintenance stand to be applied smoothly.
MaintenanceSTAND is applied to DURACON so that the AluminumBody is hardly scratched.
The only slight disappointment is that the anodized will fade over time.
Other than that, I am satisfied.
View detail
j-trip Swing arm hookBolt
High quality and easy to use.
Note that Long is for z900 only.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z800, KAWASAKI NINJA1000 (Z1000SX)
Stylish Stand Hook Bolt by Kawasaki
This is a Stand Hook Bolt from Aftermarket parts of Kawasaki overseas.
The installation instruction manual included in the kit is the English version, and the text is small and the printing is rough, so I could hardly read it. I took a picture of it with my cell phone and enlarged it to read it.
Although the instruction manual did not list the Z900RS as an applicable model, I was able to install it on the Swing Arm using the longest of the three included Spacers for the Left Side and the middle one for the Right Side, even though it was limited.
Maintenance Stand was used, and we could see that the resin part protects the Swing Arm to some extent.
I like the Simple design.
View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom1000, SUZUKI V-Strom250, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSX-R125, SUZUKI GSX-R125 ABS, SUZUKI GSX-S125
M10.
M10, but if you have a small one, buy it because YOSHIMURA is in the middle of unification, It is easy to install. View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, KAWASAKI ZX-10RR, KAWASAKI ZX-6R, KAWASAKI ZX636
It also prevents damage in the event of a fall.
I changed to Racing Stand Hook in consideration of tipping over because of circuit driving.
You can use JTrip's STAND.
The color selected was Green Light because it is Kawasaki.
Color Matching is good.
View detail
Fits: Others , KTM 1190 RC8R, KTM 1190 RC8, HONDA CBR954RR, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR1000RR-R SP, HONDA VTR1000 SP1, HONDA VTR1000 SP2
Logo is Cool
Material:The Aluminum ones look worn out after use,
I looked for it among DURACON's things.
After all, the Logo is Cool.
View detail
Fits: HONDA , SUZUKI , DUCATI , KAWASAKI NINJA ZX-10R, KAWASAKI NINJA ZX-6R, KAWASAKI NINJA1000, KAWASAKI Z1000, KAWASAKI Z800, TRIUMPH DAYTONA675, BMW S1000RR, BMW S1000RR
Good quality
Accuracy quality is good.
I should have checked the outside diameter dimensions of where the Hook hangs before purchasing.
It would be appreciated if you could indicate the size in the Catalogue Spec.
The diameter of the Attachment of the Rear stand is Small, Quantity:Set was not possible.
View detail
It is a good product
I purchased this product because I was concerned about working with the Shoulder Type since the Motorcycle Axle is not hollow. There is no problem in installation. I don't think it will come off with the Y-type Hook. The quality is quite good, but the price is high. If it were a little cheaper, it would be easier for people in need to get their hands on it. View detail