Reviews
Genuine R&G Cotton Reels for Kawasaki Z900
These were purchased to add a little protection and also to utilise a paddock stand for maintenance on the Kawasaki Z900 model. The part was pretty easy to find with using the R&G website. Webike price was really good and with a few other parts in my order, all was shipped and delivered by EMS in 5 days. All was packaged really well and no damage. These are super nice spools for the bike, they are fairly chunky but this means you will not have an issue with slippage like you get with some of the small spools. I have had previous experience with these in the even tof a crash, they relly do protect the spindle to the rear wheel. They are made from a plastic mix but I am unsure of exactly what. The spools themselves look great when fited and the R&G logo printed on the sides is a nice touch. Really clean and machined good. You even get a set of new bolts that are stainless steel I believe. Very pleased with the purchase. Thanks Webike. View detail
Fits: KAWASAKI Z750S (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI Z750R, KAWASAKI Z750R, KAWASAKI Z750R, KAWASAKI Z250SL, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R
Work
I installed it on a 2021 RC390, but the bolt that came with it did not have the correct pitch, so I used a bolt sold at a local home center.
We purchased this item because we just had the Orange color in stock.
After using it for a while, the color faded due to ultraviolet rays? After using it for a while, the color faded due to UV rays.
I didn't have any problems using it on Jack-up, but if you are concerned about how it looks or when it is left mounted on the car body, you may need to take some measures to prevent it from looking bad.
View detail
Fits: APRILIA RSV4 RF, APRILIA RSV4 RF, APRILIA RSV4 RF, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA TUONO V4 1100 Factory, APRILIA TUONO V4 1100 Factory, APRILIA TUONO V4 1100 Factory, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4
Genuine R&G Swingarm Cotton Reels for RSV4 2016
These were purchased to add a little protection and also to utilise a paddock stand for maintenance on the Aprilia RSV4 2017 model. The part was pretty easy to find with using the R&G website. Webike price was really good and with a few other parts in my order, all was shipped and delivered by EMS in 5 days. All was packaged really well and no damage. These are super nice spools for the bike, they are fairly chunky but this means you will not have an issue with slippage like you get with some of the small spools. I have had previous experience with these in the even tof a crash, they relly do protect the spindle to the rear wheel. They are made from a plastic mix but I am unsure of exactly what. The spools themselves look great when fited and the R&G logo printed on the sides is a nice touch. Really clean and machined good. You even get a set of new bolts that are stainless steel I believe. Very pleased withe the purchase. Thanks Webike. View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR
Genuine R&G Cotton Reels for 09 Fireblade
There were a couple of other parts that I wanted to get for project track bike which will help protect the bike if there is any accident. These are what I decided to get and the added bonus is that not only will they protect the swingarm but you use them to lift the rear wheel with a paddock stand. Dual purpose which is brilliant.I found the correct part numbers by checking R&G website and adding the model of bike. Very pelased to see that Webike also stock them, so purchased them from here instead.The price is roughly what I could get them for locally but I can count of Webike delivering my items on time and without a hitch. The outer box was sealed and the littel bit of empty space inside the box was filled with buble wrap. All my parts, even the samller ones arrived in perfect condition. The cotton reels came in their own box which was nice and touch so there would be no damage. They have a really smoothed out thread on the bolts which went in smoothly, not notchy or sharp edged. They attach to the mounting points on the swingarm with no issue. The cotton reels themselves are made from a special nylon I believe, don't quote me on that though but they are very similar to the others I have purchased. I tried them with my standard paddock stand and they are a perfect fit, no wobble like some other cotton reels so a very good product all around. Very pleased with the result. Thank you Webike for your hard work. View detail
Fits: YAMAHA FZ1, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-10, YAMAHA MT-09, DUCATI Monster 821, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA XSR900, YAMAHA YZF-R1, APRILIA Shiver 750
Genuine R&G Cotton Reels for MT09
There were a couple of other parts that I wanted to get for my wife's MT09 which will help protect the bike if there is any accident. These are what I decided to get and the added bonus os that not only will they protect the swingarm but you use them to lift the rear wheel with a paddock stand. Dual purpose which is brilliant. I found the correct part numbers by checking R&G website and adding the model of bike. Very pelased to see that Webike also stock them, so purchased them from here instead. The price is roughly what I could get them for locally but I can count of Webike delivering my items on time and without a hitch. The shipping method I chose this time was EMS fast service. It was a very good price as I also had a few other parts in my basket and this cut the shipping down than just buying one or two parts. Everything arrived with me in 5 days. The outer box was sealed and the littel bit of empty space inside the box was filled with buble wrap. All my parts, even the samller ones arrived in perfect condition. The cotton reels came in their own box which was nice and touch so there would be no damage. They have a really smoothed out thread on the bolts which went in smoothly, not notchy or sharp edged. They attach to the mounting points on the swingarm with no issue. The cotton reels themselves are made from a special nylon I believe, don't quote me on that though but they are very similar to the others I have purchased. I tried them with my standard paddock stand and they are a perfect fit, no wobble like some other cotton reels so a very good product all around. Very pleased with the result. Thank you Webike for your hard work. View detail
Fits: APRILIA RSV4 RF, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono, APRILIA Tuono, APRILIA Tuono, APRILIA Tuono, APRILIA Tuono, APRILIA TUONO V4 1100 Factory, APRILIA TUONO V4 1100 Factory, APRILIA TUONO V4 1100 Factory, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR
Is M6 still thin?
Installation 3 min.
If only this would make Maintenance easier!
This is the second time I've bought one of these, or maybe the last time, and one of them got bent.
I put it back and it broke.
Is M6 still too thin?
View detail
Fits: YAMAHA FZ1, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-10, YAMAHA MT-09, DUCATI Monster 821, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA XSR900, YAMAHA YZF-R1, APRILIA Shiver 750
Mainly used for maintenance
It works fine
Using it as a Slider is not a Recommendation at all.
View detail
Fits: APRILIA RSV4 RF, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono, APRILIA Tuono, APRILIA Tuono, APRILIA Tuono, APRILIA Tuono, APRILIA TUONO V4 1100 Factory, APRILIA TUONO V4 1100 Factory, APRILIA TUONO V4 1100 Factory, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR
Too bad about the type of Screw.
Installed on a Norton961Command.
I had been looking for this for a long time, and I wanted to install it as soon as it arrived.
The packaging was just the right Level.
When it came time to install the Bolt, the Tap on the Bolt was not installed.
Is there a bolt that is all cut and a bolt that is in the middle of a bolt?
Quantity:Pair (for Left and Right) If you think it's different, it's good either way.
So I had to give it 4 stars.
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R
It protected me well.
I installed these on my ZX-6R (2012) which I use only for circuit driving. I installed it as a contingency plan, but once during a run, the front of the bike slipped on the Left Corner and the bike tipped over in a matter of seconds. The Offset Slider was scraped off, but the Swing Arm was intact and protected me well. The Bolt that was attached to the Swing Arm did not break either.
I have installed them in various parts of my ZX-6R as a precautionary measure, but considering the direct damage to the component parts after a situation occurs, I felt that the cost-effectiveness was extremely large. I am very glad I installed it. I highly recommend it.
View detail
Fits: SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, TRIUMPH Thruxton 1200, TRIUMPH Thruxton 1200, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSR750, SUZUKI GSR750
One of the best
I used to use Anodized Finishing, but the color faded and peeled off, so I decided to use Material:I chose Plastic. The color does not fade, does not peel, and is offset, so when you hang a hook on it, the hook is less likely to hit the frame, so it is less likely to get scratched.
I have been using it for years and it has lasted a long time.
Scratches will be applied, but Material:Plastic, so it remains in Black color.
View detail
Fits: SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, TRIUMPH Thruxton 1200, TRIUMPH Thruxton 1200, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSR750, SUZUKI GSR750
No difference
I purchased this product to improve the appearance of the image rather than to maintain it. It was a good decision to buy it. View detail
Fits: HONDA VTR1000SP, HONDA VTR1000SP, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI SV1000, SUZUKI SV1000, SUZUKI SV1000, SUZUKI SV1000, SUZUKI SV1000, SUZUKI SV1000, SUZUKI SV1000, SUZUKI SV650 (1999)
A few seconds …
It was installed in seconds without any discomfort!
It's perfectly normal;
View detail
Fits: YAMAHA FZ1, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-10, YAMAHA MT-09, DUCATI Monster 821, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA XSR900, YAMAHA YZF-R1, APRILIA Shiver 750
It could be a Slider with a Large swing.
I used it for MT-09SP. The compatibility with JTrip is not bad.
I don't know how it will work with other STANDs.
Yamaha for some reason is thin on the M6, so you shouldn't raise it up and straddle it with maintenanceSTAND because of the strength concerns.
View detail
Fits: APRILIA RSV4 RF, APRILIA RSV4 RF, APRILIA RSV4 RF, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA TUONO V4 1100 Factory, APRILIA TUONO V4 1100 Factory, APRILIA TUONO V4 1100 Factory, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4
I haven't tried the effects of Slider, so...
It's installed on the RSV4.
I bought it because I thought it would be useful as a Slider and Stand Hook.
Installation is very easy.
Just remove the OEM chain adjuster and replace it.
It looks and parenthesis better!
However, its effectiveness as a Slider is still unclear, so we'll save the imprints for the future.
The effect as a Stand Hook is that you can use it normally, but it has to be in the normal Hook position when you load it in your car, as it will be further back than the normal position.
As a result, I don't use it as a Stand Hook.
View detail
Fits: SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, TRIUMPH Thruxton 1200, TRIUMPH Thruxton 1200, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSR750, SUZUKI GSR750
It's easy to use with the size feeling there.
It was installed on the Swing Arm of DL1000 V-STROM650, and it is also used on DL1000 V-STROM1050XT after the vehicle replacement.
I used a V-Hook for my JTrip Rear stand, which makes it easy for one person to STAND-UP.
The included Bolt is a bit cheesy, but it's a Black Swing Arm, so it matches the Black body.
View detail
Fits: DUCATI 899Panigale, DUCATI 959Panigale, DUCATI 959Panigale, DUCATI 899Panigale, DUCATI 899Panigale
Although it is installation other than compatible cars, ...
I installed it on aprilia caponord 1200.
Conformity Parts is a product that almost searches various items for car models that are almost none.
Because the product description is written as special design for DUCATI Panigale 959, I thought that it is different from ordinary M6Size of Universal? It is an ordinary Stand Hook. Well a little Smark is it?
Because overseas Brand or the price is reasonably expensive, it takes delivery time as well.
I would recommend the colorful thing of other companies to those who do not have insistence ....
In the case of me, FrontCB 400 TGuard and Bar end slider made it by R & G, so I chose to give a sense of unity.
View detail