Reviews
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
unaffected and sober
I chose it for its simple appearance because it is supposed to be left on. It works well when on duty without asserting itself. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Essentials for Maintenance
Purchased to use the Racing Stand during maintenance.
Therefore, I purchased the least expensive MORIWAKI product, but there is no problem at all in using it.
On the other hand, I wonder if there is any added value in what is effective.
We use STAND made by JTrip, and the body is upright and stable, giving us a sense of security when servicing.
Highly recommended if you are not particular about the appearance.
View detail
Simple stand hook roller
[How is it used?
YamahaYZF-R1 (2CR) The stand hook is used as a Stand Hook for the
I would have been happy with any manufacturer's product, but I bought it because it was an inexpensive and reliable MORIWAKI product.
Was the one you received as per Image?
The quality and texture were absolutely perfect.
I'm not sure about the M6 Bolt, as it is a Yamaha car. (Lol)
Was the installation difficult?
It takes less than a minute to install because all you have to do is round and round with a Hexagonal Wrench.
How was your experience with it?
Simple stand hook roller.
There is nothing special to mention, but it is working fine.
[Included Parts:were they on?
Quantity as shown in the product image:It arrived as a Set.
[Was there anything that disappointed you?
Not particularly
【Review】
This stand hook roller is inexpensive and safe to use.
If you are not particularly particular about the design aspect, I would recommend it.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Moriwaki branding would be a nice touch
Nicely machined & fit for purpose. They screw in easily to the mounting points on the stock swingarm. Such a shame that moriwaki neglected to place their logo somewhere on this product, it would have been a nice touch. View detail
In any case, it should be from a reliable Manufacturer.
To be honest, I could have chosen any stand hook, since all stand hooks are equal in performance, but I wanted to choose one made by a well-known and reliable manufacturer, so I decided to go with MORIWAKI. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Best Match for z900rs
To prevent the STAND from interfering with the swing arm of the z900rs, the hook is of a long type, which is something that only MORIWAKI, who is well versed in motor cycles, could have done. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
cheap
Cheap and this quality can be scratched with confidence.
It hangs a Y-shaped Hook and gets scratched, but that's the way it was in the first place.
I think cheap is justice, and this price is reasonable for MORIWAKI.
View detail
Buy for Maintenance
I replaced the Swing Arm with a Swing Arm that allows for the attachment of a Stand Hook, so I installed it.:I was considering DURACON, but it was too expensive.:I purchased Aluminum.
The installation itself does not seem to be difficult, but the Bolt included in the kit was 1.25 pitch and did not fit, so we had to purchase a separate Bolt.
We recommend this product because of its low price, despite being a product of a well-known manufacturer.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
I am satisfied with the solid construction and Large change.
It is well made and I am satisfied with the Large change. View detail
899 Panigale is M6
I bought M8 by mistake for 899 Panigale use, but bought M6MODEL because of its good texture.
Simple and robust design was highly satisfactory.
View detail
Bolt size was wrong, but the quality was high.
I tried to use it on my Panigale, but gave up installing it because it was an M6 instead of an M8.
However, we switched to M6Spec. because of its higher quality compared to the price.
The product was designed with no problems in installation and the texture of Aluminum, and was recommended.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Used at J-TRIP's Rear stand
J-TRIP's Rear stand (V-receiver type 1) I was looking for a small bolt, but it was too ostentatious. I honestly chose it for the price, but it is a solid and rigid product. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Simple but very well done.
Various manufacturers offer elaborate designs, but this is the simplest and most affordable. The quality is also satisfactory.
We have not actually used Stand Hook, so its functionality is unknown.
Perfect for a quick dress-up.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Parenthesis good
I really like the design. I have used the STANDY many times with no problems. However, when I stand it with the STANDY Hook, it slips a little and scratches the Swing Arm … I have to do something about it. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
The best
Bought at a good price. Will inform you around. We will repurchase if necessary. Thanks for the good stuff as always. everyone a safe rideWishing!! View detail
Used for VTR1000SP2
The Swing Arm is Silver, so I installed it to match the Silver. I am satisfied with the appearance of the product because it is a definite Manufacturer! View detail
Easy to use
I used it as a Stand Hook, but it is stable and can STAND.
It is also good for the custom look.
Installation is easy and the quality is very good.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Works well for the price
If you want a stand hook roller that would look like an original equipment of the bike, you can consider this one from Moriwaki. It is just that it is too plain and simple, I wish they were able to put the Moriwaki logo in this roller. View detail
Stand Hook of your dreams
Used on a CBR600RR PC40 vehicle with diverted Swing Arm.
Before the Swing Arm was diverted, there was no Stand Hook boss, and an L-shaped maintenance stand was used.
To begin with, none of the motorcycles I have owned so far had stand hooks, and it was one of the parts that I had been longing for.
I was humiliated when every Maintenance Stand I tried to rent was a V-shaped receptacle…… lol.
By the way, I have heard that Honda cars are Large Residential M8.
Of course, the CBR600RR PC40 was also compatible with the M8Type.
Stand HookBody is Anodized Material:I think it is Aluminum.
Bolt is Material:It was a Stainless Steel hexagonal Flat Cap Bolt.
Installation should take less than a minute.
It feels good to use, and I had some doubts about whether it would be that convenient. I had some doubts, but this is certainly convenient.
I definitely feel less nervous and cold sweat when I hang the maintenance stand by myself than when using the L-shaped receptacle.
I feel that the bending of the receiving parts of the Maintenance Stand is somewhat less than that of the L-shaped receiving parts (or is that just my imagination?). (Or is it my imagination?).
I now understand a little more about people who put bosses on Swing Arm even if they have to weld them on afterwards.
Quantity for at least Stand Hook:Pair (for Left and Right) to jump out, so I am wondering what the impact would be in the event of a fall.
Sometimes I see vehicles that are bent or bent …….
Well, if you care, you will lose lol.
View detail
Mostly satisfied!
[How is it used?
I use it on my YZF-R25 which has been converted to Racer.
Was the one you received as per Image?
It was just like the Image! You can feel the aluminum from the image, so Material:I thought it was Aluminum.
I guess I just thought it was lighter than I thought it would be.
Was the installation difficult?
If you have the Hex tool, it only takes a minute or so to complete the swap!
How was your experience with it?
It's slim and doesn't interfere with the Stand Hook, which is nice.
The previous Ethos had a thicker hook and would catch when you had to STAND on it.
So I chose this slim one from MORIWAKI EngineerRing.
To be honest, it was also cheap. (Laughs)
[Included Parts:were they on?
It comes with an M6 countersunk screw.
[Was there anything that disappointed you?
Not at all!
View detail