Reviews
Fits: YAMAHA R1M, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA MT-10, YAMAHA MT-10 SP, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09 TRACER, YAMAHA YZF-R6
It was expensive to prevent Rust.
I have attached a Stand Hook even though I do not have a Maintenance Stand. The purpose is to prevent bolt hole rust.
I ordered at Tension at night even though I'm not particular about K-FACTORY, and when I reconsidered, it had already shipped and I was done with it.
If you want to prevent Rust, you can use a cheap one.
As mentioned above, I don't have a maintenance stand, so I don't know how I feel about it, and I don't have any feelings for K-FACTORY as dress-up parts.
View detail
Fits: SUZUKI DL1000 V-STROM650, BMW S1000RR, BMW S1000RR, KAWASAKI Z1000, KAWASAKI ZX-10R, KAWASAKI ZX-25R, KAWASAKI ZX-6R, SUZUKI GSR750, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-S1000F, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX250R, SUZUKI SV650, SUZUKI KATANA, SUZUKI GSX-S1000, KAWASAKI NINJA250
Easy and clean!
It's easy, beautiful, and a dress-up! View detail
_TS.jpg)
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI ZRX1200 DAEG, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
for safety lift
The surface is very clean, and the installation is very easy. Fasten the enclosed bolt to the swing arm. The surface is smooth and beautifully finished It looks strong enough. The lift requires a spool-shaped hook receiver. Please refer to the picture Also, if you apply rock tight when you do bolting I think we can prevent loss in advance. View detail
Fits: SUZUKI DL1000 V-STROM650, BMW S1000RR, BMW S1000RR, KAWASAKI Z1000, KAWASAKI ZX-10R, KAWASAKI ZX-25R, KAWASAKI ZX-6R, SUZUKI GSR750, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-S1000F, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX250R, SUZUKI SV650, SUZUKI DL1000 V-STROM250, KAWASAKI KB4, SUZUKI GSX-S1000
That's cool.
I am installing it on a ninja1000-2019.
It looks cool.
It is pricey, but I am glad I chose this one.
It has only been STAND used a few times. Durability will be confirmed in the future.
View detail
Can it be used as a dress-up?
Color as per Image?
Would you like a little more size upVERSION?
View detail
Fits: KAWASAKI Z250, KAWASAKI NINJA250R, KAWASAKI NINJA250, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI NINJA1000, KAWASAKI ZX-12R, KAWASAKI ZRX1200, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI Z250SL, KAWASAKI NINJA250SL, KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG
I guess it's one of the easy custom staples.
The ZZr1400 has a center stand, so it is unnecessary to say that it is unnecessary. After riding for a long time, you may want to add or change some new parts.
The quality of K-FACTORY's Stand Hook is considerably higher than that of inexpensive products with simple structures.
The black resin parts are designed to rotate, making it difficult to scratch the Hook or the Maintenance Stand.
I'm not sure if I'll ever get to use it while I'm using the Center Stand, but I'm happy with the little accent it provides.
View detail
K-FACTORY Stand Hook
I chose K-FAQ for the Front Axle Slider and Engine slider, so I chose the same manufacturer for the Stand Hook.
The price is Quantity:Pair (for Left and Right) It will be
I realize that the price is a bit high, but that is due to the design and functionality of the product. I think the price is reasonable.
As you can see in the image, it consists of 5 parts.
It comes with an Instruction Manual with the same picture as the Parts Structure, so it is easy to understand and even beginners can install it without difficulty.
The Z900RS has a screw hole for the Stand Hook, so of course it can be installed on the vehicle without any modification.
This Hook is a Roller, so it will go smoothly when you put it on the STAND.
(The purpose of the Hook is to be placed on the STAND, so it should not get scratched.)
You can choose the color of the Gold color at the top of the Parts Structure, so you can choose the color you like and buy it.
Very beautiful processing, and the K-FACORY logo is very stylish!
View detail
Please be careful after changing to LOWTypeExhaust System.
I have no complaints whatsoever about normal use!
The dress-up effect is perfect!
However, when it is used together with the exhaust system of LOWMount type of YOSHIMURA, it hits and shaves.
The suspension feels like it's bottoming out and thumping.
I usually took it off because I thought it would be too obvious.
I forgot to take it off and went to Touring and looked at it and it is shaved.
Fortunately, the Material is soft and did not puncture the Exhaust System side.
I don't think there is anything wrong with this Hook because this is a compatibility issue.
View detail
Fits: KAWASAKI Z250, KAWASAKI NINJA250R, KAWASAKI NINJA250, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI NINJA1000, KAWASAKI ZX-12R, KAWASAKI ZRX1200, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI Z250SL, KAWASAKI NINJA250SL, KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG
Focus on Design
I don't use it as a Stand Hook, I install it as an appearance Custom, I like the K-FACTORY logo in it and the texture is very nice. View detail
Dress-up fuses the original purpose
Black color included (For 900 RS) Do not use,
I was able to install on CBR with Bolt On.
The same place as a conventional AluminumStand Hook (back) It becomes gorigoru, and Anodized painting becomes troublesome at a great pace.
In this Stand Hook, since the DURACON section rotates with Inner Color attached,
It is possible to scrape uniformly instead of just receiving the same point.
Moreover, because it is DURACON it is easy to raise.
Aluminum and DURACON constitution makes it suitable for Dress-up + function effect.
Since the tray portion of V receiving also has width, it also prevents interference with Swing Arm.
It seems that it can be purchased as Aftermarket parts as well as the DURACON part consumed.
The disappointing thing is that the price is high.
I guess we can not stop doing it from Parts Structure, but I think that the sense of reasonable and satisfaction will also be raised for 4 thousand yen.
Recommendation for those who are tired of traditional Stand Hook.
It is a good part to work on Maintenance while you can not ride Motorcycle in the rainy season!
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSR750, SUZUKI GSX-R1000, KAWASAKI ZX-6R, KAWASAKI Z1000, KAWASAKI ZX-10R, BMW S1000RR, BMW S1000RR, SUZUKI DL1000 V-STROM650, SUZUKI SV650, SUZUKI GSX250R, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX-S1000F, KAWASAKI ZX-25R, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI DL1000 V-STROM250, KAWASAKI KB4
Sense is good.
Since K-FACTORY products are excellent in detail making, purchase. It also fully functions as Stand Hook.
Damage is somewhat somewhat unusual in terms of location and usage.
View detail
It is indispensable to a vehicle type without a Center stand. Maintenance work is comfortably.
It is indispensable to a vehicle type without a Center stand.
Maintenance work is comfortably.
View detail