Reviews
Genuine G-Craft Suspension Hools (stand bobbins) for Honda Monkey 125
Whilst I was ordering the clutch cover for the Monkey 125, the customer asked to order a set of these stand bobbins too so it would be easier to work on the bike. Not a problem and super easy to find. The cost is ridiculously low and for what you get for your money a cool. Witht he other parts in my order, I got them all shipped together to save some funds and were all delivered in 5 days. The stand bobbins came in the shrink wrapped packet and were well presented. These do come in 2 parts so are pretty straight forward to fit together, then it is just a case of bolting to the bike. The quality of these look awesome and do look like they will last a fair while. I did have my doubts with the small bolts but they do seem to hold up well. No issues there. Very pleased with how they fit sand how easy they are to install. Thanks Webike View detail
To change from L-Type to U-Type receptacle
Purchased to change from L-Type to U type nut. The installation work itself is simple, but the nut holes are gapped because of the load applied when the pure STD nut is removed.
When installing this product, Jack or lifting force to lift the vehicle body is required. After installation, maintenance stand work is safer.
The gap between the ground and Tire is about 55mm with AstroPROducts MiddleRear stand.
View detail
They Do Offer a Much More Stable Platform to Work on the Monkey 125
About quality and texture: I am happy with the quality of the suspension spools from G-Craft. The spool is made up of two parts that are secured together with the included fastener. The material used is aluminium with the black surface being anodized and the silver surface being a raw finish. About the feeling of use: I find these spools a useful addition when working on the Monkey 125 from cleaning and lubricating the chain to stabilizing the rear end to allow the front end to be lifted to remove the front wheel. Products to buy together: Some lifting hooks for your rear servicing stand would also be desirable to purchase alongside the suspension spools. Difficulty of installation: The process to install takes about 10 minutes. Remove the OEM Honda rear shock nut and install and torque down the silver part of the spool and then install align and tighten the black part with the included fastener. Repeat the process for the other side. Not difficult to do. Cost performance and comparison with other products: High costing but you are getting quality materials and finishes with this product at a higher price as compared to the stainless steel option available on Webike and the even cheaper quality option available elsewhere. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: You may think these suspension spools are not neccessary but they do offer a much more stable platform to work on the Monkey 125 then just using the platforms on the rear servicing stand. View detail
Rear Suspension Hook from G-Craft
* About quality and texture, A two part hook machined from aluminium. Extremely light weight but also very strong to take the weight of the motorcycle when the rear maintenance stand is used. * About the feeling of use, Having these hooks fitted to the rear suspension lower mounting points does not stand out or draw attention which allows then to retain fitted at all times readly for when the rear of the motorcyle requires lifting. * Products to buy together, If you are one that loves looking after your own maintenance then also add the front stand hooks to your order also and that way you'll be covered for any future maintenance. * Difficulty of installation, Installation from simply removing then rear suspension lower mount nuts and replacing them with the hooks that thread on. The process was completed in 15 minutes with no difficultly. * Cost performance and comparison with other products, There are cheaper options from other brands but I was happy to pay the extra dollars for a well designed part and to pair these with my other G-Craft billet parts. * About shipping and packaging, I am happy to wait 6 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, Webike have this same part for almost half the price from H2C G-Craft if you are happy to wait 6 weeks for stock to arrive. Use the product reviews to assist in making a decision on your purchase. View detail
Suspension Hook
About quality and texture - Excellent quality, the modular part fits together perfectly and has a really nice surface finish. About the feeling of use - Works great together with my paddock stand but the surface finish has become slightly damaged from the steel hooks. Products to buy together - These pair nicely with the G Craft billet chain adjuster, product # 31263. Difficulty of installation - Easier then easy, remove the rear shock lower nuts and fit. Cost performance and comparison with other products - This part is expensive but I did not see many options available and I needed a way to raise the rear of my motorcycle safely for maintenance. About shipping and packaging - When EMS shipping is available it is cheap and arrives in about a week so no complaints and arrived safety with plenty of air pillows for protection. Any concerns, cautions, or advice when purchasing - If you are in a rush for your part make sure to check the stock level and even message Webike for a delivery date estimate as these seem to be lower in stock most of the time. View detail
Image change!
What made you decide to buy?
Longing for the Parenthesis of Racing Stand Hook I switched from OVERSwing Arm to G-CraftSwing Arm! These are the Parts I've been wanting to put on...not on the Overswing Arm! It's one of the Option Parts
How was your experience with it?
The manufacturer's recommended STAND is a combination of the J-TRIP Racing Stand and a durable plate holder The manufacturer recommends the combination of the J-TRIP Racing Stand and the durable plate receiver, but currently, the AP Racing Stand and the plate receiver are recommended I have been patient with the StandL receiver and have been using it as I have been I can't wait to try it out to see what it's like
Was the installation difficult?
Degrease the Racing Stand Hook installation part and apply medium strength screw lock agent to it G-CraftSwing Arm manufacturing accuracy It is easy to install due to the good quality of the
What is the point or hang of the installation?
When purchasing G-CraftSwing Arm, you will have the option to choose the Chain Pull option Standard Type (Racing Stand HookSpec.) or the G-CraftSwing Arm When you select the Racing Stand HookSpec. OWTypeChain pull Racing Stand Hook can be installed No Stand HookBase is available
Do you have any wishes or suggestions for the Manufacturer?
Currently, we only have the Racing Stand Hook in Gold and Red Blue is also an attractive color, but it would be nice to have a choice of several more colors Also, it would be nice if you could sell the G-Craft Racing Stand? I think it would be nice if you can sell the G-Craft Racing Stand?
[Do you have any products to compare it to?
Option for G-CraftSwing Arm purchase:Racing Stand OW of HookSpec
and Stand HookBase (M6)
View detail
I'm glad I bought it!
It was helpful to be able to share the STAND with a Large Motorcycle I thought I would have to buy the receptacle as well, but I found some good Parts and they came in handy Easy to install too! View detail
It's expensive, but a boon
Hook on to the Swing Arm for Mini bike
Rubber type STAND says
In the case of this MONKEY125, the
The Swing Arm is very slippery because of its oval shape
and the paint peels off easily
The anxiety factor is Large, and every time I work
I didn't want to see the scarring grow
I finally bought it
The size is larger than I imagined, but it's more noticeable than I expected
I think it's a good way to feel different
The Instruction Manual strongly recommends the use of screw inhibitors
Creating Parts that are structurally prone to loosening
We're in a location where there's a lot of vibration
If you are about to wear it, you should be careful
Whereas the Cap Nut that fastens the lower part of the OEM rear suspension is 14mm
This product has a 19mm nut
To be able to manage torques when wearing them
It's a 19mm deep socket and glasses, but it's torque-managed
I suggest you buy tools
View detail