Reviews
Satisfied with functionality and appearance
I think it's a good costumer
It may be the cheapest Stand Hook with Slider function.
View detail
Swing Arm Protection
It doubles as a Stand Hook and Slider.
A light fall will provide protection.
Large falls make the bosses flinch.
That's right
Because it is easy to use.
I would like to modify the mounting Bolt.
Installation is a cinch, as only Screws are required.
View detail
Protect Axle Shaft and Arm.
[How is it used?
Purchased for fall protection. It mainly protects Axle Shaft and Swing Arm. (For protection of the entire body, it should be used in conjunction with Engine Guard or similar.)
Was the installation difficult?
Bolt On makes it easy.
How was your experience with it?
After tightening the bolt, the Roller was a little reluctant to move, so I greased up the Spacer section a little.
I don't know how it works with Racing Stand as I don't have it.
View detail
Material:Plastic is sufficient.
With Gold, you will be disappointed when scratches appear while using the product.
Material:I like Plastic because it doesn't show any crumbs and is very simple.
View detail
A-TECH Earplugs
At a quick glance, the texture is no different from TRI*ST*R and this Slider.
The packaging is insanely kind, protecting the Screw part with Tape to prevent Garbage, etc. from sticking to it.
StickerQuantity as a bonus:1 Set of 2pc.
Just in time for earplugs, man! (This product is HookSlider. Good kids don't copy it!)
View detail
Stand hook slider
The gold and plastic parts are not crimped on one side, so it turns round and round, but it is still usable. View detail
Slider for both Stand Hook and Slider, so it may be safe.
I don't know how effective Slider is, but I expect it to be.
It is perfect for the Stand Hook function.
A collar is included to prevent interference with the car body when using Stand Hook.
View detail
Swingarm spools with sliders
I needed some spools to lift the rear of my Suzuki SV650 with my race stand for maintenance and this product served that purpose with the added bonus of also protecting the motorcycle in the event of an accident. View detail
Fits: KAWASAKI NINJA250R, KAWASAKI NINJA400
Would it look better if it was a little smaller?
It's easy to install and when using the Maintenance Stand, it's nice and stable, but
Normally, I would have preferred to go a little smaller because it would have been unnecessary to stand out
View detail
Fits: KAWASAKI NINJA250R, KAWASAKI NINJA400
Small looking Slider
It looks like a Small Slider
It's a simple shape, but it's a nice touch
In terms of performance, because it rotates like a roller, it is
When using the Maintenance Stand
Raising it is more than the normal MaintenanceBolt I used to use before
It's easier to raise it
View detail
Be careful if you are using a ZrX catcher!
I bought this because I wanted to get the type with slider function It was able to install with no problem, but I used ZrX1200 for JTripSTAND and JTripZrX Please note that you cannot use Bracket if you are using a receiving Bracket and Slider hits and I can't lift up I bought this without any hesitation because the fitment for each car model was available, but I didn't think there was such a pitfall It was It's certainly not a problem to fit it, so it's fitfully malleable, but it failed... I drove it into the wall of the Garage I made it into a hat rack with LOL! View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
It was just as it was supposed to be
I was looking for a new Motorcycle that I bought that didn't have a Stand Hook The one made by the Gold genus has a beautiful finish, but the scratches were noticeable when it was used Material:I looked for and bought it in Plastic
I haven't used the STAND yet, but I'm comfortable with the look and feel of what it looks like It looks like it can be used
View detail
It's cheap.
In case of purchasing Z 900 RS, I got lost in Option main stand. The appearance is not good because the foot of STAND straddles the outside of the Exhaust System. I purchased this item by taking advantage of MaintenanceSTAND I was using with NINJA 2 Helmet50R. The function as Slider ??, in particular the Exhaust System side is obviously expected to be thin. It might be better to think only as Hook. View detail
It looks dirty
It attached to YZF-R3. I tried buying thought that it is superior in Webike Impression and it is not even a sticking part, but when it is attached, it is cheap and it is clamor to the despair of Design. I think that things out of Y's Gear are better. View detail
I had it mounted onto my motorcycle when it was still brand new. Just as I suspected, I had a fall when driving at high speed with the motorcycle that I wasn't yet used to at the time. It was scratched hardly but the engine had no damage. I left it sc
I had it mounted onto my motorcycle when it was still brand new. Just as I suspected, I had a fall when driving at high speed with the motorcycle that I wasn't yet used to at the time. It was scratched hardly but the engine had no damage. I left it scratched more than 10 years and decided it was a good chance to replace it with a new one. The instruction for use is written in hand writing and is inconsiderate. Well, I was lucky to know what to do. The spring washer was also out of stock. The one I got years ago had mounting holes located in the wrong position and I had to get holes opened, but this time they were in the right position. It might have improved. Also a rubber plate is attached to the mounting section. It maybe for anti vibration. The mounting screws have changed from black screws to plated screws. Guess they have improved during the years gone by. When mounting, you have to hold the engine with a jack to remove mounting screws. Also you'll need a long extension bar and universal joint to tighten the screw on the front left side because the exhaust pipe will get in the way. View detail
Diversion to ZrX1100
NINJA400 [NINJA400] , I sold what is sold for NINJA 650 to ZrX 1100.
Brake side is 5mm Spacer attached, Don Pischa, Chain side further 5mm Spacer is put in will surely eliminate negotiation between STAND Hook and Swingarm. (Although it can be used without adding 5 mm, we made room for it. )
I feel that raising the STAND has become easier because of the Roller formula. STAND on hand is old and it is saved because there is no Tire.
View detail
Maintenace Stand + For falling Guard
Since Screw for attaching Maintenace StandHook is vacant to Ninja 250, it seems that you can expect the function as Slider when you fall down by any chance at the time of using Maintenace Stand and also because it seems that you can also expect a function as a Slider, did.
Installation is really easy by tightening with HexaWrench.
Size - Material - I like the shape together.
I do not have items that I would like to take care of so much, but I wonder if Swingarm can protect me when I fall.
View detail
It is a product without a complaint. be absorbed -- it will choose and will be satisfactory.
It is a product without a complaint.
be absorbed -- it will choose and will be satisfactory.
View detail